MATRIXSYNTH

Q109 as a Divider

Published on May 9, 2013 Jeffrey Cecil

"I was playing with my newly acquired Q119 sequencer. I fed the gate to one of my Q109s to control the VCA, I chained that Q109s gate to my 2nd Q109 to control Freq Cutoff. I got a surprise in that as long as I keep the Decay setting on the VCA Q109 below the gate length of the Q119 feed, the chain to the 2nd Q109 will not reset. Thus, providing interesting Divider type behavior for fun rhythmic possibilities."

synthesizers.com

This one in via John L Rice

MOTM 485 Peter Gunn Sequence

Published on Feb 16, 2014 Jeffrey Cecil

"I did another little setup
Q114 doing the sequence to Q106 to Q150 to MOTM 485 to Q108
Q109 to Q150 CV
Q109 to Q108 CV
Some hand wiggling of the Q150, M485 and Q109"

MOTM 485 more demo

Published on Feb 16, 2014 Jeffrey Cecil

"Based on replies at Muffs, I calibrated the trimmers on the 485 a bit more and cut back the input to 1V p2p. Much better!"

This one in via John L Rice

First test of SOU 266r

Published on Jan 18, 2014 Jeffrey Cecil

Buchla in 5U MU dotcom format.

"Just finished building a Source of Uncertainty 266r module. The sound is all being created by the SOU through a Q107 State Variable Filter. No VCOs as voices. I'm using an SCM/RCD for the clock source going to the S&H part of the SOU, then out to the pulse inputs. Also, a couple of SSL LFOs and an SSL VCO in LFO mode going through an attenuator to control the CV. One of the SSL LFOs is clocking the SCM/RCD. West coast on East coast action!!

Sorry about the sideways camera. First time I've used the phone camera."

This one in via John L Rice