MATRIXSYNTH


Monday, November 25, 2013

Linn LINNDRUM vintage 1982 drum machine w/ JL Cooper Midi


Published on Nov 25, 2013 sequentialx·4 videos
Playlist:
Linndrum Original patterns (11 to 57) + 2
Linndrum with JL Cooper MIDI demo (eBay auction)
Linndrum setup and button test for eBay auction


via this auction

"The machine was recently restored by a professional technician at Ramcur. Every capacitor was replaced with the highest quality available, the circuits were cleaned and some other internal parts were replaced, including the batteries. The machine has a nice powerful sound and no hiss or hum! The case still hums a little, like all Linns, but it's been reduced to a minimum.

I've installed the original patterns back into the machine and wrote a few of my own while testing the unit. Note that you'll need to back up your pattern data when not using the machine regularly, the batteries need a regular charge to hold patterns.

The machine has all the original EPROM sounds Linn Electronics installed circa 1982. it also includes 7 extra EPROMs to change the snare, bass drum and toms sounds to other standard issue Linn sounds.

ZIF sockets are installed in the bass drum and snare sound sockets.

The original "Pre-sets" tape is also included. I uploaded presets via a computer/mp3, the tape looks unused.

It's interesting to note that this unit is serial number 0015, likely making it the 15th made.

The JL Cooper kit plaque in included. It was left uninstalled, it's included and could be added on with double-sided tape.

The Linndrum comes with a nice sturdy road case that was custom made for it. This case explains in parts why this unit was kept in outstanding condition.

To sum it up : It's nicely restored, works perfectly, looks mint and sounds nice and punchy, I honestly think this is the best Linndrum out there!

Go see the 3 videos below for an in-depth demo of the unit.

The auction includes the following items :
Linndrum drum machine
IEC power cable
original owner's manual
Midi kit manual (repro)
custom roadcase
7 extra EPROMs
2 ZIF sockets (installed)
Linndrum CPU (pre-MIDI kit)
original Presets tape."

Vintage 1969 EKO Tiger keyboard/piano/synthesizer

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"This is a truly vintage Eko Tiger manual combo organ/keyboard. This instrument was made in 1969 (dated inside of the cabinet) and is a fully functional keyboard with all features working. It contains two internal speakers, but they are just for quick monitoring - the keyboard fully blossom when connected to a serious amp and your imagination is the limit when it is run via modern effects, pedals and the means of sound enhancement, like Leslie speakers.

The features are controlled by six colored Hammond drowbar alike switches - they are only on/off switches for the 'mellow, reed, brass, flute, bass chorus & vibrato' functions. The bass volume and tone controls add color and depth to all the functions.

The keyboard/synth is easy to carry with a convenient handle - it weights 36 lb.

The keyboard is in excellent visual condition with no signs of use, it is very clean inside and outside - it looks like it was not used and stored for many years.

It comes with a keyboard cover and AC cord.

Size: 34-3/4"W x 19"D x 7"H. Shipping weight ca. 40 lb."

【DEMO】Oberheim OB-8

Published on Nov 25, 2013 musictrackjp·209 videos

"What kind of music gear do you have?
" musictrack gear " is now ready to open !!
http://gear.musictrack.jp/

DEMO by Katsunori UJIIE.
Facebook: Like me please!
https://www.facebook.com/musictrack.jp"

New Critter and Guitari Melody Mill Eurorack Module


"The Critter & Guitari Melody Mill is a note generation module for Eurorack modular synthesizers. It contains a keyboard, CV outputs, CV clock input, built-in arpeggiators, a sequencer, and MIDI capabilities. The Melody Mill brings the fun of the Pocket Piano to modular setups! With the Melody Mill you can:

Use the CV output to control oscillators
Connect your MIDI controller or computer into your modular setup using the MIDI input
Play notes, record and playback sequences and arpeggios on your favorite modules
Convert MIDI clock into CV pulses
Clock the arpeggiator with an LFO for strange melodies
'Hold' notes for drones
Connect the built-in square wave oscillator directly to a filter or an amp
The Melody Mill generates 1-Volt per octave, trigger, and gate control voltages. These signals are used to trigger other synthesizer modules. Notes may be played on the built-in keyboard or received via MIDI. The notes may be used directly to generate the CV signals, or fed through one of the five arpeggiator modes first. Adding to the fun is a hold button and a simple sequencer to record and playback notes. In addition to the CV outputs, the Melody Mill also outputs MIDI of the note it is generating.

A ‘smart’ arpeggiator clock selects a clock source depending on what is connected to the Melody Mill: CV clock input, MIDI clock, or internal clock (controlled by the 'Rate' knob).

The six modes are:

Single Shot
Up Arpeggio
Down Arpeggio
Pyramid Arpeggio
Alternator Arpeggio
Random Arpeggio
Melody Mill Manual PDF - English

Dimensions: 7.56“ x 5.03” x 0.9”

Shipping Weight: 1.5 lbs."

via Critter and Guitari

Waldorf Rack Attack Rackmount Percussion Synth SN P 1220220000987

Note: links to listings are affiliate links for which the site may be compensated.


via this auction

Access Virus Classic Rackmount Virtual Analog Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Access Virus TI Snow Desktop Virtual Analog Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Novation Nova Desktop Virtual Analog Synth

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

Roland VP-9000 Variphrase Processor SN ZN31481

Note: links to listings are affiliate links for which the site may be compensated.

via this auction


- OS 1.05 / 8MB RAM / ZIP250 DRIVE / INCLUDES ORIGINAL MANUAL

Jurgen Haible 'Polymoog Resonator'

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Brand new. Highest quality parts available - no compromises. Artfully hand wired in the 5U MOTM / Moog format.

You are bidding on a 'Polymoog Resonator Clone' Synthesizer Module in MOTM Format. The module was designed by Jurgen Haible and assembled by Free State FX. The 'Polymoog Resonator Clone' is a faithful recreation of the resonator circuit found the the Moog Polymoog Synthesizer. User selectable Highpass, Lowpass, Bandpass, and Band Notch filtering on three seperate tunable frequencies (Low, Mid, High).

Originally built for the Free State FX demo modular, we have decided to let these go. They are the only two modules we have on hand. We will be unable to assemble any more Jurgen Haible designed 'Polymoog Resonator Clone' modules in the future.

Alco Knobs
Switchcraft Jacks
24 ga Mil Spec Wire used for Input/Output
Polyester Film Capacitors
Metal Film Resistors
Double Plated PCB with Soldermask
MOTM Power Connector
Runs on +/- 15 Volts"

PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH