SUPERBOOTH 2021 - Radikal Technologies Eurorack Guitar Preamp

video upload by sonicstate

"Spotting a gap in the market, Jørg Schaaf the designer behind the Radikal range saw the need for a Eurorack guitar preamp so the RT1936 was born. Offering a clean guitar input with drive, EQ and an envelope follow it allows you to plug your axe directly into the world of Eurorack and process.
Or of course it can just be a guitar preamp, or be used to process any inpcoming signal
Available December €299
Thanks to Jason Jervis https://www.youtube.com/c/GetJervisSynth for the playing"

Bastl Instruments BUDDY // Stereo mixer with preamp and TRS inputs for hybrid setups and more!!!

video upload by Bastl Instruments

"Buddy is a four-channel eurorack stereo mixer optimized for hybrid setups. Channels A and B are optimized for eurorack sources (either mono or stereo) with a slight boost (×2 / +6dB). Channels C and D are line-level pre-amps that can boost the signal up to ×10 / +20dB and feature stereo TRS jack inputs for directly connecting desktop units without further adaptors. All channels feature a clean boost via the high-quality, low-noise NE5532 op-amp (same as on the Dude), which delivers smooth overdrive - that can be used to overdrive clean stereo signals. Several Buddy mixers can be chained via jumper cables on the back to expand the number of channels without losing precious inputs."

Behringer Introduces BRAINS Macro Sound Source Eurorack Module

video by Behringer



No mention of Mutable Instruments' Plaits/Braids, but it does appear to be based on it.

"Introducing Behringer BRAINS.

Amazingly versatile macro sound source for creating lead, bass and percussion sounds, as well as drones and soundscapes. With 20 digital oscillators, you can create a wealth of wild and out-of-this-world patches using chords, harmonic oscillation, particle noise, analog bass drum, snare, hi hat, super saw and even speech sounds. Dive into the world of sound magic.

List Price: $149

----------------------------------------------------------------------
Chapters:

00:00 - Introducing BRAINS
00:20 - Intro
00:37 - Oscilloscope
00:48 - Virtual Analog
01:03 - Waveshaping
01:22 - FM 2 Operators
01:39 - Grains
01:52 - Additive
02:09 - Chords
02:27 - Speech
02:46 - Karplus Strong
03:03 - Supersaw
03:45 - Wavetable
04:15 - Rain
04:27 - Noise
04:41 - Dust
04:54 - Modal String
05:08 - Drum Machine Connectivity
05:18 - FM Drum
05:33 - Bass Drum
05:47 - Snare Drum
05:56 - Hi-Hats
06:12 - Cowbell
06:25 - Tom
06:32 - Eurorack Connectivity
06:41 - Overview

Delay effect on BRAINS sounds examples from Behringer VD400."

CLICK FOR MORE »

「SLEDGEHAMMER」by SYNTHFOX ~overview~

video by SYNTHFOX Channel

"Overviewing my newest module, SLEDGEHAMMER. This is a wicked dynamics and harmonics processor with huge feedback play capabilities!"

SYNTHFOX Reverb Shop

"Meet SLEDGEHAMMER, a vactrol gate core experimental dynamics and harmonics processor. This module serves many needs, such as mixdown, wavefolding, waveshaping, distortion, VCA, suboctave generation, and much more. The three signal inputs - one with a dedicated thru-zero VCA, and four differently processed outputs provide endless tonal possibilities and a core module for creative patch-programming.

SLEDGEHAMMER is intended for heavy feedback usage. The INPUTS section mixes down three signals (audio or CV) for further processing. The first and second inputs have dedicated attenuators. The third input is special: it is a voltage controlled crossfader that fades between the negative and positive copy of the input signal. The FOLD output is normalized to input 2, and the SHARP output is normalized to input 3, so patching audio to input 1 and adjusting other inputs' volumes already creates a self-patched feedback loop.

The heart of this module is a vactrol-based dynamics processor ('gate') similar to the widely known low pass gates. It processes the mixdown of the three inputs from the INPUTS section: the big LEVEL knob, two Level CV (LCV) inputs and the PING input control both the amplitude and the slight filtering of the signal: from quiet and dark to loud and bright. The first LCV input has a dedicated attenuverter; the second one has a simple attenuator. The PING input expects a gate, and upon receiving one, will strike the gate with a sharp decay-only envelope. This input has a simple passive circuit behind it, which can be creatively exploited: for example, striking it with stepped voltages, e.g. a S&H output, will make the circuit skip some strikes, and the remaining strikes will have different velocity. The DULL / VIVID switch on the left chooses the type of the response: the DULL setting yields daker, quieter tones, while the BRIGHT setting makes the gate sound more open and loud. Both modes are useful in different applications.

Finally, the output of the gate core is passed through different harmonic processor to create the four SLEDGEHAMMER outputs: GATE, FOLD, BEND and SHARP.

CLICK FOR MORE »

Arcaico Kairos VCA-DELAY #modularsynthesizer #eurorack #arcaico #delay

Arcaico Instruments

"Kairos is analogue hybrid that reproduces the classic vintage BBD/Echo tape delay with VCA integrated, delay tone control and a dedicated wet out. The delay time range goes from 0.05ms to 1.1sec.

Technical specifications:

VCA (with attenuator)
CV time control (with attenuator)
TONE control delay
WET dedicated out
LOOP function
FEEDBACK control

10 HP
50mm deep"

"Reverb in eurorack format inspired by the infamous Reverberation Machine, built in THT technology with passive welded 'point-to-point' components, characterized by a VCA input and a post reverb distortion.

The input section is controlled by an integrated VCA. The TONE switch darkens or lightens the signal. The Decay, controlled in CV, through LDR resistor allows to create a large reverb: increasing the Decay to maximum level the feedback extends to infinity. The GAIN control allows to saturate the post-reverb signal. The RAVE button short-circuits the IN and OUT of the module, so as to obtain an infinite and self-regenerative feedback, creating auto-oscillation of the effect."

8knobsPortable synthesizer and midi controller. | Indiegogo

"8knobs is a portable synthesizer and midi controller. Right out of the box 8knobs creates drones and atmospheres (ambient soundscapes). 8knobs encourages learning synthesis, electronics, computer literacy and experimentation. Built on the popular Arduino platform it readily embodies the character of the user. It is an open source and hacker friendly instrument, ready to morph according to a wide range of use cases."

https://www.indiegogo.com/projects/8knobs--2#/

"8knobs can be used as a MIDI controller through usb, as a plug-n-play device; this means no installations, no additional convertors, no headaches. The 8knobs DIY kit consists of a PCB, an Arduino Atmega 32u4, header pins, potentiometers, all the necessary electronic components, mounting hardware, a laser cut wood veneer body and a case made of hand stitched jute with raw unbleached cotton.

8knobs has 1 audio out, MIDI over USB or MIDI over 3.5mm to connect to other traditional synthesisers. It can be powered via USB, DC 9-12v wall adaptor or a 9v battery.

DIY

// Electronics // Sound synthesis // Computer Coding

While building 8knobs you’ll learn everything from the basics like soldering to the fundamentals of sound synthesis, electronics and computer codes by understanding, engineering and experimenting with signal flow. Learn the art of signal flow by building your own custom synthesiser and controller for more experiments!

Experience

// Creative learning and new approaches

Getting familiar with signal flow unlocks a wide range of new opportunities to innovate and produce technical as well as creative applications in various media - both analog and digital.

Just like the flow of signals in the brain are interconnected and influence each other. For example, like neurons communicating information in both chemical and electrical forms, can result in infinite combinations of thoughts, words, and actions, similarly, playing with signal flow in hardware (electronics), software (coding) and space (acoustics) can result in infinite creative expressions.

The art of signal flow offers endless possibilities, and whether you take it up as a hobby or use it to pursue a life-changing innovation is for you to choose. Either way, it’s a great feeling to get your hands dirty in the energetic flow of signals and DIY culture!"

Also available in eurorack.

D&D Modules - We Wish You a Merry Christmas (on Modular Synthesizer)

Note this is the first D&D Modules post on the site. The above is a playlist of their current videos.

Playlist:
We Wish You a Merry Christmas (on Modular Synthesizer)
Heaven 16 - A versatile analog sequencer
Elvis Filter in action
Old school drumbeat 100% modular ! (sound from the cellphone)
Lord Of The Wah - Teaser
The Bodyplug - Overview (Part 1)
The Bodyplug - In context (Part 2)
Lord Of The Wah - Overview (Part 1)
Lord Of The Wah - LFO Control Voltage (Part 2)
Lord Of The Wah - Clock Controlled (Part 3)
Lord Of The Wah - Autowah (Part 4)
Lord Of The Wah - Use as a distortion (Part 5)
Noizes - D&D Modules
Steiner VCF - Yusynth by D&D

And some pics via http://sub-continental.com/dd/index.html

CLICK FOR MORE »

Frequency Central Seismograf BD and SD

Frequency Central

"A short Seismograf BD and SD jam, just randomly auditioning some of the drum types, and tuning/distort effects. No real plan!"

"Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, ‘BD‘ and ‘SD‘. As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our favourite electronic kits from yesteryear (see chart below). It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.

Select

This knob is used to select one of the 8 sounds to be triggered. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Tune

This knob may be used to detune the drum sound either upwards or downwards. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Distort

This knob may be used to introduce either one of two different types of distortion to your chosen drum sound. When set to the mid position (12 o’clock) no distortion is present. Turning the knob anti-clockwise will cause the sound to be progressively clipped harder, while turning the knob clockwise will cause the sound to be progressively more bitcrushed. This knob has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Secret Sauce

Try running the sawtooth output of an audio rate VCO into Seismograf’s trigger input, then wiggle the Tune knob manually, or apply a control voltage to the Tune input. Wow! What’s happening here then? When I first demo’ed this feature to Jetroid he buffered for a few minutes before performing a cold shutdown, unable to process what was happening to his code. Seismograf is acting kinda like a fliter, right? Well maybe! Probably more akin to oscillator sync really. As the incoming trigger is so fast, Seismograf only gets to play the initial part of it’s waveform, less on high notes, more on low notes. Additionally, there is naturally higher frequency content the higher the note and so forth. Whatever’s going on, we’re sure that you’ll agree that it sounds freaking awesome. More than just a drum module, right?"

"Seismograf is a PIC based drum module featuring coding by Jetroid. There is currently a choice of two PICs which may be used with Seismograf, ‘BD‘ and ‘SD‘. As you might expect, BD contains a range of 8 bass drums, while SD contains a range 8 of snare drums. The drum sounds are 10 bit encodings of some of our favourite electronic kits from yesteryear (see chart below). It is not possible for the user to load their own sounds onto Seismograf PICs, but there is a chance that we may release alternative drum sets as the years roll (!) by.

Select

This knob is used to select one of the 8 sounds to be triggered. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Tune

This knob may be used to detune the drum sound either upwards or downwards. It has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Distort

This knob may be used to introduce either one of two different types of distortion to your chosen drum sound. When set to the mid position (12 o’clock) no distortion is present. Turning the knob anti-clockwise will cause the sound to be progressively clipped harder, while turning the knob clockwise will cause the sound to be progressively more bitcrushed. This knob has a CV input associated with it, and when a jack is inserted into the CV input, the knob is used to attenuate the incoming control voltage. This CV input responds to 0V to 5V signals.

Secret Sauce

Try running the sawtooth output of an audio rate VCO into Seismograf’s trigger input, then wiggle the Tune knob manually, or apply a control voltage to the Tune input. Wow! What’s happening here then? When I first demo’ed this feature to Jetroid he buffered for a few minutes before performing a cold shutdown, unable to process what was happening to his code. Seismograf is acting kinda like a fliter, right? Well maybe! Probably more akin to oscillator sync really. As the incoming trigger is so fast, Seismograf only gets to play the initial part of it’s waveform, less on high notes, more on low notes. Additionally, there is naturally higher frequency content the higher the note and so forth. Whatever’s going on, we’re sure that you’ll agree that it sounds freaking awesome. More than just a drum module, right?"

ORPHO - VOODOO DRUM series |EURORACK TUBE DRUM MACHINE- BD RELEASE | EURORACK MODULAR DRUM MODULE

HOX808

"Das erste Modul aus der kommenden Voodoo Drum Serie ist die BD.

Zum Einsatz kommen zwei Russische Militärröhren vom Typ 6SH1P, die einen einzigartigen Röhrensound entstehen lassen.
Die 4 Parameter ATTACK, DECAY, FREQ.C.1 und FREQ.C.2 beeinflussen den Klang multilateral und stehen in Interaktion untereinander. Um die uneingeschränkte Ausnutzung des Parameterumfangs zu gewährleisten, fahren die Potentiometer ihre Einstellwerte in absolute Grenzbereiche und über sie hinaus. Beim Einstellen ist also etwas Behutsamkeit erforderlich. Der Trigger-Eingang reagiert dynamisch um akzentuierte Schritte zu ermöglichen. Akzeptiert werden Trigger-Signale von 0-10 Volt. Der Gate-Eingang reagiert konventionell.
Die BD wird ab 2021 erhältlich sein…
http://www.orpho.de/voodoo-drum-series/"

Googlish:

"The first module from the upcoming voodoo drum series is the BD.

Two Russian military tubes of type 6SH1P are used, which create a unique tube sound.
The 4 parameters ATTACK, DECAY, FREQ.C. 1 and FREQ.C.2 influence the sound multilaterally and interact with each other. In order to guarantee the unrestricted use of the range of parameters, the potentiometers drive their setting values into absolute limit ranges and beyond them. So some caution is required when adjusting. The trigger input reacts dynamically to enable accented steps. Trigger signals of 0-10 volts are accepted. The gate entrance reacts conventionally.
The BD will be available from 2021 ...
http://www.orpho.de/voodoo-drum-series/"

Lower West Side Studio Introduces M122 Master Divider Module

Lower West Side Studio - 2 Minute Tour - M122 Master Divider

"A quick video demonstration of the M122 Master Divider by Lower West Side Studio

The M122 Master Divider is a clock divider which splits the incoming signal into divisions of 2, 4, 8 and 16. Each division is then broken down into 4 phases.

It provides an easy, flexible way to break up your clock signal and produce interesting polyrhythms.

The M122 is a licensed reengineered version of Ken Stone’s CGS22 Master Divider

For more information visit lowerwestsidestudio.com"

via Lower Swest Side Studio

"M122 Master Divider $330 $290

The M122 Master Divider is a clock divider which splits the incoming signal into divisions of 2, 4, 8 and 16. Each division is then broken down into 4 phases.

It provides an easy, flexible way to break up your clock signal and produce interesting polyrhythms.

The M122 is a licensed reengineered version of Ken Stone’s CGS22 Master Divider

As a special introductory offer we have reduced the price of the M122 Master Divider from $330CAD to $290CAD until December 18th!"

Sonicsmith ConVertor E1 introduction, Eurorack pitch-tracking synthesizer

Sonicsmith

"The ConVertor E1 is not a marginal improvement. It's actually a total redesign of every aspect from the ground up, supplemented by a slew of new features. Don't let its small size fool you. This 3-PCB sandwiched module was designed to stay narrow so we can stack multiple units side by side for polyphonic sets. Only 100 units are expected to be manufactured for 2021."

via Sonicsmith

"ACO/VCO pitch tracking, expandable oscillator alongside a feature-rich, studio preamp.

The ConVertor E1 merges the pro-studio into the Eurorack modular synth into what can be called the ultimate “synth channel”. With its pitch tracking DCO alongside a preamp with many pro features for the instrumentalists and vocalist, or for the working musician professional/sound engineer/designer. All functions in the ConVertor E1 are digitally controlled and can be saved/recalled as presets for a plug n’ play, intuitive performance while leaving you with analog CV outs to continue your sonic journey. With MIDI 2.0 ready digital interfacing option, firmware and hardware expansion, and polyphonic options, the ConVertor E1 is an extremely versatile tool.

Currently receiving pre-orders, limited production run. Shipping late March 2021."

ST Modular - MULT (Dual Buffered Multiple), USB (USB Power Supply), UIT, Workmate SWAP, & GRITZNER

Stefan Tretau

Other Modules used:
VCO "Honeyeater"
VCA/FADE/DECAY "Fay 2"
FILTER "Werner"
LFO "Tryfelo"
OUTPUT "Uit"

ST Modular - USB (USB Power Supply)

"USB doesn´t make any noise, thus I patched Honeyeater and Werner for some background waves ;-)"

ST Modular - A patch with UIT (Balanced Out), Workmate SWAP (0HP Tool) and GRITZNER (PT2399 Delay)

Other Modules:

VCO "Honeyeater"
VCA/FADE/DECAY "Fay 2"
FILTER "Werner"
LFO "Tryfelo"
MULTIPLE "Mult"

4U Serge CROCODILE + TKB improvisation

fonitronik

"The new CROCODILE panel features an NTO with wave multiplier (middle section). No filter needed!"

Pic via RandomSource

Squid Salmple - Filters - Firmware Update 147

ALM TV

"The Squid Salmple now includes an independent multimode filter per channel! In this video we show off the sounds of the four different filter types while building up a basic track that utilises filtering on drums, bass, and chords.

To update your Squid Salmple to FW147 visit: https://busycircuits.com/firmware/alm...

SECTION TIME STAMPS
0:00 Intro - Filter Pages
0:36 Manual Sweeps / Filter Types
1:27 Creating a Bass Voice (single cycle wave)
2:45 Adding Chords
3:14 Engaging Filter on Chords
3:50 Modulating Drum Filter with Random CV
4:30 Outro

Thanks for watching!"

Mutable Instruments BLADES // Eurorack dual/stereo multimode filter, folder & saturator

DivKidVideo

"Here we have the new Mutable Instruments Eurorack module ‘Blades’. It’s a dual multimode stereo filter that can be used as a dual mono filter, stereo filter, dual filter in series of parallel blends with CV modulation over EVERYTHING! An exciting addition in the input stage which takes your inputs through a dynamic saturation stage that can also blend (so you can mix both together) across to a wavefolder. You can modulate the input drive so CV modulated saturation or wavefolding is possible before going into the filters."

A DUAL MULTIMODE FILTER…

A CV-controlled overdrive circuit capable of wavefolding.

A clean 12dB/octave multimode filter self-oscillating cleanly across the audio range.

Times two. And this could have stopped here.

FOR ALL THE IN-BETWEENS…

What sets Blades apart is that options commonly presented as multiple choices (low-pass or high-pass? serial or parallel?) are presented here as a continuum, ready to be explored at the twist of a knob or with a CV.

The filter response is continuously variable between low-pass, band-pass and high-pass, and delivers intermediate shelving responses, for more nuanced spectral coloring.

A dual crossfader circuit allows the routing between the two filters to smoothly vary from single to parallel to series.

AND MORE…

Originally thought as a complex filter, Blades turns out to be capable of much more:

A dual distortion with spectral color control?
An oscillator mixer with crossfading, wavefolding, and enough filtering to clean up the mess?
A voice, using one filter as an oscillator, then distorting, folding it and filtering it with the second filter?
A complex oscillator capable of FM, PM and AM?

CLICK FOR MORE »

ADDAC604 - Dual Filter - a little stereo filter that likes a little filth!

Oscillator Sink

"I bought the ADDAC604 Dual Filter module pretty much on a hunch - it fit the form factor and feature set that I was after but I struggled to find a demo so I had to just "trust" that I'd like it based on other filters in the ADDAC range.

So this video is the demo that I would have wanted to find before I made the purchase - hopefully it'll help you out if you're looking to pick up a stereo filter module some time soon!

Timings:
00:00 - Intro
00:38 - Features
03:20 - Mono Filter Sweeps
07:25 - Driving the Filter
10:14 - Mono to Stereo Upmixing with Filter Offsets
11:53 - Generic (albeit stereo) Acid Line
14:05 - Stereo Filtering
20:28 - Can We Track V/Oct?
21:46 - Pinging The Filter
24:11 - Parallel Bandpass Vocal Sounds
26:05 - Spectral Panning with a Single Channel
27:23 - Series Routing for Different Flavours
29:06 - Audio-rate Madness (pseudo-FM and percussion sounds)
32:11 - Final Thoughts"

"While developing our ADDAC105 4 Voice Cluster module we made a new multimode filter to place after the summing mix stage. We were so pleased with it’s sound that decided to release it as a dedicated filter.

To make it more interesting we duplicated its circuitry to be able to use it in a stereo signal path.

To make it more versatile we added a switch to set the working mode from Stereo to Dual Mono where both filters can be used independently.

In Stereo Mode the Left Cutoff is used to control the Right Cutoff.

In this case the Right Cutoff Knob and CV Input are simply bypassed and will have no impact on the Right Channel operation.

This allows immediate sync of both filter frequencies when the Stereo position is engaged.

Optionally there’s a jumper in it’s back that, when placed, connects the Right Controls back to the Right CV control allowing the possibility to control the offset of the Right Channel Cutoff.

Resonance is independent on both Modes and still has to be set manually to match both channels.

Both the Audio and CV inputs are normalled from the Left into the Right channels.
As standard plugging any input to the Right channels removes this connection.

This module will also be available as a full DIY kit.

Tech Specs:
6HP
4 cm deep
70mA +12V
70mA -12V'

Pharmasonic 710 Multiple Jacks in DOTCOM format

O.Z. Hall

"This is a short review of the 710 Multiple Jack (1/4") from Pharmasonic.
The SYS-700 Multiple 710 is a clone of the Roland System-700's 710A & 710B.
The panel is made of 2mm PCB material with shiny black finish.

Synthcube carries the Pharmasonic SYS-700 line in Eurorack format!

https://synthcube.com/cart/pharmasoni..."

kNoB technology AndOrNorXor Self Patchable Eurorack Boolean Logic Module Demo

kNoB Technology

"Andornorxor is a combined boolean logic device, consisting of logical elements AND OR NOR XOR and NOT (analog), as well as a small passive signal splitter, where each logic gate compares the voltages at its inputs and gives at the output the result of a mathematical equation, corresponding to the type of logical gates. The device is designed so, that the signal can be sent to all inputs on the AB, A, and B lines, or separately on each logical gate, the device independently connects certain signal paths, depending on which connectors are used at a given time.

Using this module, you can create sequences based on a variety of signals, process sounds, and create auto-generative patches
8HP 3U skiff friendly
Price 100$+ shipping
To buy write to us on knobtechnology@gmail.com

Time sections:
00:00 Hello
00:05 Block structure
00:16 Signal multiplication and sending
00:51 Inverting the gate signal
01:20 AND gate
02:00 OR gate
02:23 NOR gate
02:40 XOR gate
03:04 Adding more input signals
03:32 Logic gate transformation
05:03 Audio processing
06:30 Logic noise
07:28 White noise"

DIY eurorack modular synth $8 Envelope Generator with arduino / Make Noise MATHS type waveform

HAGIWO modular synthesizer channel

My third arduino projects.
Use Arduino and MCP4911 10bit DAC.

working documents ( Source code )
https://note.com/solder_state/n/nfaaf...

VCO: mutable instruments plaits
VCF: DSM01 Curtis Filter
Sequencer: division6 dual mini sequencer

Drum loop Thru Strakal Silisiom {dual silicon Morphing Fuzz with stereo out}.

TouellSkouarn

Strakal Silisiom, dual silicon Morphing Fuzz with stereo out.
Input volume, Feedback, Gain, EQ, Morph
Feedback and morphing are cv controlled.
Drum loop from 4MS's Stereo Triggered Sampler.

via TouellSkouarn

Strakal Silisiom

Dual Fuzz/overdrive with Morphing
The two fuzzes share the same controls. The Fuzzes and EQ are slightly differents (great for strereo). You can output the Stereo signal by plugin a stereo cable or you can output a mono signal : Fuzz1 - clock wise or Fuzz2 - counterclock wise, or a mix of the 2 fuzzes by turning the morphing pot.
Selected Silicon transistors
Mono input
Stereo output - with stereo cable
Mono morphing output - with mono cable
Feedback (with cv control)`
EQ (low high)
Morphing (with cv control) Clock wise Fuzz1, counter clock wise Fuzz2
Input Volume
Gain
Stupid Breton name