Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"four inputs can be routed with individual buttons to four outputs. those routing settings are stored in an array of matrices that can be sequenced or controlled with cv. preset routing, feedback loops, chop sequences, trigger blasts (with expander), four-bit-wavetable-synthesis, and dramatic controllable mayhem are all possible.
features:
four input four output routing
inputs mix to outputs
16 matrices per bank
20vpp headroom
signal strength and polarity leds
comparator input and outputs
simultaneous cv and gate control
four banks with separate settings
randomizing functions
cv controlable top matrix
can slave to midi control change
26khz maximum switch frequency
8 bit dac voltage output
skiffable pcb design
16 hp
+80ma/-32ma current consumption
Sunday, June 01, 2014
ARP SOLUS Vintage Analog Synthesizer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
via the seller: "Ready to work, gig, and create with... Rare, fat clean sound, ring mod and some awesome filters... Sounds like and looks like an ARP Odyssey, (minus the sample/hold functions, noise and AR envelope generator.) Ring Modulator and two lovely oscillators. In it's own road case. CV, Gate, and Trigger in and out jacks, Ext audio in for control of guitar or other signals by the Solus filterbank. 37 perfectly functioning and tracking keys. Appears to be brand new.
Guaranteed to be playable and usable as a musical instrument upon delivery. Calibrated and adjusted by Ed Miller (5/22/14), LA - Area synth wizard."
via this auction

Guaranteed to be playable and usable as a musical instrument upon delivery. Calibrated and adjusted by Ed Miller (5/22/14), LA - Area synth wizard."
Crumar Spirit Vintage Analog Synthesizer SN N2 00047
Oxford OSCar Vintage Analog Synthesizer
Moog Micromoog Analog Synthesizer Model 2090
Roland Juno-106 Vintage Analog Synthesizer Fully Serviced w/SynthSpa Restoration & Wood Sides
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Synthspa completed the following work on the synth:
1. PANEL BOARD REBUILD:
All faders rebuilt, all non-functioning buttons replaced.
2. MODULE BOARD REBUILD:
All six 80017a voice chips restored and guaranteed working, calibrated to factory standards, and small defects within the module board repaired.
3. POWER BOARD REBUILD:
Large electrolytic capacitors replaced and power jack converted to the standard 3 prong computer cable receptacle. Includes new 3-prong power cable.
4. CPU BOARD REBUILD:
A new battery and mounting chassis (originally they were soldered in) and all of your sounds archived.
5. KEYBED CONTACTS CLEANED
6. BENDER BOARD REBUILD:
Clean volume & portamento knobs, switch, sliders, and bender contacts.
In addition to this, Sythspa installed custom Cherry-Wood sides on the 106, which gives it an amazing vintage look somewhat similar to the Juno-60. I also had the lighted mod wheel installed by SynthSpa.
There is some cosmetic wear on the synth, as evidenced in the photos. Most wear is in the form of minor scratches, with the possibility of some tiny dents that are not noticeable to me. Note the rust spots between the LFO and DCO sections, as well as near the CHORUS section."
via this auction

1. PANEL BOARD REBUILD:
All faders rebuilt, all non-functioning buttons replaced.
2. MODULE BOARD REBUILD:
All six 80017a voice chips restored and guaranteed working, calibrated to factory standards, and small defects within the module board repaired.
3. POWER BOARD REBUILD:
Large electrolytic capacitors replaced and power jack converted to the standard 3 prong computer cable receptacle. Includes new 3-prong power cable.
4. CPU BOARD REBUILD:
A new battery and mounting chassis (originally they were soldered in) and all of your sounds archived.
5. KEYBED CONTACTS CLEANED
6. BENDER BOARD REBUILD:
Clean volume & portamento knobs, switch, sliders, and bender contacts.
In addition to this, Sythspa installed custom Cherry-Wood sides on the 106, which gives it an amazing vintage look somewhat similar to the Juno-60. I also had the lighted mod wheel installed by SynthSpa.
There is some cosmetic wear on the synth, as evidenced in the photos. Most wear is in the form of minor scratches, with the possibility of some tiny dents that are not noticeable to me. Note the rust spots between the LFO and DCO sections, as well as near the CHORUS section."
Premier Enregistrement Modulaire
"First tryout with Intellijel Shapeshifter, Serge VCS & MakeNoise Optomix"
MHz for Friz, Germana, Kolar and Farrow
MHz for Friz, Germana, Kolar and Farrow from Peter Speer on Vimeo.
"FM radio, processed by a Make Noise Echophon, controlled by Max/MSP via an Expert Sleepers ES-3. The NanoKontrol buttons select presets in Max which control parameters on the Echophon.
Anna Friz: http://nicelittlestatic.com/
Stephen Germana: http://www.stephengermana.com/
Jeff Kolar: http://jeffkolar.us/
Jonny Farrow: http://www.jonnyfarrow.net/
NRRF: https://soundcloud.com/nrrf-radio
www.diode-ring.com"
Fallen into Sound with my Prophet 12
Published on Jun 1, 2014 DJRexParis·55 videos
"Fallen into Sound with my Prophet 12 together with some Stompboxes."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH