MATRIXSYNTH: Cavisynth Subway : Tips and Audio Demo

Saturday, September 26, 2020

Cavisynth Subway : Tips and Audio Demo

Robotopsy Robotopsy

"Some quick tips and audio demos for the SUBWAY of Cavisynth."

via Cavisynth

"A first VCO having four waveforms responds in frequency to 1V / OCT, the second VCO is absolutely identical, but it is possible to choose down to 7 octaves below the first and to vary its frequency to +/- 2 octave. You can turn it into a CV LFO. At – 7 octaves it oscillates so slowly that it becomes a controllable LFO in CV 1V/OCT and CV IN2 in exactly the same way.

With the “CF (CrossFade)” potentiometer it is possible to adjust the crossfade between the two VCOs in order to obtain very thick sounds.

You can choose between five wave formes for each VCO and if you select noise + noise you then have the punk mode (Fig.6) !

The Subway keep the chosen waveforms in memory after power off.

The CV2 input (0-5V) is successively assignable to each of the four potentiometers and the two waveform selectors."

No comments:

Post a Comment


© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.