New Analog Bytes tbDSP Eurorack Module with Knob Touch Detection

"tbDSP is a modular synth that’s currently under development. It will be available in 2014. Here is a picture of the current prototype (remember, the front panel aesthetics and screen graphics aren’t finalized yet)"

"With tbDSP we set out to create not only the most powerful DSP synthesizer platform in Euro, but also a platform that could evolve over time. At the heart of this goal is the ability to add functionality and make improvements once the module has been released into the wild. To support this, we put a USB port on the module and developed PC and Mac applications so that when a new idea pops into our heads, we can share it with everyone that owns the module. Likewise, it will allow users to influence development.

HP: 26
Engine Control Knobs
Coarse/Fine Toggle Button for Engine Control Knobs
LCD (2.4” diagonal, 320x240)
Selection Knob
Selection Enter Button
USB Port
Navigation Buttons
Navigation Shift Button
Inputs (+/-10 V, Audio or CV)
Outputs (+/- 5 V, Audio or CV)
Engine Buttons

tbDSP features three chips that share the processing duties:

Altera FPGA - graphics, SD, and audio processing
Analog Devices SHARC - floating point audio processing, FFTs
Microchip PIC32 - USB, Firmware Update, and housekeeping

The FPGA processes audio at sampling rates as fast as 98MHz, and the SHARC can compute over 24,000 1024-point FFTs per second."

You can find additional details and follow progress at http://tbdsp.tumblr.com. The following are a couple of videos and audio demos.

"My appreciation of the old Atari POKEY sound chip compelled me to recreate its guts in a tbDSP engine. Some might argue that doing so is a waste of perfectly good DSP, but I saw an opportunity to make an engine with features that I wish the original chip included. The new engine is called POKE. I want to cover two of the new features here."


Published on May 18, 2014 tb DSP·1 video

tbDSP Spectrogram Example



"POKE engine modulating LPF CV alone, then processing rate CV alone, then both simultaneously"

Chvrches: NPR Music Tiny Desk Concert

Published on May 12, 2014 NPR Music ·549 videos

Update: make that ALTO, not LTO. Only one previous post on MATRIXSYNTH. Synths include the DSI Tempest, Mopho x4, and Teenage Engineering OP-1.

Update 2 via Chris Haynes in the comments: "That ALTO is controlling a Moog Minitaur for the bass drones."

"For a brief moment, I imagined hearing Chvrches perform "Recover" or "Gun" with a couple of acoustic guitars and perhaps a shaker or two. And, though these songs would surely stand up well when broken down and bared, I'm thrilled that Chvrches came with a small arsenal of synthesizers to perform a few highlights from last year's album The Bones of What You Believe.

Seeing these now-familiar earworms executed up close was nearly as much a campfire moment as an acoustic set might have been, except the flames burned brighter. Lauren Mayberry's voice felt powerful and vulnerable, while Iain Cook and Martin Doherty kept those memorable synth lines bubbling underneath. The result works as a perfect introduction to the Glasgow trio, but also a reaffirmation of talent and longevity for those already love with the band. --BOB BOILEN

Set List

"Recover"
"Gun"
"The Mother We Share"

Credits

Producers: Bob Boilen, Denise DeBelius; Audio Engineer: Kevin Wait; Videographers: Denise DeBelius, Olivia Merrion, Stephen Thompson; photo by Meredith Rizzo/NPR"

MFJØRG - the Mini Moog Experiments - full album ( rare danish synthesizer sounds )

Published on Apr 22, 2014 LFORSK·176 videos

"This album was all made on a vintage mini moog synthesizer
recorded & played in skov studio by mfjørg 2011.
the album contains 11 parts of pure mini-moog sounds.
and was only out in few copies."

Finishing the SH-2000

Published on May 19, 2014 organfairy·422 videos

"A couple of videos ago I got the defective Roland SH-2000 back to working order - not that it was very difficult. But I still need to finish the cabinet. There is a missing top part and I make a new one in this video.

The music is something I made back in the analogue days. It is 'Little Lady' that was a hit for Scottish singer Aneka in the early 1980's. I play it on Yamaha and Technics organs as well as the other SH-2000 that I bought in 1994."

Modular vid #167

Published on May 19, 2014 Phisynth·132 videos

"One take jam on the Serge and Bugbrand Modulars.
DRM's going through BB frequency shifter, and Serge voice trough Serge frequency shifter. Heavy use of the Serge Res EQ."

Devil Fish-Controls the Modular

Published on May 19, 2014 TB-303 Devil Fish·19 videos

"A live jam of a track called 'Sparrows HEAD' by Random Knobhead.
MIDI, AUDIO, CV signal routing-
To start in some sort of logical order, I will begin with the master tempo and transport commander:-
Yamaha RS7000 is sending MIDI (100bpm) to the Roland TB-303 Devil Fish and the Elecktron Analog four. The RS7000 has percussive parts playing from internal synth voices and is not sending out note data.
The Analog four is sending clock pulses to the Roland SH-101 and the TipTop Trigger Riot modules Ext Clock Ins, The A4 is playing a panning percussive pseudo random sound, and has the SH-101 running through its Reverb unit, it is also sending a gate pulse on the first of a 64 step pattern to the Trigger Riots Reset in.
The SH-101 is playing an internal sequence.
The Trigger Riot is sending (the A4s) Clock out to the Make Noise Woggle Bug and Echophon modules, along with Clock Divisions to the TipTop BD808 module, and Clock Division Pulses to the Echophons Freeze in, and to the Devil Fishes 2 Dynamic Bank Switching inputs alternating it between 4 or 8 internal patterns depending on if 1 or 2 patterns were selected.
The Devil Fish is sending CV to the Make Noise DPO modules second oscillator (the first is an FM source for the second which is also being FMed by the Make Noise Woggle bug modules 'smooth' random out), the Devil Fish is sending gate out to the 4MS Pingable Envelope Generator which is opening the Make Noise QMMG (DPOs channel after its filtered through the Intelligel Korgasmatron module), the Devil Fish is also sending its Accent out to the TipTop Hats808 modules Open Hat. Devil Fishes Audio out is through the Boss SD-2 distortion pedal(not used) and through the A4(with no effect).
The iPhone is not synced but still set to 100bpm it has the NodeBeat app playing a simple melody into the Echophon which has the Pitch knob modulated by the Random out of the Woggle Bug.
All Audio from the modules is routed to the QMMG then to the mixer.
The Korg Kaoss Pad 2 is a send effect for the mixer and is used to 'Stutter' the RS7000 and Modular together and separately.
I think thats all..."

Analog Ordnance - PE Machine Eurorack Module

Published on May 19, 2014 blaman2012·37 videos

Note this is the first Analog Ordnance post. There was one previous post featuring blaman2012 here.

"PE Machine demo

The PE Machine is a synthesizer capable of heavy grating, hissing and rhythmic power electronics / harsh noise sound, Three tunable oscillators, manual voltage control and slip (slide) control
Each of the oscillators has a different configuration - LFO - MFO - HFO (Low-Mid-High-Freq oscillators)
It has CV input for hooking up to sequencers etc"

Synthesizers.com Modular Adventure

Published on Jun 14, 2013 wogsalg mit·7 videos

"What can we do with a Dotcom Studio-66 and an armful of patch cords?

(Just the synth in real time - one take, no overdubs, no other gear used and no EQ or effects.)"

Synthesizers.com Live Performance

Published on Nov 7, 2012 Manuel Schulz·1 video

"This is my Synthesizers.com Studio System 110 played live. There is no playback; just one delay on the first of the two output channels."

Analogue/Lofi Techno Jam - Eurorack, Mode Machines SID, Vermona DRM

Published on Mar 15, 2014 Mono Jono·2 videos

"A recording of some Jammin'

On Lead:
Intellijel Dixie
Bubblesound VCOb (into VCF sub osc input).
Blue Lantern Asteroid VCF
Rohren (tube) VCA (for distortion)
ADDAC sys 101
Mode Machines SID

On Bass:
Intellijel Dixie
Dinsync.info VCF 303 (with overdrive cranked up)
Asteroid VCA stage

On Drums:
Vermona DRM

Arranged by: Analogue Solutions Oberkorn sequencer

Synth mixed by:
Pittsburgh M3

A couple of short techno tunes.
All sounds from the Asteroid VCF (Dixie, VCOb and ADDAC 101) are fed through a Rohren (tube VCA).
The VCF 303 is fed a squeare from the Dixie and is run through the VCA on the Asteroid VCF. A CV channel from the Oberkorn is fed to the VCF 303s CV in, which causes the filter to fully open up (if you were wondering why it disappears into a tweeting budgie!
The above are sequenced by the Oberkorn.
The Sid is used for a couple of glitchy 8 bit sounds.

Really this is just part of a jam and is not a professional job."