Roland JD-800

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Roland System 100m

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

112 Dual VCO
121 Dual VCF
130 Dual VCA
140 Dual Envelope Generator with LF)
150 Ring Mod / Noise Generator / Sample and Hold / LFO
181 Keyboard

SNs
112 021606
121 381206
130 101932
140 072292
150 091985

CLICK FOR MORE »

Minimoog Model D (Old Osc Board) SN 8136

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"All keys/knobs work well and it sounds as amazing as it looks with the older Oscillators Serial #8136 this one was made in Upstate NY. I'll throw in the very handy S-Trig cable which converts standard gate signals. If you need the kenton pro solo2 for proper CV conversion check out my other auctions for that one."

CLICK FOR MORE »

Switched Multiple - Easy DIY Eurorack Module

Published on May 27, 2020 Extralife

"This week I built a really simple diy eurorack project, the switched multiple. Simply, a signal can be routed to one of two destinations or neither via a toggle switch. It can also be used in reverse to send one of two inputs to a single output. It's a very simple project to build, requiring only a switch and a few jacks and some wire, with no circuit board needed.

I got the idea from watching Mylar Melodies' video, THE MODULAR MAGIC OF SWITCHED MULTIPLES: [posted here]

This is a 100% passive design, and active/buffered multiples may perform better with CV signals sent to multiple destinations."

Flame Mäander Synthesizer // Rain Drop Drones #TTNM

Published on May 27, 2020 THE TUESDAY NIGHT MACHINES

♥ SUPPORT: http://bit.ly/ttnm-support ♥

"Recorded the sounds of rain drops falling on our tent and added a slow drone synth jam with the Flame Mäander, running on a 9V power bank. In Cubasis 2 on the iPad Pro, I added Audio Damage EOS2 reverb, a little bit of Grind distortion and QuatroMod phasing to the mix. Video edited in LumaFusion."

THE TUESDAY NIGHT MACHINES Flame Mäander posts

Dub Techno Track made with vintage Quasimidi Quasar from 1994!

Published on May 27, 2020 Electronisounds Audio

WEBSTORE ► https://www.electronisounds.com/
PATREON ► https://www.patreon.com/DeanDaughters
SOUNDCLOUD ► https://soundcloud.com/electronisounds
INSTAGRAM ► https://www.instagram.com/electroniso...
TWITTER ► https://twitter.com/electronisounds

------------------------------------------------------------------------------------------------
"Dub Techno Track made with vintage Quasimidi Quasar from 1994!"

FEATURING:
I started making Electronic Music in the 1990's.
Over the past few years, i've been collecting some vintage gear from Quasimidi to try and recapture some of the feeling of making music all those years ago.
I recently acquired a rare, vintage Quasimidi Quasar rack mount rompler from 1994 with **BOTH** expansion cards installed - WHAT A FIND!!
This track was made ENTIRELY from sounds that I recorded directly into Ableton Live from the Quasar.
Not a bad track for 26 year old sounds!!
I hope you enjoy!

Whatever kind of music you are making - KEEP IT UP, Friends!
Don't stop making *YOUR MUSIC*!!

【エレクトーン演奏】Kombi - "Taniec w słońcu" / "Dancing in the sun" / 「陽だまりの中で踊って」 on Yamaha Electone D85

Published on May 27, 2020 adamstan84

"Taniec w słońcu" / "Dancing in the sun" / 「陽だまりの中で踊って」
muzyka (作曲): Sławomir Łosowski

Oberheim Matrix-6 SN 702692 w/ Custom Wood Side Panels

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

crOwBX 2.4 Voice Card. First Test

Published on May 27, 2020 TjimmyChonga

"Here's a first test of a crOwBX 2.4 voice card using a custom digital controller board.
The crOwBX is a clone of the legendary Oberheim OB-X, and one day I hope to finish a digitally controlled OB-X clone, using the crOwBX voice cards, but adding additional features, like multi timbral, modulations, etc.
This is not something I anticipate being done soon, given that I got these voice cards two years ago, but one day... In the meantime I keep changing the scope of the project so I'm not in a hurry."

Metroid Music - Kraid's Lair (Synth Cover)

Published on May 27, 2020 GLASYS

"My live arrangement of the Kraid's Lair theme from the original NES Metroid game, performed on the Prophet XL, Moog Matriarch and Therevox ET-4.

My Prophet X patch has multiple layers - a slow morphing synth, a piano, a choir, and some big drums that I bring in and out using an expression pedal.
That fast squiggly synth is also layered with the Prophet and was programmed with Steinberg Retrologue.
The Therevox is running through the Chase Bliss Audio MOOD and Thermae pedals.
The Moog uses it's own great stereo delay, as well as some Valhalla Shimmer.

New video every Wednesday! For the next few weeks, I'll be focusing on #Metroid music!"