MATRIXSYNTH

Wednesday, February 04, 2015

NAMM 2015: Radikal Technologies RT451

Published on Feb 4, 2015 sonicstate

"NAMM 2015: Radikal Technologies RT451 New dual multi-mode filter"

Radikal Technologies Multimode Dualfilter RT 451 DanceElectro

"This little track demonstrates some of the sonic possibilties of the new Radikal Technologies RT451 Multimode Filter. I created some drum sounds with the RT451 and some modules of my doepfer modular system. I imported the samples into the Spectralis and created a couple of grooves. Then I programmed the step sequencer and triggered the Doepfer again but this time with two oscillators fed into the RT451.

Modules/Equipment in use:
Radikal RT451 Dual Multimode Filter
Spectralis 2 Drumgrid and Step Sequencer

Doepfer Modules:
2x A-140 Envelopes
1x A-138 Mixer
1x A-132-3 Dual VCA
2x A-110-2 VCO
1x A-118 Noise
1x A-147 VCLFO
1x A-180-1 Multiples
1x A-181 Multiples"

Patch Talk: Santa Fe 2015

Published on Feb 3, 2015 suitandtieguy's channel

"I'm working on a track with my friend Ron Sunsinger at his house in Santa Fe NM and I thought I'd run through what we have patched up for all the knob knerds out there."

Tuesday, February 03, 2015

Sonic Potions Penrose Quantizer Demo

Published on Feb 3, 2015 littlem4tt
Re-Published on Feb 4, 2015

"Here is a quick demo of the fabulous Penrose Quantizer from Sonic Potions.
CV is fed from the Dinsync Modseq. Replicator CV buffer distributes the clocks and resets. Hearn Morley HMVCO1a into HM2040 filter into Manhattan Audio VCA.

https://www.sonic-potions.com/penrose
http://reallyniceaudio.com/?page_id=211"

Make Noise Rene - Eurorack Module SN 1412

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

""cartesian sequencer," "geometric sequencer," "planular sequencer," "axis sequencer," and finally, in buchla-speak, "non-linear sequential tuned voltage map." "rené," for the man rené descartes. the primary goal of this sequencer is to have a maximum amount of artist controlled musical variation, with a minimum amount of data input. there are no menus, all editing is done real-time, and thus, the programming of rené becomes a key performance element.

rené has up to 4 clock inputs and 2 cv inputs which may be used simultaneously to achieve complex, musical patterns output in the form of quantized voltages, non-quantized voltages and two gate/ pulse streams.

the faceplate for the rené is a printed circuit board. it is black, with white and gold graphics"

CLICK FOR MORE »

Cwejman BLD Bass Lead Kick Drum Eurorack Synthesizer Module

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"The BLD has all components and functions necessary for generating bass lead and drum sounds with focus on bass drum sounds. It can be trigged by a push button or by an external signal (any shape). The pitch, cutoff frequency, transient times and amplitude are also voltage controllable by external signals. The BLD contain main sound generator (OSCILLATOR) and noise generator and modifiers such as low pass filter, amplifier and two transient (contour) generators."

CLICK FOR MORE »

FOLKTEK TIME MACHINE

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"Only 15 of these have ever been made. A small number of these remain and there are no plans to make more.

This time machine created by Arius Blaze is a small series of identical works featuring patchable keys via magnetic patchbay (folktek original).

Capable of everything the other time machines are but quite a bit more refined and with added connection possibilities so for the time being, sounds and videos will reference older models. More will be added when possible. For more reference, read up on the other models on the time portion of the site

The Time Machine is an "on the fly" remix machine. 8 patchable keys determine timing change ups and odd granular effects/ring modulation of either a sampled sound (from extremely tight to up to about 5-8 seconds (becoming more lofi after a few seconds) or a direct incoming signal. Time is selectable between 3 ranges to allow for more range on the timing knob.

After a sample is captured, bits and pieces of the incoming signal can be added to or replace parts of the original. With the "add" jack, external CV can add/replace sound to/from the loop.

As a delay it's exceptionally Dub heavy with feedback ranging from singular to swelling, infinite repeat..

This is a digital piece with a very warm sound and very analog characteristics. A sample can be slowed to grumbles or sped up a great deal. The patches are magnetic - a thing we at folktek came up with so there is no need for plugging - you simply set your patch plug on whatever point you like. Patches are assigned to each key and pressing more than one key at a time creates a matrix affect allowing for more complicated effects and resampling. With the use of a magnet, a key can be depressed to act as a switch. The result is high and simple playability with thousands of possibilities.

Connections on the back allow the time machine to act as a master clock - with three 1/8" clock outputs and a tap tempo out. Using the tap tempo out and connection to a midi footswitch controller makes for an easy and inexpensive method of using the time machine as the master clock over midi as well.

CV input controls global pitch so among other possibilities, you can capture tight samples as synthesis from any source and play them with a sequencer or keyboard.

Custom Oak box, custom switches and keys and custom patchbays with cloth covered cables. The time machine has controls for mix, feedback, time one and two, level controls, sample on, delay on, 1/4" input, 1/4" output, and runs on a standard 9v-12v power supply.

I can only provide US and EU power supplies (EU only provided upon request), but if that doesn't suit you, one will be very easy to find. 9v +tip, 2.1mm, 1000ma. A simple voltage converter will work as well."