Tuesday, June 24, 2014
Night and wuthering (Doepfer analog modular synthesizer)
Published on Jun 24, 2014 GruithuisenCityMan·515 videos
Super high pitch comes it at :36. Be sure to turn it down.
"Night and wuthering (Doepfer analog modular synthesizer)
Hello ! My name is Frederic Gerchambeau. I have made this movie and this music. The music has been made using a Doepfer analog modular synthesizer.
Enjoy !"
Swiss Synthorama Synth Museum Featured in Swiss TV
I've actually been to Synthorama. Click here for all of my posts covering my visit. The curator Martin Hollinger is also into skateboarding. Note those posts went up long before I widened the site so you'll want to click on the smaller pics for the full size shots.
Googlish translation for the video:
"Synthesizer: The miracle of sound from the analog world
No instrument has contemporary music strongly characterized as synthesizer. Especially the first analog "sound machines" offered endless possibilities to make any sound at their own discretion. Today, the mass-produced works already digital, but the analog synthesizers have among musicians still cult status - also because of her fat, slightly dirty sound."
via sequencer.de
COA#9 Analog Drum Voice Panel
Published on Jun 24, 2014 Dmitri SFC·135 videos
"All Sounds from COA #9 Drum Voice Panel. LXR provides 7 Triggers NO Audio."
Dante Gonzales - Atomosynth Multiklon Demo Part. 1
Published on Jun 24, 2014 Dante Gonzales·6 videos
"Demostración del secuenciador analógico de 8 pasos variables Atomosynth Multiklon, controlando por Control Volt un Roland SH-2 y sincronizado por Trigger desde una caja de ritmos Boss DR-110. Acordes adicionales, ARP OMNI ll."
AniModule SOB Eurorack Synthesizer Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Resonant SVF with WaveFolder and Vactrol CV Input
A State Variable Filter with an adjustable WaveFolder
Self-Oscillating Filter Tracks 1V/Oct
Vactrol Input allows you to control CutOff via gates/triggers without using up an EG
Pot to mix "Clean" and "Folded" signal levels
Filter and/or Fold Audio as well as Control Voltages
2 Input Signal mixer
1 Input Control Voltage Mixer
1 Input to Vactrol for CV Modulation
1 1V/Oct input"
via this auction
"Resonant SVF with WaveFolder and Vactrol CV InputA State Variable Filter with an adjustable WaveFolder
Self-Oscillating Filter Tracks 1V/Oct
Vactrol Input allows you to control CutOff via gates/triggers without using up an EG
Pot to mix "Clean" and "Folded" signal levels
Filter and/or Fold Audio as well as Control Voltages
2 Input Signal mixer
1 Input Control Voltage Mixer
1 Input to Vactrol for CV Modulation
1 1V/Oct input"
AniModule V9A Eurorack Synthesizer Module
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"VC Sequencer / Waveshaper / Complex Envelope
Here's a powerful animal to add to your sequencing arsenal.
Send your CV to the CV In. As the Voltage increases the sequence steps forward. As the voltage decreases the sequence steps back.
Scale and adjust your input voltage to taste with the Onboard Attenuator and Offset.
Control the Output CV with an individual Potentiometer for each step.
When a step changes, a 10MS trigger is sent to it's corresponding switch. If the latching switch is depressed it allows the trigger to pass to the Trigger Out.
There is a switch per step for slew (portamento/slide) and a Potentiometer to control the Slew Amount.
There is also an input to allow gated control of when the slew turns on and off which will work in conjunction with the switches.
This module is looking for 0V to +5V (although all inputs are diode clamped to protect from standard synth range voltages). The Offset is 0V to +5V.
To allow for chaining of the V9a and rests, 0V will put you under the sequencer range and +5V will put you over the sequencer range. When the sequence drops below step 1 or over step 9, 0V will be sent to the CV Out and No Trigger will be sent to the Trig Out. When step 1 or 9 is activated a trigger will be sent to the Trig buss."
via this auction
"VC Sequencer / Waveshaper / Complex EnvelopeHere's a powerful animal to add to your sequencing arsenal.
Send your CV to the CV In. As the Voltage increases the sequence steps forward. As the voltage decreases the sequence steps back.
Scale and adjust your input voltage to taste with the Onboard Attenuator and Offset.
Control the Output CV with an individual Potentiometer for each step.
When a step changes, a 10MS trigger is sent to it's corresponding switch. If the latching switch is depressed it allows the trigger to pass to the Trigger Out.
There is a switch per step for slew (portamento/slide) and a Potentiometer to control the Slew Amount.
There is also an input to allow gated control of when the slew turns on and off which will work in conjunction with the switches.
This module is looking for 0V to +5V (although all inputs are diode clamped to protect from standard synth range voltages). The Offset is 0V to +5V.
To allow for chaining of the V9a and rests, 0V will put you under the sequencer range and +5V will put you over the sequencer range. When the sequence drops below step 1 or over step 9, 0V will be sent to the CV Out and No Trigger will be sent to the Trig Out. When step 1 or 9 is activated a trigger will be sent to the Trig buss."
Limited Edition BLACK MOOG MINIMOOG VOYAGER XL with 40th Anniversary Logo
Moog Minimoog Voyager Lunar Whitewash Select Series Analog Synthesizer
MOOG The Source Synthesizer SN 2808
Oberheim OB-X Synth SN 800814
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Pics of the inside below.
"It was working a few months back just fine and the lights on the board do light up as seen in the pictures. It is a stock 8 voice factory board without any midi kits added to it. I listed it as non-working because it seems to be locked up with no sound from the outputs. I would recommend having it cleaned and bench tested to see what the issue is. It has been an amazing keyboard to work with and deserves to be restored back to new condition"
via this auction
Pics of the inside below.
"It was working a few months back just fine and the lights on the board do light up as seen in the pictures. It is a stock 8 voice factory board without any midi kits added to it. I listed it as non-working because it seems to be locked up with no sound from the outputs. I would recommend having it cleaned and bench tested to see what the issue is. It has been an amazing keyboard to work with and deserves to be restored back to new condition"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
