MATRIXSYNTH

Saturday, April 05, 2008

images via this auction
"Bob Moog had proved that pre-patched synths were a going commercial concern following the success of the MiniMoog (and, of course, its rival, the ARP Odyssey) but despite the relative affordability of these two instruments (around $1,500 compared with the $15,000 of their modular predecessors!), it was clear that there were still musicians gagging to get their hands on a synth but who simply couldn't afford one and so, in much the same way he stripped his modular synths down to the bare basics to make the Mini, Dr Moog stripped the Mini down to the bare basics to make the Micro.

Featuring just one oscillator, it was clear that you were faced with compromise but to counter this, the MicroMoog did offer various sub-octave footages to beef the sound up. However, these were phase-locked to the master oscillator and didn't offer the rich detune one might expect of a synth from the Moog stable. The filter was, of course, classic Moog and the envelopes were lifted directly from the Mini being of the ADS type with a switchable R stage that took its time from the setting of the Decay control. New to the Micro was a simple LFO for vibrato and filter modulation. Interestingly, the Micro also allowed cross modulation of the filter by the audio oscillator which offered some interesting possibilities. Unfortunately, as the oscillator was the only audio source, all it could do in most circumstances was to add a certain 'rasp' to the sound. However, when the filter was self-oscillating, some interesting pseudo ring modulation sounds could be created. The Micro was a departure from the Mini as well in that it employed a ribbon controller for pitchbend instead of the Mini's wheel (there was still a wheel for modulation though and this was quite versatile in what it could control)."

Friday, April 04, 2008

A Syntar Family Shot

The Syntar, SWAN and Mattson Mini Modular Pheonix Series. All three were designed by George Mattson.

The Syntar was the first keytar ever produced. It had a unique extended controller on the neck that essentially consisted of nine small wood blocks you could increasingly press for varying degrees of modulation. It's like having nine assignable pitch bends not limited to pitch.

The SWAN is the Syntar Without A Neck (the only one in existence).

The Pheonix is the new Mattson Mini Modular risen from the ashes of the Syntar.

If you've been following the site, you will know that the SWAN and a Syntar are up for auction on VEMIA. Click on the links for each to get to the posts.

If you have seen the posts already, check out the updates. Someone actually listed the SWAN on Ebay! It was of course a scam as the only one in existence is available on VEMIA. There was some heated discussion on AH.

Also, if you haven't already, be sure to check out the history of the Syntar on Carbon111. There are some fascinating bits concerning MOOG and NAMM. You can also find an interview and some history here. Finally you can click here for all posts featuring the Syntar. If you appreciate synths you will appreciate this unique, rare bit of synth history. It really is a fascinating story. A bit of MATRIXSYNTH trivia: I remember the first time I saw the SWAN. It was at George Mattson's place and Carbon111 was going to borrow it for bit. We drove it back to his place and when doing so, I thought how crazy it was that the only SWAN in existence was floating up the I-5 in the back of my CRX. It was a surreal moment for me. And yes, we took extremely good care of it. We all love synths.

MOOG Minimoog

images via this auction

Minimoog Ebay Auction
YouTube via asiaudiosales

Update: one more video
minmoog tune

Some Stuff from around 1984

flickr by Neil Vance

full size

MOOG CEMS unique original custom modular - VEMIA

"ONE OF THE TWO OR THREE MOST IMPORTANT MOOG CUSTOM MODULAR SYSTEMS IN THE WORLD. This is the system Joel Chadabe dreamt up, in collaboration with Robert Moog, and had him build in the late 60s. It is at VEMIA, undergoing restoration - more details later - but is a unique and hugely powerful system, full of Moog custom modules, some very rare, some very early, and some almost certainly unique. Joel Chadabe's book 'Electric Sound' pp286-287: 'In 1966, I got an idea. I drew up a plan for a completely automated synthesizer system, discussed its feasibility with Robert Moog, described it in an article in 'New Perspectives in Music', and got the funding to have it built. That system, which I called the CEMS (Coordinated Electronic Music Studio) System, was ordered from Moog in 1967.... and installed in December 1969. In addition to an extended array of sound-generating and processing modules, an automated matrix mixer, and a digital clock, the system contained a bank of eight analog sequencers with customised logic hardware for running them synchronously, asynchronously, in succession, or in any combination.' '... the world's largest concentration of Moog sequencers.......' 'In 'Drift'.. (1970), icy electronic sounds swooped automatically through a virtual space without my intervention or control. It was the realtime equivalent of algorithmic composition..' '... a few months later, I was using joysticks to control oscillators, filters, modulators and amplifiers. The sequencers, configured to generate pseudo-random patterns, were also controlling the oscillators, filters, modulators and amplifiers. And I was also controlling the sequencers...... .. I was in effect conversing with a musical instrument that seemed to have its own interesting personality.' The CEMS is housed in four tall vertical cabinets, on casters. 1. 4x 960 (s/n 1094-S, 1096-S, 1103-S etc) 4 x 962 (s/n 1062, 1063 etc) 4 x custom delay mixers, 20 trunk lines. All R.A.Moog, mostly 9/69. 2. 4x 901 VCOs, trunks, Portamento, 2x multiples, CP-3 mixer, 984 mixer, 901, Portamento, 911, 2x 902, multiples, Portamento, 901, 904B, 904C, 904A, 904B, pitch/trigger interface, 912, S-trig>V-trig with portamento, 902, 911, multiples, 911, Attenuators, 911, 903, multiples, 3-pin sockets for joysticks etc, Delays, trunk lines. 3. 'Moogus Operandi' 10 digital numeric switches, 104ms- 4 sec delays, with x1 and x100 switches, digital clock with nixie tubes, trunk section with type B sockets (one line empty), 3x 4U Voltage Controlled Mixers, Portamento (R A Moog, no logo), 905, Triggered Controller, R A Moog banana & 3-pin interfaces, 904B, 902, 902, 911, R A Moog Signal Router, Amplifier, 3x Triggered Controller, PSU, delays and trunk lines. 4. similar to cabinet 1. **It also includes five R A Moog joysticks, serial numbers 1002, 1003, 1004, 1005, and... 1008. - and a pre-production model Ribbon Controller, which Mike Bucki at Modusonics can provide a new ribbon for.** Like many other things in this auction, this is from the collection amassed by Felix Visser, former head of Synton. All items were destined for a national technology museum project, many years in the making, but finally cancelled by politicians and planners. They have mostly been stored unused for a number of years. This system has not (as of March 20) been powered up, and is SOLD AS IS unless we have more information in the meantime. (The power supplies are currently at Lucid Sound for testing and servicing where necessary.) Cosmetic state at present: all sequencer lamps present and guaranteed working 100%; all screws, nuts and washers checked, cleaned and replaced where necessary; veneer repaired on the facing edges of cabinets where necessary; casters replaced; module panels cleaned and looking good; many of the silver knob inserts are missing - many are saved ready to stick back on, but some are lost. (We are searching for replacements, or failing that, new knobs are still generally available.) The quality of early Moog modules is remarkable, and we would expect it to be not at all difficult or expensive to restore this to excellent working order - and beautiful cosmetic condition as well. If required, we can source and supervise this work, and would expect it to be very reasonably priced. All photos were taken before cosmetic restoration, and the system now looks a great deal better - superb apart from the missing silver knob inserts. For more of the old pics see: link"
You can find this one on VEMIA - Click on Auctions, Search, and search for 5560.

Update via peterwendt in the comments: "I knew I'd seen this before: link... great post with lots of details from Richard Lainhart."