MATRIXSYNTH

Elektron Analog Four - House sounds of Chicago

Published on Dec 13, 2012 by darenager

"I was messing around with the A4 and stumbled across the arpeggio sound from Frankie Knuckles seminal 1987 track 'Your Love' so here it is, I did not spend a great deal of time getting the other sounds correct, and this is just a basic demo, the original track can be found on youtube, if you are not familiar with it do check it out, it is one of my favourite classic house cuts."

Elektron on eBay

Roland System 100 Quad 2

2nd video added to this post. Don't miss it, it's a good one.

Buchla 207e - Mixer / Mic Preamplifier

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The top section is the same as the mixer model 206e, but the bottom section (formerly a preset manager) has been replaced by a microphone preamplifier.

The top consists of a six input, two output mixer with controls for level and stereo location. Two of the locations can be voltage controlled; the remaining four can be continuously panned. VU meters monitor the output levels.

The preamplifier accommodates a wide range of input levels and provides phantom power to those mikes that need it. LED’s indicate the output level and an envelope follower output is provided.

The microphone gain and the headset level are not stored as part of a preset. All other settings can be stored with the aid of a 206e or a 225e preset manager."

CLICK FOR MORE »

Synthetic Music Systems Dual VCO Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Up for sale is a SMS Dual VCO Module.
Only 1 of 10 Lovingly built.

2 x 1V/OCT VCO's in a single 19" Rack Space.

Condition wise I would give it 95%

100% Functional and nicely in tune.

Here is a quick run down of it's features.

Two independent temperature compensated Voltage Controlled Oscillators as follows.
Excellent tracking and stability.
Each VCO has a dedicated sync In and Out socket (the out can be used as an additional Square output)
Completely compatible with all synthesisers using the 1V/OCT industry standard.
Dedicated 1V/OCT input Socket.
Modulation input with Bi-Polar attenuator.
Three way Octave select -2 Standard and Wide (approx 1HZ to 16K) on single turn.
Tune knob +/- 1 OCT.
Waveform morphing from Sawtooth (+10V) to 2% inverted Pulse wave.
Voltage Control of Wave Morphing input with Bi-Polar attenuator.
Built in PSU so need need for external PSU or room taken up in your Euro Rack.
PSU 230 and 110 switchable.

Please note this is for a single 19" Dual VCO Module Not the complete system shown in photo's..."

CLICK FOR MORE »