MATRIXSYNTH

Circuit Mono Driver (Novation Circuit Mono Station thru Moog MF Drive)

Published on Aug 27, 2017 HardtekStudios

"For this Circuit Mono Station jam, I run the audio out of the C-Mono into the MF Drive pedal for extra distortion and to utilize the analog Moog filter. The Aux CV on the C-Mono is sending the Evvelope to the MF Drive to control the filter. The C-Mono is using a High Pass filter, while the MF Drive is using a Low Pass filter. So I am essentially using a serial Band Pass filter. also taking advantage of C-Mono's Osc Sync."

The Gristleizer Eurorack modules as a synthesizer voice

Published on Aug 27, 2017 Future Sound Systems

"A quick and dirty demo of the Gristleizer Eurorack modules working as a synthesizer voice, using the TG2 Generator, TG3 Filter and TG4 Modulator in a VCO-VCF-VCA chain.

Sequencing comes from the Korg SQ1.
Envelope comes from the Frequency Central System X Envelope.
Extra modulation comes from the Doepfer A-145 LFO.

Audio only demo available here:"

ETI Vocoder

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"THIS VOCODER WAS BUILT FROM ELECTRONIC DIY KITS ON SCHEMES FOR ETI ANALOG VOCODER"

Compare to this one minus the I/O and a different look.

CLICK FOR MORE »

32-BANKS ENSONIQ ESQ-1 SQ-80 ESQ-M ROM CARTRIDGE (1280 PATCHES)

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"1 in 16 cartridge with a total of 1280 patches. (32 Banks* 40 Patches)

The sounds are from the previous volume 1 and 2. The card has all kind of patches (instruments, synths, FX...)

Compatible with the ESQ-1, ESQ-M and SQ-80.

This cart is read only, patches cannot be written on it. (only read)

3D printed case, gold plated contacts and LED power indicator.

Patch List:

ESQ CARD A
--------------------------------
1: STRBAS 2: 5OFSWE 3: ELZPNO 4: JBELL5 5: FLTORG
6: DGSLAP 7: BASS2 8: BRSBAS 9: PSTEEL 10: KETTLE
11: FIDDLE 12: PANPNO 13: BASTE 14: SEQ 3 15: DG-BRI
16: SQREEJ 17: DGWHO? 18: KEBASS 19: DGPNO2 20: MINIM5
21: SHRTST 22: MODSTR 23: 12 STR 24: SQR SAW 25: ICESAW
26: BLPNO3 27: NOBHRN 28: GRIND 29: ARIEL 30: SITAR
31: PWRHIT 32: VELSAX 33: BRUSH 34: HITBAS 35: HARP 5
36: STARK 37: HELIO3 38: FALOUT 39: BAS R2 40: E STR

ESQ CART B
--------------------------------
1: ATMOS2 2: CTHDRL 3: ATMOS3 4: SLITAR 5: SLITDR
6: LOWSAW 7: BRETH2 8: AIRVIB 9: ZEUS.. 10: MEOWST
11: GRVYRD 12: SPOTS 13: CATBEL 14: PLKORC 15: ZIFSTR
16: BONES 17: BRETH8 18: ALLEY1 19: DRIZLE 20: DRAMA
21: CUTTER 22: SPONGE 23: WASTRG 24: CRIKET 25: THRUSH
26: FOREST 27: QUISIL 28: SKITS 29: BRETH9 30: STLGUT
31: CRYSTL 32: VOXRES 33: AUHARP 34: PIANO4 35: REVERB
36: COWBEL 37: MINIM3 38: VIBES1 39: HRPSI2 40: MINIM3

CLICK FOR MORE »

WALDORF MICROWAVE REV A

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This is the Rev A model with the sought after CEM 3389 analog filters. It comes from a smoke free home. This is how I bought it, I don't know what is wrong with it but I would start by installing a new power supply."

Some nice shots of the inside below.

CLICK FOR MORE »

Yamaha CS-60 Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.
Published on Aug 27, 2017 micronautical

"Needs work, but it's alive!"

via this auction

" This is a working Yamaha CS-60 Synthesizer with some issues. It is complete, however, and could be brought back to full playing capacity.

First, the good:
All components and circuitry are present, and all voices appear to sound (and are in decent tune, but could use fine tuning). Just about all of the sliders work, and all keys play as they should. The pitch ribbon works fine, as does the aftertouch on this synth. The glissando and portamento features work as they should, and the ring modulator and sub-oscillator features work.

Physically, there are no broken keys, missing switches, slider caps or knobs. The case is in good, solid condition, and the top cover is included and in good shape, too. The instrument is in fair physical shape, with no serious dings in any surface or tolex rips, but certainly with many scuffs and other signs of use. There are some chips on the control panel that can be seen in a picture or two.

NOTE: There are NO legs, music stand, or pedals included in this sale.

As far as specific features and playability, the synth is at about 80-90% functionality, but the issues described below obviously limit the range of what a player can do on this synth.

Unknowns: I haven’t tested pedals with this unit, nor have I hooked anything up to the EXT. jack in the back. I therefore cannot speak to the status of these functions.

Here are the issues:
1. The mystery issue is an overarching coming and going of volume on the presets, no matter what is being played or what features are being engaged. It occurs independently from the sustain settings. It’s as if the total output rises and falls (a la vibrato) in volume, in a predictable, pulsating manner. (Is this a sample and hold or other KBC logic / control issue? Dunno.) This doesn’t seem to be the case with the Panel and Memory settings.
2. The sustain seems to be stuck on.
3. Other issues are these: The ATTACK and DECAY slider controls for the ring modulator section don’t work; the green slider for UPPER on the Keyboard Control Brilliance interface doesn’t work; and the VCO and VCF sliders on the Aftertouch section don’t engage the sub-oscillator section as they should."

CLICK FOR MORE »