MATRIXSYNTH


Friday, October 17, 2008

350 Computer - Sequencer - VEMIA

via this VEMIA auction
"Rare and interesting early sequencer from PPG. Has some quirks, but works fine and has some excellent features. Here's Lucid Sound's informal report after servicing it:- 'There were a few 'anomolies' with this, and very little info available on the web, but I've got it to a good useable state. It really is quite an innovative device. There are some great features here, like the ability to invert the notes in a sequence just by pressing a button, or 'immediate playback' where the sequence repeats what you've just played as soon as you lift fingers off keyboard (takes some explaining but it's good, trust me). Two transpose modes, immediate (waits until the end of the current note) or delayed (waits until the end of the loop) - brilliant. There is a sync in/out, which is a high frequency audio clock, so you can sync to tape, or as I did, use a VCO to control the speed of the sequence (great with an EMS). It's 1V/Octave out, positive trigger. A few strange things though: The 'manual' (translated and brief) says pressing middle C starts a sequence or any other key to transpose - not on this one, bottom C is no transpose, all other keys transposing up. There is a Gate output. This works from the keyboard but not from the recorded sequence even though the trigger output does - however even the guy who wrote the simplified manual that's avaailable online says, and I quote: 'there is no word HOW and what these trigger modes are (sorry!)' It'll also do real time recording, and there's a whole load of editing stuff (timing and pitch changes etc). In really nice cosmetic condition too."

PPG 1002 analogue monosynth - VEMIA

via this VEMIA auction

"Superb early rare interesting analogue monosynth in excellent condition. I can't imagine there is a much better example of this synth in the world. The CV in is a strange non-linear design, but tuning on its own keyboard is perfect. Thoroughly tested by Lucid Sound, some screws replaced, the whole instrument serviced and calibrated where necessary. It is in excellent cosmetic condition, with the panel almost faultless, and all knobs in original condition. One of the neat (EMS-like) 'magic eye' buttons has lost its iris, so that the orange bit doesn't disappear when it is switched off. The solid wood endcheeks show signs of its age, but look fine, and somehow right. The keyboard is level and in first-class condition. There is a bit of paint scraping on the back panel, visible in the photo, and the protective rubber shielding round the mains lead is slightly broken, and has been strengthened with gaffa tape. The mains lead itself is perfect and completely safe. Beautiful."

Synton-Three bow-tie / handkerchief sets - VEMIA

via this VEMIA auction

"Great fun - three mint unused unopened Synton promo bow-tie and handkerchief sets, in blue, red, and silver. Really nice moiree-type patterned material; a great piece of memorabilia. Very much from an era when men like Bob Moog and Felix Visser wore suits and had long conversations at trade shows. Sold in celebration of Synton, now that Felix is selling up his own gear."

Ppg-390 drum unit (rare prototype, n/p) - VEMIA

via this VEMIA auction
"NB: THIS MACHINE IS A PROTOTYPE AND HAS NO PROPER CASING. IT IS ELECTRICALLY UNSAFE WITHOUT PROPER SHIELDING. ONLY BID IF YOU ARE A TECHNICIAN OR WILL HAVE IT MADE SAFE BY A TECHNICIAN BEFORE USE. Incredibly rare early PPG drum unit. Search for this on the internet and you will probably find evidence of only one machine - this one! Check the photo to see exactly the same knob pieces missing. The front panel (apart from the little bits missing on one knob and the four knobs missing on the right) is in excellent condition, and doesn't look anywhere near the 25 or so years old it must be. It uses EPROMS for sound storage - one seems to be missing. The amazing thing is that despite its ramshackle internal appearance (the largest veroboard circuitboard is also wobbly, because there is nothing to support the top) it partially works. Four of the sounds trigger and are well usable in all their 8-bit retro glory, and in theory it should be possible to get everything back to working order without too much difficulty. 240V, standard UK mains plug. BUT ONCE AGAIN, PLEASE NOTE THIS MUST BE MADE SAFE BY A COMPETENT ELECTRONICS ENGINEER BEFORE USE."

Big Briar Model 331 Touch Plate - VEMIA

via this VEMIA auction

"The third of the touchplates that came from Bob Moog's friend and European accomplice Felix Visser, this was the Big Briar production model, although it still looks totally hand-made. This time, there are four controls, but all control voltages as well as any power are routed through the seven-pin DIN plug. Serial number 1024. Untested at present."

KORG PSS50 Super Section - VEMIA

up for auction on VEMIA

"Nice analogue-sound programmable drum machine / backing track / bass / chord pattern generator. Not in great cosmetic condition; and the start/stop button membrane has started to split; not tested fully - no manual - but everything seems to function as it should. Needs 9V DC (pin negative) simple PSU, not supplied, or batteries (not supplied)."

Waldorf Microwave - VEMIA

up for auction on VEMIA

Roland SH-101 + Juno-106 + EHX Memory Man Deluxe


YouTube via retrosound72

"intage synth demo track by RetroSound

bassline: Roland SH-101 internal sequencer triggered by the TR-606;
pads and fx sounds: Roland Juno-106;
drums: Roland TR-606;
effects: Electro Harmonix Memory Man Deluxe analog delay

no overdubbing, no sequencer software used"

Flame Echometer Groove


YouTube via flameampere

"The FLAME-"ECHOMETER" MIDI-sequencer with analog CV-outputs.
All sounds from analog drum modul MAM "ADX1" via Moogerfooger's RingModulator.
The session demonstrate a simple groove."

Flame Echometer Shuffle Beat


"The FLAME-"ECHOMETER" MIDI-sequencer with analog CV-outputs.
All sounds from analog drum modul MAM "ADX1" via Moogerfooger's RingModulator.
The session demonstrate the SHUFFLE-Mode."

Garage Sale 259

see the full post with more images on Buchla Tech

"Today's project was a broken 259. The modulation oscillator was not putting out anything in the sawtooth position of the switch. The Harmonics Order control was doing nothing, but voltage was effecting it. Judging simply from the outside of this module, I can assume it was not built at the Buchla factory, but was a kit purchased at the garage sale a few years ago. The blue LEDs (yuck!) and the black big knobs were the first tip off."

also see This ol' 281
PREVIOUS PAGE NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH