Tuesday, October 09, 2012
Grendel Modulat
Published on Oct 9, 2012 by Ebotronix
4ms Peg RCD
Cynthia Zero Oscillator
Doepfer A 118 Noise A 134 pan by Moog MP 201
Flame Chord Machine Talking Synth Modul
Grendel Formant Filter
Make Noise Maths Optomix Wogglebug
Malekko 4x Uncle
Serge VCS (VCO)
SSL Orgy
Tiptop Audio Z 8000
Toppobrillo Ouantimator Sportmodulator TWF
Logic Master Clock Kenton Pro 2000 II
Kick Logic Ultrabeat
FX Boss VF1 Line 6 Echopro TC M3000
moog prodigy vintage synthesizer walkthrough
Note: Auction links are affiliate links for which the site may be compensated.
Published on Oct 9, 2012 by RipUpTheSoundSystem
via this auction
Published on Oct 9, 2012 by RipUpTheSoundSystem
via this auction
WMD Gamma Wave Source – Eurorack Wavetable Modular Synth Module
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Three videos below. Description via WMD.
"The WMD Gamma Wave Source is a dual digital wavetable VCO that can create millions of timbres using onboard digital 'effects'.
The Controls
1V/Oct - Pitch input, used with standard 1 Volt per Octave keyboards and MIDI-CV converters. 0-5 volt input.
Pitch 1 & 2 - Controls the relative pitch per channel.
WT 1 & 2 Select - Select the desired wave table from the chart. 256 are available, each producing a different sound. Click for the table chart.
Out 1 & 2- Oscilator section output, each puts out +-2.5V/ 5Vpp signal.
The Effects Section
The GWS has four effects pipelines. Two for each oscilator. The Routing table selects how the oscillators interact with the effects pipelines.
FX Select Knob - Pushing this knob in will select the column that the knob is adjusting. Turning it will adjust the LEDs in the select column and will alter the Routing or Effects selection.
FX Para 1 & 2 - These knobs control the FX parameter for the oscillator section. Each effect has a specific parameter that is controlled by this knob. Adujust to taste.
Para CV & Attenuation Knob - This is a CV input for modulating and controlling the effects on the oscillator. Press the WaveTable Select knob to activate CV control per oscillator section. The LED will light when CV control is active. The FX Para knob will adjust the center or edges of the CV control depending on the selected effect.
Effects Table - These are the available effects, they are all created mathematically using 8 bit processing. The result is generally lo-fi and edgy, but smooth fat sounds are also possible.
LPF - Digital low pass filter, mellows out tone
HPF - Digital high pass filter, removes lows for brighter tone
Sharpen - Similar to HPF, but more aggressive
Bit Depth - Reduces vertical fidelity of signal
Bit Flip - Collapses signal in on itself, adds harmonics
Sample Rate - Reduces horizontal fidelity of signal
Sample Kill - Kills samples at a rate set by Para knob.
Sample Polarity - Inverts the signal at a rate set by Para knob
A+B - Adds the OSC1 and OSC2 wave tables and outputs
A-B - Subtracts the OSC1 and OSC2 wave tables and outputs
Routing Table - The routing table is depicted by the red rectangle. If no LED is lit, then effects are bypassed entirely.
A | B - OSC 1 -> FX A | OSC 2 -> FX B
AB | BA - OSC 1 -> FX A -> FX B | OSC 2 -> FX B -> FX A
AB | B - OSC 1 -> FX A -> FX B | OSC 2 -> FX B
A | BA - OSC 1 -> FX A | OSC 2 -> FX B -> FX A
AB | Byp - OSC 1 -> FX A -> FX B | OSC 2 -> No FX
Byp | BA - OSC 1 -> No FX | OSC 2 -> FX B -> FX A
CycA | B - OSC 1 -> Cycle forward through FX A | OSC 2 -> FX B
A | CycB - OSC 1 -> FX A | OSC 2 -> Cycle reverse through FX B
CycA | CycB - OSC 1 -> Cycle forward FX A | OSC 2 -> Cycle reverse FX B
RndA | RndB - OSC 1 -> Random FX A | OSC 2 -> Random FX B
When cascading effects (Osc 1 -> FX A -> FX B) the first effect in the chain has its parameter set by the FX Para knob ONLY in the top routing mode (A|B). This is then saved so that the tone can be retained during cascading.
Cascading Sequence - Properly cascading effects requires this process:
Set routing to (A|B)
Set first effect in chain and adjust parameter to taste
Set routing to cascaded mode (AB|B)
Set second effect (FX B) to taste using FX Para knob
Adjusting the wave table will retain parameter settings for the first effect in the chain..."
WMD Gamma Wave Source
Uploaded by WMDEffects on Jan 3, 2011
WMD Gamma Wave Source rhythms
Uploaded by Ben Davis on Feb 5, 2011
"First patch with the WMD Gamma Wave Source dual digital wavetable VCO. Just a simple test patch to hear the various waveforms and effects of this oscillator."
http://wmdevices.com/gammawave.php
Three videos below. Description via WMD.
"The WMD Gamma Wave Source is a dual digital wavetable VCO that can create millions of timbres using onboard digital 'effects'.
The Controls
1V/Oct - Pitch input, used with standard 1 Volt per Octave keyboards and MIDI-CV converters. 0-5 volt input.
Pitch 1 & 2 - Controls the relative pitch per channel.
WT 1 & 2 Select - Select the desired wave table from the chart. 256 are available, each producing a different sound. Click for the table chart.
Out 1 & 2- Oscilator section output, each puts out +-2.5V/ 5Vpp signal.
The Effects Section
The GWS has four effects pipelines. Two for each oscilator. The Routing table selects how the oscillators interact with the effects pipelines.
FX Select Knob - Pushing this knob in will select the column that the knob is adjusting. Turning it will adjust the LEDs in the select column and will alter the Routing or Effects selection.
FX Para 1 & 2 - These knobs control the FX parameter for the oscillator section. Each effect has a specific parameter that is controlled by this knob. Adujust to taste.
Para CV & Attenuation Knob - This is a CV input for modulating and controlling the effects on the oscillator. Press the WaveTable Select knob to activate CV control per oscillator section. The LED will light when CV control is active. The FX Para knob will adjust the center or edges of the CV control depending on the selected effect.
Effects Table - These are the available effects, they are all created mathematically using 8 bit processing. The result is generally lo-fi and edgy, but smooth fat sounds are also possible.
LPF - Digital low pass filter, mellows out tone
HPF - Digital high pass filter, removes lows for brighter tone
Sharpen - Similar to HPF, but more aggressive
Bit Depth - Reduces vertical fidelity of signal
Bit Flip - Collapses signal in on itself, adds harmonics
Sample Rate - Reduces horizontal fidelity of signal
Sample Kill - Kills samples at a rate set by Para knob.
Sample Polarity - Inverts the signal at a rate set by Para knob
A+B - Adds the OSC1 and OSC2 wave tables and outputs
A-B - Subtracts the OSC1 and OSC2 wave tables and outputs
Routing Table - The routing table is depicted by the red rectangle. If no LED is lit, then effects are bypassed entirely.
A | B - OSC 1 -> FX A | OSC 2 -> FX B
AB | BA - OSC 1 -> FX A -> FX B | OSC 2 -> FX B -> FX A
AB | B - OSC 1 -> FX A -> FX B | OSC 2 -> FX B
A | BA - OSC 1 -> FX A | OSC 2 -> FX B -> FX A
AB | Byp - OSC 1 -> FX A -> FX B | OSC 2 -> No FX
Byp | BA - OSC 1 -> No FX | OSC 2 -> FX B -> FX A
CycA | B - OSC 1 -> Cycle forward through FX A | OSC 2 -> FX B
A | CycB - OSC 1 -> FX A | OSC 2 -> Cycle reverse through FX B
CycA | CycB - OSC 1 -> Cycle forward FX A | OSC 2 -> Cycle reverse FX B
RndA | RndB - OSC 1 -> Random FX A | OSC 2 -> Random FX B
When cascading effects (Osc 1 -> FX A -> FX B) the first effect in the chain has its parameter set by the FX Para knob ONLY in the top routing mode (A|B). This is then saved so that the tone can be retained during cascading.
Cascading Sequence - Properly cascading effects requires this process:
Set routing to (A|B)
Set first effect in chain and adjust parameter to taste
Set routing to cascaded mode (AB|B)
Set second effect (FX B) to taste using FX Para knob
Adjusting the wave table will retain parameter settings for the first effect in the chain..."
WMD Gamma Wave Source
Uploaded by WMDEffects on Jan 3, 2011
WMD Gamma Wave Source rhythms
Uploaded by Ben Davis on Feb 5, 2011
WMD - Gamma Wave Source - Wavetable Morphing Test from Richard Devine on Vimeo.
"First patch with the WMD Gamma Wave Source dual digital wavetable VCO. Just a simple test patch to hear the various waveforms and effects of this oscillator."
http://wmdevices.com/gammawave.php
POLIVOKS Soviet Legendary 2-osc's Poly Synth
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The Polyvox is a duophonic analog synthesizer, with a 49-note (F-E) keyboard. It was made and sold in Russia (then USSR). It features two VCOs, a noise generator, one LFO, a filter (low-pass and bandpass), and two ADSR envelope generators. VCO1 can be cross-modulated by VCO2. Each ADSR can be switched to auto-trigger, each with independent rates.The sound is quite rich and somewhat harsh and aggressive. This is more of a space-synth. You can be sure that you will have never heard the sounds this one can produce.
It sounds like these old Yamaha CS-30's, but then fat filters like in Moogs. Polyvox comes with a lockable hard shock resistant aluminum case covered with plastic, also there are two plastic compartments attached to the inside..."
via this auction
"The Polyvox is a duophonic analog synthesizer, with a 49-note (F-E) keyboard. It was made and sold in Russia (then USSR). It features two VCOs, a noise generator, one LFO, a filter (low-pass and bandpass), and two ADSR envelope generators. VCO1 can be cross-modulated by VCO2. Each ADSR can be switched to auto-trigger, each with independent rates.The sound is quite rich and somewhat harsh and aggressive. This is more of a space-synth. You can be sure that you will have never heard the sounds this one can produce.
It sounds like these old Yamaha CS-30's, but then fat filters like in Moogs. Polyvox comes with a lockable hard shock resistant aluminum case covered with plastic, also there are two plastic compartments attached to the inside..."
Pristine Analogue Solutions Leipzig K
Korg Kaossilator PINK with Keyboard Grid Mod
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"amazing PINK Korg Kaossilator. the original!
comes with a keyboard grid overlay installed that makes it super easy to find notes. great reference point for jamming out.
this thing is so much fun! lots of hidden tricks that you can find on the internet (like the 4 bar trick)
the sounds are great, it loops seamlessly. has leads, bass, acoustic, sound fx, drums, breaks. everything u would want.
runs on AA batteries so its great for on the go jamming. also great for sampling, sound sources."
Soundblox Pro Multiwave Bass Distortion w/ built in EQ via this auction.
"has separate volumes for clean and distortion.
TONS of different distortion modes. sounds sooo good!!
multiband distortion breaks your signal up into different frequency sections and applies the distortion to each band before recombining.
the sounds u can get out of this thing are wicked. fuzzy, synthy distortions abound. can do tamer stuff great as well.
6 presets, and a morphing function that morphs between two different presets (AWESOME!)"
"amazing PINK Korg Kaossilator. the original!
comes with a keyboard grid overlay installed that makes it super easy to find notes. great reference point for jamming out.
this thing is so much fun! lots of hidden tricks that you can find on the internet (like the 4 bar trick)
the sounds are great, it loops seamlessly. has leads, bass, acoustic, sound fx, drums, breaks. everything u would want.
runs on AA batteries so its great for on the go jamming. also great for sampling, sound sources."
"has separate volumes for clean and distortion.
TONS of different distortion modes. sounds sooo good!!
multiband distortion breaks your signal up into different frequency sections and applies the distortion to each band before recombining.
the sounds u can get out of this thing are wicked. fuzzy, synthy distortions abound. can do tamer stuff great as well.
6 presets, and a morphing function that morphs between two different presets (AWESOME!)"
Access Virus TI2 Desktop Synthesizer
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
