MATRIXSYNTH

Roland Jupiter 6 Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

Shades of Detroit by a guy called Gerald

Published on Oct 8, 2014 A GUY CALLED GERALD

"To reinvent Melody would be impossible
So this is Melo G"

"Sorry this music has no guide rails for the new be dancer but if you let go you might find you can fly to ;)"

Roland Airas on eBay

deux rene

Published on Oct 8, 2014 SunFallsMusic

"1st lil session with both Makenoise Rene's in effect.
Rene-right - cv out to rene left xCV in.
Rene-left x gate out to rene right yclock in.
Having to break out the Rene manual to lock in the mad science on the logic functions to get the most out of cross modulation."

QU-BIT NEBULAE // the modular SAMPLER // miniature 1 // plays Bach

Published on Oct 8, 2014 LESINDES

"miniatures present
QU-Bit EUro Rack module Nebulae. Sample playback machine"

Qu Bit Electronix RT-60 Modulation Example

Published on Oct 8, 2014 Analogue Zone Showroom / Hangszer

"A basic demonstration of the voltage controlled DSP effects of the Qu-Bit Electronix RT-60.

In this patch, the melody sequence comes from the Make Noise STO controlled by the Modcan Touch Sequencer, then it goes to the Make Noise MMG which is "striked" by the Modcan Touch Sequencer's Gate output.

The RT-60's DSP effects are modulated from 2 sources:
The Soundmachines LS1 Lightstrip and the Make Noise Maths' envelopes. (As Maths' left envelope ends it triggers its right envelope). The parameters modulated by the LS1 are the 'Mix' and the 'Amount' which produces different results with different effects. The parameters modulated by Maths' envelopes are 'Verb Time' and 'Rate'."

Modcan Touch Sequencer - 4 Row Example

Published on Oct 7, 2014 Analogue Zone Showroom / Hangszer

"Patch Description: A basic demonstration of using all 4 rows of the Modcan Touch sequencer. All 4 rows have different roles in the patch. Row 1 sends a CV to the Make Noise STO's 1V/octave input (quantized CV values set internally on the Touch Sequencer - scale: penta-minor), thus creating a melody, while Row 2 sends CV to its Shape input. Row 3 sends CV to the Make Noise MMG's cutoff CV input. Finally, Row 4 sends modulation to the Qu-Bit Electronix RT-60 reverb time parameter."

TAMA TECHSTAR TS204 SN 200819

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"· The Synth voice has nine knobs that give you total control over a variety of parameters you can set to create anything from a booming bass to piercing high bleeps and beeps

· The Hand Clap is an awesome electronic clap like the Roland/Boss machines are known for, and can be manipulated with a few knobs as well
· The voices are triggered by either plugging an electronic drum pad into a “trigger” jack for either voice on the back of the unit; or, by plugging any drum machine, synth, noise maker’s output to the input jack for each voice
· Two rack-spaces tall
· Totally analog electronic pathway and REALLY fun to play wit"

CLICK FOR MORE »

Subatomic Modded Roland MC-202

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The mods are:

1a,2a.) Proper CV / GATE INPUTS
1b,2b.) Proper CV / GATE INPUTS (using Switch Sockets)
3.) VCF Cutoff cv (input)
4.) PW cv
5.) VCA (limited Volume Control)
6.) MOD
7.) PORTAMENTO CV SWITCH INPUT ( +5V will turn Portamento OFF. 0V will turn it ON. )
8a.) ACCENT (VCA) CV SWITCH INPUT ( +5V will turn ACCENT ON. 0V will turn it OFF. )
8b.) ACCENT (VCF) CV SWITCH INPUT
8c.) Selector for Accent -> VCF/VCA (toggle switch)
9.) Ext Audio Input to VCF Source Mixer
10.) Ext Audio Input to VCA

More information on the modifications can be found here and here"

CLICK FOR MORE »