Thursday, February 26, 2015
ADDAC806 Bluetooth Audio
Published on Feb 26, 2015 ADDAC System
"This small module will allow you to send wireless audio signals from any bluetooth compatible device straight to your modular.
Features:
. Pre-amps for synth level signal
. 2 VCA's, one for each of the stereo signal. Both with CV attenuator knobs.
. 2 Leds to monitor signal level
. 2 Leds to monitor Bluetooth status
Until further notice these modules will be made by request and will only be available to order directly through us.
Webpage:
http://addacsystem.com/product/addac8..."
Korg emx - live jam techno
Published on Feb 26, 2015 Memores
A KORG electribe EMX with monocle, top hat and battery cigar held by its plug. Life is now complete.
PhonoPaper: playing the cat
Published on Feb 25, 2015 Alexander Zolotov
http://warmplace.ru/soft/phonopaper
iTunes: PhonoPaper - Alexander Zolotov
tomnakamshow #02 [KORG volca sample ACID test]
Published on Feb 25, 2015 tomohiro nakamura
"How to use volca sample as acid groovebox.
volca sampleにはレゾナントフィルターが付いていませんが、
長めのシンセ波形をレゾナンス量違いで複数ロードしておくと、
スタートポイントとサンプルナンバーのリアルタイム切り替えによって
アシッドライクなミニマルフレーズを組むことができるのではないかと思い、試してみました。
終盤はループレングスとピッチをつまみで好き勝手いじって遊んでます(これもvolca sampleの特徴的なサウンドの一つです)。
サンプリング元のシンセサイザーはDave Smith Instruments TETRA、ドラムはClavia nord drum2のものです。
volcaへのサンプル流し込みにはCaustic Editor for Volca Sampleを使用しました。"
Korg Volcas on eBay
Quasimidi Quasar Demo "Fat World"
"This was the final track I produced for the Quasar synthesizer. The track is contained as a bonus track on the Raven demo cd."
Tiptop Audio Station 252 Dancefair Jams
Published on Feb 26, 2015 ZV_K
http://www.tiptopaudio.com/
Playlist:
hardcore at dancefair, utrecht 2015
Kyteman at Dancefair 2015 Utrecht prt 1
Kyteman at Dancefair 2015 Utrecht prt 2
zv_k dancefair jams 1 - 6
Wednesday, February 25, 2015
Mutable Instruments Streams LPG, Tiptop Z-DSP delay eurorack
Published on Feb 25, 2015 bigcitymusic
"The left and right channels of Streams are set to Plucked Vactrol mode (fed by the left and right channels of Elements). Streams is output into the Tiptop Z-DSP Dragonfly Stereo Delay. Each gate of the MIDI sequence is striking the EXCITE input of Streams."
http://bigcitymusic.com/
Fables in February: Korg EMX electribe psychill demo
Published on Feb 25, 2015 MIDERA
"Another solo journey with the Korg EMX. All FX used were internal
coming from the EMX.
Shot using a Canon 60D with a 50mm lens at f/1.8."
Electribes on eBay
MFOS Synthesizer + Sequencer in Custom Portable Wood Case with Handle
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"This is a synthesizer/sequencer combo. The top portion is the MFOS Sound-Lab Ultimate and the bottom is the MFOS 16-Step Quantized Vari-Clock Sequencer. The build uses all PCBs and parts sold from musicfromouterspace.com. The additional parts (eg switches, pots, knobs, etc) are all from Mouser --no cheap Tayda stuff. The front panels are hand-made, printed PVC cemented to aluminum, and the back panels are milled by Front Panel Express. The 'legs' fold so that the piece can lay flat for storage or transport. The synthesizer's aux panel is wired for MIDI, but not MIDI-ready. It was wired for the miniCV which is an excellent MIDI->CV converter found by google searching "miniCV.". I haven't purchased/installed the miniCV, but will do if you ship it to me after the sale (its 28.00 Euro at last check), or you can install it yourself --only requires 7 solder connections.
I've built dozens of MFOS synthesizers and they've all been pre-sold and custom made. I designed this one to my own tastes and built it on spec. I finished it in December of 2014 and was just sure that I could get $2500 out of it --ha. I'm really anxious to sell this in order to fund my next project and only hope to get the same $ that I put into it --$1200. I really feel like this is a great deal and would love for this thing to go to a good home and be used to make great music; it really does sound great."
via this auction

I've built dozens of MFOS synthesizers and they've all been pre-sold and custom made. I designed this one to my own tastes and built it on spec. I finished it in December of 2014 and was just sure that I could get $2500 out of it --ha. I'm really anxious to sell this in order to fund my next project and only hope to get the same $ that I put into it --$1200. I really feel like this is a great deal and would love for this thing to go to a good home and be used to make great music; it really does sound great."
Roland SH-5 SN 480752
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH