PPG WAVE 2.V

YouTube via whiteeagle1973made
"Here's a brief demonstration of some presets of the PPG Wave 2.v plug-in
Equipment used:
-Evolution mk-249c midi controller.
-TechSmith Camtasia.
-SAVIHost,Hermann Seib's standalone VST host application:
http://hermannseib.com/english/saviho...
-Pentium III PC. (not kiddin')"

BOEHM SOUNDLAB MODULAR CLIP 2

YouTube via whiteeagle1973made

"Dry sound effects and bleeps from the Soundlab and filming during a routine cleaning....and a little funky fun towards the end. This is not a "good condition - for sale" clip."

BOEHM SOUNDLAB MODULAR


previously posted

"A Looped patch, made in the Boehm Soundlab modular.
If you set the VCA gain at the maximum, the sound stays always on, no matter what the ADSR settings are. So this is useful for loops and complex effects.
This clip is somewhat dark, the sound is captured by the camera's mic, but you get an idea what this little beast is capable for."

Roland SH 101 classic analog monophonic synth

via this auction

"The ability to mix in the sub oscillator at 1 or 2 octaves below makes this a killer bass line maker. Add in the 100 note sequencer and arpeggiator and you can see why this has become a classic synthesizer. Runs on batteries or standard 9v adapter."

DAVE SMITH INSTRUMENTS EVOLVER KEYBOARD

via this auction

Moog Minitmoog Monophonic Synthesizer

via this auction

MAESTRO RARE SOVIET USSR DIGITAL SYNTHESIZER

via this auction
"Keyboard electronic musical instrument (KEMI) "Maestro" is a portable polyphonic four-voiced synthesizer with microprocessor control (KR-580) & pre-programmed timbres "presets". It has been assembled on FORMANTA factory, the one which made well-known POLIVOKS.

Number of presets- 20. There is possibility to get vibrato frequency with depth & frequency control. This instrument includes "chorus" effect with depth control, filter with cut-off frequency & resonance control. There are also "arpeggio-tremolo" arrangement with speed control and joystick that pitch shifts & vibrato depth controls.

Specifications:
— Number of octaves in a keyboard, 3
— Weight, 10 kg (approx. 22 Pounds)"

video previously posted here

Korg MS-20 - Demo 01

YouTube via uppuz
"No fx, no audio editing. Pure MS-20 raw sound.

Specifications:

Control Section
1. Keyboard C ~ C, 37 Keys / (3 octaves)
2. Voltage controlled oscillator 1
(VCO 1) Scale [32', 16', 8', 4'] / (6 octaves + 6 octaves (FM))
Wave form ( , PW ( ), white noise) / (4 modes) PW adjust
3. Voltage controlled oscillator 2
(VCO 2) Scale [16', 8', 4', 2'] / (6 octaves + 6 octaves (FM))
Wave form ( , , , Ring Modulator / (4 modes) Pitch/ (+- 1octave)
4. VCO master control Master tune/ (+-1/2octaves) Portamento Frequency Modulation intensity by MG/T.EXT Frequency Modulation intensity by EG1/EXT
5. VCO mixer VCO-1 level VCO-2 level
6. Voltage Controlled High Pass Filter Cutoff frequency Peak [flat ~ self-OSC] Cutoff Frequency Modulation intensity by MG/T.EXT Cutoff Frequency Modulation intensity by EG2/EXT
7. Voltage Controlled Low Pass Filter Cutoff frequency Peak [flat ~ self-OSC] Cutoff Frequency Modulation intensity by MG/T.EXT Cutoff Frequency Modulation intensity by EG2/EXT
8. Envelope generator 1 Delay time Attack time Release time
9. Envelope generator 2 Hold time Attack time Decay time Sustain level Release time
10. Modulation generator Wave form , Frequency
11. Manual controller Control wheel Momentary switch
12. P. switch & volume Volume
13. Indicator LED (trigger, MG rate)

External Signal Processor
1. Control section Input signal level Low cut frequency High cut frequency CV adjust Threshold level
2. Input & output Signal in (auto-pad system) Amplifier out / 0V ~ +8V Band pass filtered out CV out (F/V) / 0 ~ +8V ENV out / 0 ~ +5V
v Trig out /
3. Indicator (LED) Peak indicator Trigger indicator

Patch Panel Section
1. Keyboard Keyboard control voltage output (exponential) / 0 ~ +8V Keyboard trigger output /
2. VCO VCO 1 + VCO 2 control voltage input (linear response) / 0V ~ +8V VCO 2 control voltage input (linear response) / 0V ~ +8V VCO 1 + VCO 2 external frequency control input (OCT/V) / -3V ~ +3V
3. VCF External signal input / 3Vp-p External HP filter cutoff frequency control input (2OCT/V) / -5V ~ +5V External LP filter cutoff frequency control input (2OCT/V) / -5V ~ +5V
4. VCO + VCF Total external modulation input (T.EXT) / -5V ~ +5V
5. VCA Initial gain control input / 0V ~ +5V
6. EG EG 1 envelope signal normal output / -5V-0V EG 1 envelope signal reverse output / +5V-0V EG1 + EG2 trigger input / EG1 + trigger input / EG2 envelope signal reverse output /
7. MG Triangle output () / 5VPP Rectangle output () / 0 +5V
8. Noise generator White noise output / 5Vp-p Pink noise output / 5Vp-p
9. Sample and hold Clock trigger input / Sample signal input / 5Vp-p S/H output / 5Vp-p
10. Modulation VCA Control voltage input / 0 ~ +5V Signal input / -5V ~ +5V Signal output / -5V ~ +5V
11. Manual controller Control wheel output / -5V ~ 0V ~ +5V Momentary switch /
12. Signal out Signal output / 2Vp-p (output impedance 3.5kOhm)
13. Headphones Headphones out / (8 Ohm) 120mwatts

Power consumption 10 watts
Dimensions 569 (W) x 309 (D) x 249 (H) mm
Weight 7.7 kgs"

Nord Lead 3 - Demo 01

YouTube via uppuz
"No fx, no audio editing, no presets. Pure NL3 raw sound.

NL3 Specifications

POLYPHONY
•20 voices. 4 part multitimbral.
SPECIAL FEATURES
•Velocity Morphing: each function, controlled by a knob, can be controlled to respond to keyboard velocity. Wheel Morphing: each function, controlled by a knob, can also be controlled by the Modulation Wheel/Control Pedal to continuously fade between two sets of values.
Performance controllers
•4 octave velocity sensitive keyboard with octave shift buttons (+/-2 oct.)
•Keyboard Split, two sections.
•Modulation Wheel
•Pitch Stick (with no dead zone at zero crossing)
•1 pedal input for sustain
•1 for expression pedal. Patent pending for the Pitch Stick.
User interface
•3 digit display, 26 knobs and 27 buttons for program editing.
Oscillator section
•OSC 1 generating sine, triangle, sawtooth or pulse with adjustable width, waveforms. OSC 2 generating triangle, sawtooth or pulse (with adjustable width) waveforms and can also generate noise with a color control. OSC 2 can be hard-synched to OSC 1.
•Linear deep frequency modulation of osc 1 from osc 2. A wide range of new waveforms with a strong formant character is achieved with the new synchable noise, where noise can be synched to OSC 1.
Filter section
•12 dB (2-pole) low pass, 24 dB (4-pole) low pass, band pass or high pass and notch with 12dB low pass. Cut off, resonance, envelope amount, envelope amount controlled by velocity. ADSR envelope. Filter keyboard tracking can be set to full, half or off. Filter distortion.
Amplifier section
•ADSR envelope, gain control.
Modulation section
•LFO 1 generating triangle, saw, pulse, LF filtered noise and random staircase routed to OSC1+2, OSC 2, filter, pulse-width and FM amount.
•LFO 2 produces a triangle waveform, routed to OSC 1 and 2 or amplifier. It also controls the rate for the arpeggiator. Arpeggiator: Range: 1 - 4 octave. Modes: up, down, up/down, random. Hold function. Echo can be set between 1 to 8 repeats. Modulation envelope (attack, decay) for OSC 2 pitch, FM amount and pulse width.
Performance section
•Play mode: Poly, legato, mono, unison mono, unison poly. Manual mode. Four program slots for layering possibilities. Portamento/auto portamento.
Percussion kits
•10 analog drum kits. Each percussion kit consists of 8 independent sounds, configurated in 8 zones across the keyboard.
Memory
•Programs (single sounds): 297 (3 x 99) user, 693 (7 x 99) factory.
•Performances (multi sounds): 100 user, 300 (3 x 100) factory.
•Percussion kits (multi zone sounds): 30 (3 x 10) user, 70 (7 x 10) factory.
Audio Out
•4 outputs. Each slot has its own output. Modes: stereo, mono and multi-timbral mode. Headphones out. High resolution low noise 24 bit DACs.
MIDI features
•All control knobs and switches for program editing send and receive control change messages. System exclusive bulk dumps. One program or all programs. MIDI clock synchronizing LFO 1 and LFO 2/arpeggiator restart. Triggering of the filter and amplifier envelopes and velocity control from separate programmable MIDI channel and note numbers.
Connections
•4 Line Level Audio Outputs - ¼", 6,35 mm jacks, unbalanced
•Stereo Headphone Output - ¼", 6,35 mm stereo jack
•Sustain Pedal - ¼", 6,35 mm jack. Use a momentary pedal, like e.g, Roland DP-2, DP-6, Yamaha FC-4, FC-5, Fatar VFP1-25 etc.
•Control Pedal - ¼", 6,35 mm TRS stereo jack. Use a Roland EV-5 Control/Expression pedal
•MIDI in & out - 5 pin DIN connectors"

NAMM: WNAMM10: iSample iPhone App From Way Out Ware

via Sonic State http://www.wayoutware.com/index.php
Available on iTunes here

NAMM: WNAMM10: Doepfer DIY Synth And More

via Sonic State