Frap Tools Falistri Dual Movement Manager Overview by Learning Modular

Published on Jan 7, 2020 Learning Modular

"The Falistri Movement Manager is loosely based on a Buchla-style function generator – but it goes far beyond that, including the addition of a pair of flip-flops (frequency dividers), a four-quadrant (balanced, or “ring”) modulator, and linear slew generator that can be used by the function generators in the module or external modules.

I cover the Falistri in four movies: a basic overview, advanced envelope generator tricks, using it as an LFO, and using it as a VCO.

My Patreon supporters will have access to additional posts further discussing these features: https://www.patreon.com/LearningModular
This movie is also part of the extended Eurorack Expansion course available through Learning Modular: https://learningmodular.com/register/..."

Playlist:

CLICK FOR MORE »

Frap Tools FALISTRI Workout Episodes

FALISTRI Workout ep. 1: Four-Quadrant Multipliers
video upload by Frap Tools

"Wanna get the most out of your FALISTRI? Join today's workout on four-quadrant multipliers! No other modules allowed for extreme FALISTRI focus. Drink a lot of water and join us for this HIIT training!"

FALISTRI Workout ep. 2: Gates
video upload by Frap Tools

"Another HIIT session with two FALISTRI, this time we even managed to get some dynamic timbre modulation! Wanna see how? Join the workout, drink a lot of water and follow a healthy diet."

FALISTRI Workout episodes

Clock processing with USTA and FALISTRI | Frap Ideas

video upload by Frap Tools

"Today we'll see how to use FALISTRI as a clock divid... Dela... Multipl... Well let's say clock PROCESSOR. Check out this cross-patching technique with the USTA sequencer!

USTA: https://frap.tools/usta/
FALISTRI: https://frap.tools/falistri/

00:00 Introduction and patch description
01:07 Using FALISTRI as a clock
02:20 Clock delay / clock divider / wacky clock multiplier
04:52 Modulating the clock with the USTA"

Frap Tools Falistri & Instruo CS-L West Coast Eurorack Setup

Published on Feb 20, 2019 Perfect Circuit

"This eurorack setup is full of West Coast Serge and Buchla inspired modules. Frap Tools Falistri is a dual function generator that can be used as envelopes, oscillators, slews and more. It also includes a VCA/ring modulator. The second half of the video shows the Falistri as a dual oscillator and ring modulator.

The oscillator is the Instruo CS-L complex oscillator which is a dual oscillator with tons of modulation and wave-folding options built in for both oscillators. We used a Random Source Seq8 XL for sequencing.

Instruo CS-L available here: https://www.perfectcircuit.com/instru...

Frap Tools Falistri available here: https://www.perfectcircuit.com/frap-t..."

---
Supporters of MATRIXSYNTH get %10 off at Perfect Circuit!

Formant arpeggios patch breakdown: a classic Falistri patch!

video upload by Frap Tools

"Arpeggios without an arpeggiator? That's no magic, just the power of sub-harmonics!

We've been doing this patch for quite some time now, but we never released a complete, step-by-step tutorial on YouTube.

By using Falistri as a frequency divider, we can obtain perfect intervals in the minor scale by sweeping the rising and falling stages. It's roughly the same principle as Oskar Sala's Mixturtrautonium!

00:00 Intro
00:18 Using Falistri as a frequency divider
05:03 Using Sapèl to sweep through the sub-frequencies"

Programming the bass sound of West End Girls on a Frap setup was a tough challenge (but we did it)

video upload by Frap Tools

"So we were asked to remake the bass sound of West End Girls by @officialpetshopboys with only Frap modules, and here's how we did it! It's not completely there but still seems like a fair approximation. Got other ideas? Let us know in the comments!

Interview with Stephen Hague:
http://www.muzines.co.uk/articles/tra...

Modules used (all of them...)
BRENSO: https://frap.tools/brenso/
CUNSA: https://frap.tools/cunsa/
USTA: https://frap.tools/usta/
FALISTRI: https://frap.tools/falistri/
CGM: https://frap.tools/cgm/
321: https://frap.tools/321/
333: https://frap.tools/333/

00:00 Introduction and original patch breakdown by Stephen Hague
01:21 The FM 'thump' on the BRENSO
03:31 The Jupiter 6 sound on the CUNSA
05:37 The Emulator II kick drum on the CUNSA
07:59 Adding variation through the Ping input and decluttering the patch
09:23 Changing the envelope fall through the USTA sequencer
10:34 Balancing the resonance with USTA's COMBO mode
11:06 Adding an extra sawtooth to the Jupiter 6 sound through FALISTRI
15:14 Final result and closing remarks"

On tape loops, clocks, and sequences | patching Studio No.4 with Francesco Gennari

video upload by Frap Tools

"In his fourth étude, ‪@francescogennarimusic‬ crafts a meditative track by integrating a tape multitracker and a modular synth. The key feature of this patch is the synchronization of the two machines, achieved by using a tape track as a clock for the Usta sequencer, which in turn clocks everything else, from Sapèl to the ‪@empresseffects‬ Zoia."

Time stamps:
00:00 Introduction
00:20 Modular Performance
04:13 4 Track Tape Loop Overview
05:08 How to sync a modular with a Tape Multitracker
05:48 Fostex Routing and Signal Flow
06:17 First voice: Brenso + Falistri + QSC
07:49 Second voice: Falistri + Doepfer SEM Filter
08:19 Third voice: Brenso + Doepfer LPG
08:33 Gate randomness with Usta Variation
09:25 Writing melodies on Usta with external keyboard
10:09 Clocking Sapèl
10:30 Processing the tape with the Random Source Wave Multiplier
11:41 Empress Zoia - Dual independent Effect Chains

Developed Slope Generators with FALISTRI the 'Movement Manager' from Frap Tools at Superbooth 2018

Published on May 14, 2018 DivKidVideo

"Simone from Frap Tools takes us through FALISTRI their new 'Movement Manager' which will come later in the year. It's a new take and development on the familiar slope generators of the past and present which can be envelopes, LFOs, oscillators, slews, filters and more! There's also a processing section with Ring Mod and VCAs to control those 'movement' signals even further.

We're proud to have our Superbooth 2018 content sponsored by www.thonk.co.uk"

Frap Tools Falistri - complex oscillator "first patch"

Published on Jan 31, 2019 DivKidVideo

"So here's my first patch with the Falistri from Frap Tools. It's always nice to share my literal first patch and experience with modules before doing more in-depth demos and explanations. This first patch is using both function generators in looping mode, at audio rates, to create a dual oscillator and complex oscillator series of sounds. The Ring Mod and VCA section below takes normalled versions of the oscillator outputs and I have FM patched between both oscillators (function generators as oscillators) for some cross mod / x mod."

New Frap Tools Falistri Eurorack Module at SUPERBOOTH18

via STROMKULT

"This year at Superbooth18, Frap Tools presents a new movement manager. It is a function generator with lots of interesting features. The Falistri is a full analog multipurpose trajectory manager designed to generate and process voltages.

A big improvement over other function generators is the fact that you can change the shape of the envelope without changing the time – times are independent from shapes which can be different for each stage, for each generator. Thus you can really use it as an oscillator without altering the pitch when you change the shape of rise and fall.

The module can be divided in two big parts: in the upper two third of the panel take place tow specular function generators, while the lower third is composed by a dual cascaded frequency divider, a linear slew limiter and a four quadrant multiplier.

Both manual button and external trigger/gate input are available, and are used in three possible play modes. In the loop mode, where end of fall stage triggers the start of rise, incoming triggers are not needed, but if present reset the rise. In transient mode only the low-to-high transition of the trigger/gate signal is used to start the rise stage while the fall stage is automatically recalled at the end of rise. In sustained mode, the low-to-high transition of the trigger/gate signal is used to start the rise stage, while the fall stage is triggered by the high-to-low transition of the trigger/gate signal. A Gate input for switching from Loop to Transient mode and vice versa is also available on the module.

Thanks to a Quadrature mode (Q) you will be able to combine both function generators, connecting various stages together.

There are two function editors : cascaded frequency dividers and a four quadrant multiplier.

Each of the frequency dividers, also known as flipflop or sub-octave processor, changes its logic state each time a low to high transition is performed. The two sections are normalled so you can achieve 1/2 and 1/4 outputs from a single input which is very handy. This works as a sub-octave generator if an audio signal is used. With a clock at the input it works as a clock divider.

Furthermore, there is a four quadrant multiplier section with an exceptional linearity and a bandwidth from DC to more than 20 kHz. This can be used as a ring modulator or as a VCA with linear CV response. Thanks to the four led matrix, you can see which of the quadrant is currently in use.

Finally, there is a linear slew limiter which can process any voltage. With independent rise and fall slew rates, you can precisely smooth any kind of voltage transition.

Super expo shapes and double quadrature with FALISTRI!

video upload by Frap Tools

"Falistri has plenty of controls, but it offers functions so pure that we can bend the rules and use some cross-patchings to go where the knobs don't dare.

#fraptools #modularsynth #eurorack #synth #analogsynth #electronicmusic

00:00 Introduction
00:12 Double quadrature with the four-quadrant multiplier
05:33 Super exponential shapes with the four-quadrant multiplier or cross-patching"

Six interesting timbres with one FALISTRI (a patch-saving hack)

video upload by Frap Tools

"It happened to all of us: we're in the middle of a patch, and we ran out of complex sound sources. Luckily we have a spare Falistri, so here are six ways to get interesting timbres out of it!

00:00 Introduction
00:39 Number 1: The fake flip sync
03:31 Number 2: The force loop sync
05:54 Number 3: The Max output
08:34 Number 4: AM and RM
10:48 Number 5: Sub-octave-ring-modulated-flip sync
12:50 Number 6: Feedback ring mod"

Bird-like sequences with bizarre clocks thanks to USTA and FALISTRI

video upload by Frap Tools

"Time to explore more quirky interactions between USTA and FALISTRI!"

Check the other video here.

00:00 Introduction and patch overview
01:23 Using gates to switch the clock on and off
04:42 Changing the gate patterns
05:55 Using preprogrammed patterns instead of random events
07:10 Using an envelope to add ornaments

FALISTRI workout ep. 3: Retrigs

video upload by Frap Tools

"Today's workout focuses on the different retriggering options that we can find on FALISTRI. Let's see how much we can get out of them!"

Unexpected sounds from FALISTRI

video upload by Frap Tools

"Vowels, fake filter sweeps, and frequency divisions: FALISTRI’s capabilities as an oscillator are way beyond its compact design!"

How does BRENSO generate its wave forms and how to win an extra analog sawtooth!

video upload by Frap Tools

"Today we'll explore BRENSO's core, its generation circuits, and by the end we'll add an extra waveform to the stock ones!

00:00 The 'canonic' analog waveforms: triangle, sawtooth, square, sine.
01:04 How does an oscillator generate a wave?
01:56 BRENSO's triangle and square waves
02:26 BRENSO's sine wave
03:27 BRENSO's sawtooth
04:47 How to create a second sawtooth with BRENSO, FALISTRI, and the 321
07:36 Double-sawtooth eas-coast fun and closing remarks"

Wiggly LFOs on the BRENSO (credit: Make Noise)

video upload by Frap Tools

"When we saw this video on Make Noise's channel, we thought it was a great patch! [posted here]

So we wanted to recreate it on the BRENSO oscillator and use this technique in a different context. Basically, we're using an offset to throw the yellow oscillator at sub-audio rate and use the timbre modulation section to create some weird-shaped LFOs. We further expanded it through FUMANA, USTA, and FALISTRI.

Thanks again Walker and @MAKEN0ISEMUSIC for the inspiring patch!

00:00 Introduction
00:57 BRENSO yellow LFO
04:56 Adding a FUMANA Feedback
06:47 Clocking the USTA sequencer
10:00 Introducing a clock divider
12:20 Adding a second melody"

Frap Tools: Finally we ACTUALLY PLAYED a modular synth!

video upload by Frap Tools

"In today's study, ‪@francescogennarimusic‬ guides us through the construction of a fully-functional polyphonic modular synthesizer that can be played with a keyboard AND sequenced at the same time! Check out the video to see how he managed to get FIVE voices, one of which with the unique character of formant oscillators."

Time stamps:
00:00 Introduction
00:23 Modular performance
04:22 Track structure overview
04:49 4-Voice polyphonic synth routing
07:33 Usta sequencing and modulation
08:04 Formant oscillator with Falistri
10:27 Bass line
11:02 Effect section: Desmodus Versio as reverb
12:15 Effect section: FX AID XL as chorus

Original track 'Studio No.7' composed by @francescogennarimusic
Instagram: / fncgennari
Linktree: https://linktr.ee/francesco.gennari
Bandcamp: https://francescogennari.bandcamp.com...
Soundcloud: / user-351738626
‘Studi’ takes its cue from the tradition of the Étude, treating each track as a focused investigation into sound, structure, and technique.

Artwork by Daniel Hicks
Instagram: / mrmrsir
Website: https://danielhicksart.com/

On counterpoint, cross-FM, and analog+digital timbres | Studio no. 5 performance & patch breakdown

video upload by Frap Tools

Today Francesco explores one of the harshest timbres ever created by mankind: the cross-FM. And if that wasn't enough, he will use both digital AND analog FM at the same time, blending Brenso and Hertz Donut mk. 1. How can we tame such wild beasts? Through a careful composition in the spirit of the great counterpoint masters.

Original track 'Studio No.5' composed by ‪@francescogennarimusic‬"

Time stamps:
00:00 Introduction
00:22 Modular performance
03:14 On counterpoint
03:55 Track structure overview
04:24 First voice: Brenso + Doepfer LPG + QSC
05:39 Layering the first voice
07:16 Second voice: Hertz Donut MKI + Optomix + QSC
09:33 Third voice: Falistri + SEM VCF + QSC
10:24 Usta clocking Sapel, Bagai, and Empress Zoia Delay
10:52 Disting EX: Ping Pong Delay and Reverb
11:33 Desmodus Versio: Final Reverb
11:51 Mute Hack with Usta and 411 VCA

Flip Sync+tons of CV=groove!

video upload by Frap Tools

"In this patch, we set the green oscillator to Flip Sync, then we used the USTA sequencer to control the integration time, creating a varying glide effect. Then, we used FALISTRI to change its pitch as well, creating these snappy sync sweeps. Thanks to Oliver for suggesting this patch in our workshops!"