MATRIXSYNTH: ST Modular - MIA 2x2 Channel Mixer

Thursday, February 06, 2020

ST Modular - MIA 2x2 Channel Mixer


Published on Feb 6, 2020 Stefan Tretau



via http://www.st-modular.com/mia.htm

Details:
•2x2 Channel Mixer
•Volume Control for each Channel
•2 Channel Fader
•Fader Volume
•Wrong polarity protection
•Skiff friendly
•3U Eurorack module, 5 HP wide
•Power consumption: 35 mA at +12 V and 25 mA at -12 VThe module consists of two boards:
•Front PCB Panel
•Main PCB

MIA 5HP 2x2 Channel Mixer with Fader MIA is a fairly simple, but very handy 2x2 channel mixer with an optional fader output. CH1 & CH2 have two input jacks with VOLUME control potentiometers each. The signals inserted here will be mixed and supplied at the CH1 & CH2 outputs. Simultaneously the signal will be routed to the FADER. The summed signal of channel CH1 & CH2 will be available at the FADE output. Using the Fade potentiometer you may mix the two channels to taste. The overall FADE volume may be adjusted using the FADE VOL potentiometer. If there is a cable plugged into the IN A or IN B jack, the connection of the mixer channels to the FADER is interrupted. Thus you can mix 4 sound sources and fade two additional signals at the same time. Originally this mixer was designed to mix several VCO waveforms with the ability to route each of the mixed signal (from CH1 OUT & CH2 OUT) to external modules, such as effects and filters, and then again mix the externally proccessed signals (using IN A & IN B) to one single output (FADE out) via the fade circuitry. In some cases it might even serve as a stereo mixer.

No comments:

Post a Comment

PREVIOUS PAGE NEXT PAGE HOME




©2019 Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH