Sunday, July 15, 2012
DIY Digital Synth Module - Cygnx Production Model
YouTube Published on Apr 24, 2012 by SynthStuff
http://www.spacehardware.co.uk/Products.html
Prototype videos below.
"Details
All aluminium contruction.
Front panel LED matrix Oscilloscope showing the pre-filter sound.
Two digital oscillators:
12 sweepable wavetables with smooth and stepped modes and sweep direction.
24 single cycle waveforms which can be mixed using Add, Xor, Split, Phase Distortion or FM.
And an additional PWM mode.
Waveshaping options - Layer, Sync, Fold, Shape, Phase Distortion 1, Phase Distortion 2, Phase Distortion 3
Two analogue filters -
Filter 1: 12dB/Oct LPF/BPF with overdrive
Filter 2: 24dB/Oct LPF/Notch with variable notch mode
Three LFOs and two analogue ADSRs
120 step programmable sequencer, records note value and velocity.
Midi In and Thru."
micromac-r 1 & strangelands
YouTube Published on Jul 15, 2012 by macbethsynthesizers
"Here is the first demonstration video of the MacBeth micromac -r 3U Eurorack module. This short video will give you some idea of the smooth sound of this synthesizer! There is some interesting lead and bass going on here...I'm using a Korg Prophecy as a keyboard controller and a Kenton Pro4 to drive the micromac!"
strangelands
Published on Jul 15, 2012 by macbethsynthesizers
"Here's an odd video that I've done featuring both the micromac-r and the micromac-d pre factory assembly models. Instead of doing the lead synth stuff that I usually do- I let the micromac-d sample and hold itself. It's gating itself too! The micromac -r sounds almost choir like with a lot of cross mod happening from oscillator 3. And then there's the crappo analogue radio happening in the background on poor reception shortwave!"
via Ken MacBeth on Facebook
"I fired up the micromac-r this morning! Always a scary one when one has built the thing totallky by hand. I works absolutely perfectly...straight off! This now means the micromac-r and micromac-d synthesizers can go off for assembly this week!"
MEM Preparing Second Run of PALette V2
via Magic Echo Music"Despite the delay in web updates, PALette V2s are complete and pre-ordered units have all shipped. Thanks for your patience and support!
As for the first run, there is still ONE unit uncalled for. If you would like this unit, now is your chance– get in touch.
We are currently on a summer vacation in Japan but will be back in Seattle full force in August to prepare for the second run and ship the remaining units ordered from the first run.
As for those who have ordered after July 2 from the first run, you will receive your V2 in August at your doorstep in time for your summer jamming needs.
Thanks for checking in!
Get more frequent updates from MEM and new photos up at our FB page."
Mono-Poly at Tripstream I ::: Fri 13 July 2012
Mono-Poly at Tripstream I ::: Fri 13 July 2012 from Grooveline on Vimeo.
Mono-Poly at Tripstream II ::: Fri 13 July 2012 from Grooveline on Vimeo.
Triphouse Rotterdam presents Tripstream with Mono-Poly
Broadcast by www.Grooveline.Org
the squarewave parade to auction teaspon v1 & POLLEN Production Rights
via the squarewave parade mailing list:"I am auctioning off the rights to manufacture the Teaspoon v1 and the POLLEN. if you are interested the auction will be held in the forum as usual. if you have any questions just ask
AUCTION - http://la-ac.com/msbd/viewforum.php?f=20
EMAIL - sustain AT thesquarewaveparade DOT com
Teaspoon v1 production rights
DETAILS : http://thesquarewaveparade.com/teaspoonv1PR.html
DEVICE : http://thesquarewaveparade.com/teaspoon.html
Pollen v1 production rights
DETAILS : http://thesquarewaveparade.com/pollenv1PR.html
DEVICE : http://thesquarewaveparade.com/thepollen.html"
Shruthi with Oliver Gillet & Frank Herrgott
YouTube Published on Apr 1, 2012 by fherrgott
"Demo from the Shruthi (Mutable Instruments). Shruthi designer : Olivier Gillet, musician and composer : Frank Herrgott. To know more about Mutable Instruments products please visit the page http://mutable-instruments.net/"
This one spotted and sent in via Hédi.
Synare 3 Clone For Sale
Note: Auction links are affiliate links for which the site may be compensated.
Synare 3 clone for sell (part one)
YouTube Published on Jul 13, 2012 by RuprechtM
via this auction - Part two video below.
"TURN ANNOTATIONS ON!
Synare 3 clone for sell.
Feel free ask for anything at nedele()seznam.cz
Sound is triggered by clicking to front panel or by external drum pad or external audio signal.
Anodized aluminium housing, CNC engraved labeling, darkened (stained) lacquered oak wood sides with wood natural pattern.
Built like a tank :)
Oscillator no.1 - tune + on/off/noise switch
Oscillator no.2 - tune + on/off/slow (can be used as LFO) switch
Filter section (24dB/oct VCF) with tune / modulation (by osc2) / sweep / resonance / decay. Filter is self-resonating at max setting (see part two).
Amplifier section with decay and volume knobs.
Input gain (sensitivity) knob and trigger input connector added against original Synare 3.
Built by me, based on the schematic from service manual with some changes (and improvements).
Clone tech info:
Battery saver circuit is omitted, powered by wall adaptor only, no batteries.
CA3080 OTAs used in orginal are replaced by newer LM13700 with same (or slightly better) performance.
Quality components are used, metalized resistors, polypropylen WIMA and tantal capacitors in signal path (elyts in power source of course), smooth potentiometers, rubbered (softened) buttons.
Great for sampling or live performance or you can use it with analog sequencer/synth
You can connect external drum pad into Trig In connector for live drumming.
Or connect individual output from your drum machine to Synare´s Trig in and "replace" internal sound by Synare´s pure analog sound.
Connectors jack 1/4" (6,3mm): Trig IN, OUT.
Powered by DC 12V wall adaptor (positive center) - protected from wrong polarity.
Dimensions cca 21x13x8cm (cca 8x5x3 inches)."
Synare 3 clone for sell (part two) - with self-resonating filter
via this auction
YouTube Published on Jul 13, 2012 by RuprechtM
via this auction - Part two video below.
"TURN ANNOTATIONS ON!
Synare 3 clone for sell.
Feel free ask for anything at nedele()seznam.cz
Sound is triggered by clicking to front panel or by external drum pad or external audio signal.
Anodized aluminium housing, CNC engraved labeling, darkened (stained) lacquered oak wood sides with wood natural pattern.
Built like a tank :)
Oscillator no.1 - tune + on/off/noise switch
Oscillator no.2 - tune + on/off/slow (can be used as LFO) switch
Filter section (24dB/oct VCF) with tune / modulation (by osc2) / sweep / resonance / decay. Filter is self-resonating at max setting (see part two).
Amplifier section with decay and volume knobs.
Input gain (sensitivity) knob and trigger input connector added against original Synare 3.
Built by me, based on the schematic from service manual with some changes (and improvements).
Clone tech info:
Battery saver circuit is omitted, powered by wall adaptor only, no batteries.
CA3080 OTAs used in orginal are replaced by newer LM13700 with same (or slightly better) performance.
Quality components are used, metalized resistors, polypropylen WIMA and tantal capacitors in signal path (elyts in power source of course), smooth potentiometers, rubbered (softened) buttons.
Great for sampling or live performance or you can use it with analog sequencer/synth
You can connect external drum pad into Trig In connector for live drumming.
Or connect individual output from your drum machine to Synare´s Trig in and "replace" internal sound by Synare´s pure analog sound.
Connectors jack 1/4" (6,3mm): Trig IN, OUT.
Powered by DC 12V wall adaptor (positive center) - protected from wrong polarity.
Dimensions cca 21x13x8cm (cca 8x5x3 inches)."
Synare 3 clone for sell (part two) - with self-resonating filter
via this auction
EMS Synthi A + DK1 Vintage Analog Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
yousenditworks (RSS)
"Here is the chance you've been waiting for! For sale is an incredible rare EMS Synthi A with DK1 keyboard, the classic vintage analog synth as used by Brian Eno, Pink Floyd and many more. This Synthi is in great cosmetic condition and fully functional. A few scruffs/sticker residue on the outside case, but the inside looks near mint and very clean. Serviced 5 years ago by the original manufacturers in the UK and barely used since. It's been very well taken care of. Includes the DK1 cricklewood keyboard which adds a whole range of possibilities and control. Also comes with the lid and complete with all the pins plus 9 extra pins, keyboard and power cable. Runs off 220-240v but step up transformer is included to use in 110v countries. Sounds incredible, I have owned many vintage synths and this one is the coolest and most unique. Amazing EMS sound you need to hear to believe, can get very raw, and with the patchpin interface it gets you to come up with sounds you'd never get otherwise. See pictures below for more details. Payment must be made by bank transfer, no paypal. Payment must be made within 24 hours. Can also potentially deliver in person to anywhere in the bay area, LA or San Diego. Don't miss out on this one in a lifetime chance to own a rare classic!"
via this auction
yousenditworks (RSS)
"Here is the chance you've been waiting for! For sale is an incredible rare EMS Synthi A with DK1 keyboard, the classic vintage analog synth as used by Brian Eno, Pink Floyd and many more. This Synthi is in great cosmetic condition and fully functional. A few scruffs/sticker residue on the outside case, but the inside looks near mint and very clean. Serviced 5 years ago by the original manufacturers in the UK and barely used since. It's been very well taken care of. Includes the DK1 cricklewood keyboard which adds a whole range of possibilities and control. Also comes with the lid and complete with all the pins plus 9 extra pins, keyboard and power cable. Runs off 220-240v but step up transformer is included to use in 110v countries. Sounds incredible, I have owned many vintage synths and this one is the coolest and most unique. Amazing EMS sound you need to hear to believe, can get very raw, and with the patchpin interface it gets you to come up with sounds you'd never get otherwise. See pictures below for more details. Payment must be made by bank transfer, no paypal. Payment must be made within 24 hours. Can also potentially deliver in person to anywhere in the bay area, LA or San Diego. Don't miss out on this one in a lifetime chance to own a rare classic!"
Roland SH-7 Vintage Duophonic Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"It was just fully serviced at one of the best synth shops in the nation called 'Switched On' in Austin, TX."
Some pics of the inside below. Additional pics at the auction while up.
via this auction
"It was just fully serviced at one of the best synth shops in the nation called 'Switched On' in Austin, TX."
Some pics of the inside below. Additional pics at the auction while up.
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
