Circuit Bending Casio MT-200

YouTube Uploaded by Tuesander on Nov 30, 2011

"My first Circuit Bending Project. I picked up a Casio MT-200 for 10 bucks in San Diego Thrift Store, took it home and started soldering.
Please excuse the low quality vid and sound - the recording is a spur-of-the-moment thang..."

Circuit Bent AKAI XE8 DRUM MODULE

via Circuitbenders
"The Akai XE8 is an excellent sounding rackmount midi drum module with a grand total of 16 onboard sounds, slots for 2 extra sound cards each featuring another 16 sounds, 8 individual outputs plus a mix out, some excellent percussion shaping parameters including a pitch envelope, and a baffling operating system thats almost impossible to use without a manual!..

As you can see, our main modification on this machine is the addition of a single unit rackmounted patchbay which is connected to the main unit via a 25 way D-sub cable. More details of our patchbay mods can be found HERE

The patchbay has a total of 22 sockets in the main patching area and also includes 2 X Patchable switches, 2 X 3 way Patching multiples and a patchable momentary pushbutton for quick drum fills and spot effects. These extra features offer huge range of extra percussion grinding possibilities.

There is also the addition of a pitch knob that controls all of the onboard sounds simultaneously. This can take the pitch of the sounds way beyond what is possible using the tuning parameters. At its lowest setting the sounds disintegrate into a wall of digital aliasing noise and are barely even recognisable as percussion samples..."

Circuit bent AKAI XE8 drum module by circuitbenders.co.uk

Akai S612 Midi Digital Sampler and Disk Drive

via this auction

ROLAND CR-8000 vintage drum machine MANUAL

via this auction

Click on the bottom pic to read the specs.

Minimoog V-TRIG to S-TRIG converter Cinch-Jones to Minijack

via this auction

"You are bidding on a cable that lets you connect the Minimoog's Cinch-Jones type trigger input to a more standard minijack used by several manufacturers. This reverses the trigger from the Minimoog's s-trig output to a more standard v-trig output. It was built by my tech Ramcur from quality parts and Canare cable."

BOSS RRV-10 vintage half-rack digital reverb

via this auction

YAMAHA E1010 vintage analog delay echo chorus flanger

via this auction

SN 9097

CLICK FOR MORE »

ROLAND TR-77 vintage analog drum machine

via this auction

"This is the professionnal tolexed version, less common than the standard wooden finish version. This machine has a nice warm sound, probably due to the transistor-less design!"

KORG VC-10 rare vintage ANALOG VOCODER

via this auction

SN 160915

Panote ANALOG SYNTHESIZER MODULAR SYNTH 9V

via this auction
panote09 (RSS)
Update: videos added below.
"This is the analog synth which runs on DC9V or DC12Vand supplies more than 150mA (negative center only such as BOSS PSA-120,240 or others.

VCO1------------------
(KNOBS)
FREQ.=frequency
(JACKS)
CV IN (oct/v can accept +-9V)

VCO2-------------------
(KNOBS)
FREQ.=frequency
(JACKS)
CV IN

VCF---------------------
(KNOBS)
RESON.=RESONANCE adds extra high freq. and oscillation.
FREQ=cut off frequency
(JACKS)
CV IN

MIXER-----------------------------------
VCO1=volume of VCO1
VCO2=volume of VCO2
EXT. IN 1= volume of EXT IN 1
(JACK)
EXT.IN 1
EXT IN.2 = input with the buffer to the MIXER

VCA----------------------
(KNOBS)
INI.GAIN=Gain control.EG level should be controlled with VCA ini.gain.
If you would like to get maximum EG effect,EG level should be maximum and VCA ini.gain should be minimum.
VOLUME
(JACKS)
CV IN
OUT

SAMPLE&HOLD-----------------------
(KNOBS)
LEVEL=OUT LEVEL
RATE
It supplies random voltages to drive VCO,VCF like S.F sounds.
(JACKS)
CV IN
OUT

NOISE GENERATOR--------------------------
(KNOBS)
LEVEL=noise level
(JACKS)
OUT

ENVELOPE GENERATOR----------------------------
(KNOBS)
LEVEL=OUT LEVEL
ATTACK
RELEASE
(SWITCH)
TRIGGER
The push switch supplies trigger signal to EG and ATTACK&RELEASE knobs process it to send it to VCA.
(JACKS)
GATE IN(V TRIGGER) can accept up to +9V
OUT

LFO--------------------------------
(KNOBS)
LEVEL=OUT LEVEL
WAVE=2 waveforms are mixed by this knob.
SPEED
(JACKS)
OUT

6 cables are included in this listing.
I make more cables if you need.(US$6/one)"

ANALOG SYNTHESIZER MODULAR SYNTH 9V

YouTube Uploaded by panote09 on Nov 30, 2011

ANALOG SYNTHESIZER MODULAR SYNTH 9V part.2

Uploaded by panote09 on Nov 30, 2011

ANALOG SYNTHESIZER MODULAR SYNTH 9V part.3

YouTube Uploaded by panote09 on Dec 2, 2011
panote09 on eBay (RSS)