Buchla Format 203 Cabinet Clone

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.

"Direct clone of 70s vintage Buchla 203 cabinet
30U
has +15/-15/+12/+5 power rails
can hold 200 or 200e modules, presets will work"

Simmons SDS-1000 Vintage Analog Electronic Drum Synth SN 01197

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.

CLICK FOR MORE »

Access Microwave Programmer for Waldorf Microwave

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.

Waldorf Microwave Rev. A OS 2.00 8 Voice Wavetable Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction - learn how to sell on eBay here.


"2 x Wavetable Oscillators thru 1 x analog voltage controlled filter and 1 x voltage controlled amplifier per voice(8 voices total.)"

CLICK FOR MORE »

Getting the Prophet 12 ready for a gig this weekend

Published on Aug 21, 2013 hyperdust7·36 videos

"Going to Greenbelt this weekend - Christian UK Music Festival. I haven't got a slot to play but I'm hoping to get on the Roots Stage which is an open mic. I've spent the day programming my new synth putting together a set of patches and am pretty pleased so far."

Pretty good Dr. Who Tardis sound at 2:55.

Dave Smith Prophet 12s on eBay

Case Study # 1.1 Aphex Twin - Heliosphan

Published on Aug 21, 2013 Gtechture·40 videos

"Here is an attempt to recreate Heliosphan by Aphex Twin. There was little desire to match the sound of the original since given the limitations of live performance and the use of completley different tools. All of the sequencing was done one the Yamaha RS-7000. Version 1.1 utilized the Radikal Technologies Accelerator for Pad sounds the Moog Voyager for the arpeggiated sound and the JoMoX Xbase 999 for drums."

Trigger Riot and Tiptop drums do da 4 x 4 tight beat

Published on Aug 21, 2013 GM1ify·38 videos

"Some use of Time shift to delay the snare hits and OH by a bit gives some extra feel of tightness to the beat"

http://tiptopaudio.com

Old Crow's Oberheim OB-X Clone Project

via oldcrow on Muff's

First post with initial diagram above: "Ever since playing MC's OB-X at AHMW, I got it into my head to try and make one--gotta be cheaper than ebay! This meant making my own voice cards, first in the original form factor to test first on a "host board" to power and provide pots and switches for the voice board under test, then later in an actual OB-X. Since the vintage cards used CEM3310s and discrete everything else, I made the EGs in non-custom form using JH's VC_HADSR as a design reference (it was inspired by the 3310). It works on a breadboard, so they're in the CAD schematic and the "hard" part of the layout is done: the VCOs. I squashed the circuits a bit in order to open up some room on the board as my EGs were going to be a tad larger than a single 16-pin chip; they each use 4 chips, 4 transistors and a handful of passives. Throughhole parts as my eyes have gotten too bad to hand solder SMT very well (but I have a full SMT factory line for that if I ever make more than 8 of these ;)

The CA3080s are replaced by 13700s, which are dual 3080s. I do not bother with the darlington buffers. The CA3086 transistor array is replaced by two LS318s, and those mount over SMT TC resistors (see A3A, A3B in image). I do use some SMT bypass caps as the original board features no bypass caps whatsoever, save for the DC filter caps on the local voltage regulators."

Follow-up with the pics below: "Slowly the master vision takes shape: here is a nearly-finished host board with a fully-populated carrier board mounted to it, and the carrier board loaded with a slot adapter and attached crowbx voice board."

For those not familiar with Old Crow, you can find his site here. He has been most often referred to here on MATRIXSYNTH for his KORG Polysix battery fix.

CLICK FOR MORE »

Torino Synth Meeting - Kinetik Laboratories

Published on Aug 21, 2013 noisecollectivenet·13 videos

"Torino Synth Meeting - In occasione della terza edizione, abbiamo avuto il piacere di ospitare Andrea Reali e Claudio Granzieri di Kinetik Laboratories, produzione noise made in Torino!"

via Andrea Reali on The MATRIXSYNTH Lounge
http://tsm.noisecollective.net/index.php/edizioni/item/tsm-terza-edizione-kinetik-laboratories-video

3x3 Matrix Mixer and HNG
Published on Aug 21, 2013

"Action sounding on a Kinetik Laboratories 3x3 matrix mixer and HNG."

Torino Synth Meeting - Lep Loop

Published on Aug 21, 2013 noisecollectivenet·13 videos

"Torino Synth Meeting - In occasione della terza edizione, abbiamo avuto il piacere di ospitare Antonio Cavadini di LEPLOOP! Enjoy!"