Saturday, July 12, 2008
Frequency Dance No.5
YouTube via nero54ad
"This was shot while laying down the basic track for the latest in my Frequency Dance series."
Drum n bass with various gear
YouTube via filtersweeperVCO
"Just a bassline sequenced by the MPC 1000, triggering the Moog Voyager, and then running the signal through a Sherman Filterbank. The MPC has the drums running from the assignable outs on the back and into the Kaoss pad."
Synthesizers.com Q127 fixed filter bank demo
YouTube via birbabirbabirba
"Simple sequence filtered by a Synthesizers.com Q150 24db filter and the Synthesizers.com Q127 fixed filter bank (a modern reissue of the Moog 914 fixed filter bank)."
Techno Booyaaaa
YouTube via waveshaper. spot the modulars
"Techno Booyaaaa Techno Booyaaaa Techno Booyaaaa Techno Booyaaaa Techno Booyaaaa Techno BooyaaaaTechno Booyaaaa"
Update: you can find a link to the mp3 in the comments of this post.
Friday, July 11, 2008
Noisebug is OPEN!
The Noisebug.net website has also been updated. Check out the site for more info and images. You can find some additional images here.
New Firmware for Moog Source midi kit
via Scott Metzger on the AH list:
"This makes me very happy. Haven't had a chance to check it, but it supposely fixes the detune issue when spinning the input knob quickly. This is a huge deal!!!
Moog Source SMK MIDI Retrofit Version 4.10 This version of the SMK fixes a few bugs and incorporates a new installation procedure.
In previous revisions, if the Incremental Controller was turned too quickly, the sample and hold update code would fall behind and the voice would temporarily drift downward. This was due to a sharing of the Z80 interrupt line. Version 4.10 uses the NMI line for MIDI, and the INT line for the Incremental Controller, alleviating the problem.
Fixed a sysex load problem.
Fixed a minor bug with Level 2 – 5 waiting for the old PPQ parameter.
(Note: This firmware revision (and all following revisions) require a modification to the installation.)
http://www.encoreelectronics.com/sour410.zip"
"This makes me very happy. Haven't had a chance to check it, but it supposely fixes the detune issue when spinning the input knob quickly. This is a huge deal!!!
Moog Source SMK MIDI Retrofit Version 4.10 This version of the SMK fixes a few bugs and incorporates a new installation procedure.
In previous revisions, if the Incremental Controller was turned too quickly, the sample and hold update code would fall behind and the voice would temporarily drift downward. This was due to a sharing of the Z80 interrupt line. Version 4.10 uses the NMI line for MIDI, and the INT line for the Incremental Controller, alleviating the problem.
Fixed a sysex load problem.
Fixed a minor bug with Level 2 – 5 waiting for the old PPQ parameter.
(Note: This firmware revision (and all following revisions) require a modification to the installation.)
http://www.encoreelectronics.com/sour410.zip"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
