MATRIXSYNTH

YAMAHA CS-80 for Sale

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Single owner CS-80 that has just been serviced by a cs-80 specialist.The power supply and tsb1 and 2 (touch sensor buffer)boards are new rebuilds. These are high-level restoration kits offering continued reliable operation.The unit was tuned to yamaha specifications as well and needs a good while to warm up before it's in tune. -comes with original stand,pedals,casters and carrying case - all of which go into a massive anvil case in very good condition with new foam. This synth was used by owner mostly between 1979 and 1982 and has spent many years in it's case. The keyboard plays great and the ribbon controller appears unused and functions properly..."

CLICK FOR MORE »

YAMAHA CS60 For Sale

Note: links to listings are affiliate links for which the site may be compensated.
Published on May 2, 2014 MarkJenkinsMusic·34 videos

via this auction

"A very rare opportunity to own a fully working Yamaha CS60. More portable than the CS80 and more expressive than the CS50, the CS60 is the ideal way to get those amazing Blade Runner/Chariots of Fire sounds which Vangelis created on the CS80. Other CS80 fans include Eddie Jobson who created fantastic layered textures and leads for "UK" and other bands, and Klaus Schulze.

The CS60 is eight-note polyphonic, fully analogue with variable resonance filters and has a velocity and aftertouch sensitive keyboard. Aftertouch can bring in vibrato, tremolo and filter opening just like on the CS80. Also as on the CS80, the CS60 has a fantastic voltage controlled ring modulator which creates huge clanging bell-like and metallic sounds - these are all over the 'Blade Runner' soundtrack and the music of Klaus Schulze - and a pitch strip which bends notes down to the sub-audio region..."

Oberheim Matrix 12 SN P52809

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

KURZWEIL K2500RS with Original Box & Manuals

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"This is the factory "S" version (not upgraded after the fact), with full sampling capabilities, and loaded with almost every major option that was available (minus the KDFX).

P-Ram
Piano board
Contemporary board
Orchestral board

It also has a hard drive built in (540mb, which was typical at the time). Only 8mb sample ram currently installed, but it's a negligible cost to max these out."

CLICK FOR MORE »

Atomosynth KOE Desktop v2.0 Mini Eurorack Modular System

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"KOE Desktop Mini Modular v2.0 Analog Synthesizer "Toxic Green Edition"
based on the Koe synth voice module and Ki midi to CV module (eurorack standard), front panel is made of laser cut fluorescent green acrylic, housed in a compact shiny clear acrylic case (laser cut), and includes power supply, three patch cables and audio cable. Dimensions: 252mm(W), 145mm(D), 93mm(H. incuded rubber feet and knobs)

Specifications

KOE synth voice eurorack module

36 HP width, needs +/- 12V power. Two VCO with square and ramp wavefoms with depth and tune controls, each tune control is a ten turn potentiometer which allows you easily set octave, tune and fine tune with just one knob. Oscillator section has two CV inputs: VCO1+2 which affects both oscillators and VCO2 which affects oscillator 2 only. When a plug is connected to VCO2 input the VCO1+2 input affects to oscillator 1 only. Noise source with level knob and on/off switcher, it also features a noise output jack. One LFO with square and triangle waveforms, it has a switcher for setting it to affect the VCO frequency or the Filter cut off, it also features a cv input to affect the LFO depth and an output jack. High pass and Low pass vactrol based filter with cutoff and resonance/peak control, it also features an input jack to control the cut off frequency. Two Envelope generators: EG1 with decay control which and depth control, it is set to affect the cut off frequency of the filter and also features an output jack. EG2 with attack and release controls, set to affect the volume, it has an output jack and input jack for the incoming gate signal. Also it features an audio input, it allows process any axternal audio signal with the filter and envelopes. The faceplate is made with 3mm dark grey laser cut acrylic, the knobs are black aluminum..."