TLC No Scrubs - Live Electronic Cover / Remix

Published on Aug 5, 2018 LOOK MUM NO COMPUTER

"#TLC No Scrubs Live #Cover / #Remix

You can download The audio on my patreon! But also...
I multitrack recorded this live session. I will be sharing the stems for this in a week. So you can have a look and see what was going on, what bits were going where and what not. All thats over on my patreon so go check that here :-
Patreon :- https://www.patreon.com/lookmumnocomputer

This was a tough one to get down. Singing and concentrating on wires aaaaaaajkfosdglgfdhhhhhhh ... But a little insight into this :-

Sequenced by two Arturia Beatstep pro's The first beatstep was controlling the two synth lines that were running, which i programmed in at the start on the keyboard. It also controls all the drums, running between two different beats. one for verse (4 to da flooowr) and a breakdown beat for the chorus's, basically just breaking up the kick drum pattern. The second Beatstep in this one was only controlling the JUNO (BUT HOW DO YOU SEQUENCE A POLYPHONIC INSTRUMENT WITH A BEATSTEP PRO??) easy.... the drum channel. assign all of the drum pads to different keys, that way you can play in a polyphonic synth line.
- The first synth line was a single oscillator, running into a moog style ladder filter, with not much attack on its envelope so it sounded like a slow clumsy man being followed by a trombone. In the cover i was adjusting the octave at some points but not much.

- The big bassline which comes in in the chorus is 2 synths. The main part is a triple oscillator going into a ms20 style filter, then into 2 sets of distortion, the second one (a SAFETY VALVE TUBE) has a switch which enables it which boosts the volume, this switch also engages the second bass synth which is a further 3 oscillators and a very low sub oscillator to turn on. These go into a juno style chorus widener and all that stuff. (this switch also fires out a 5v signal to turn up the VCA on the snare spring reverb, and the decay on the high hats) *talk about modular presets hey*

-The juno has 2 midi cables connecting it to the beatstep pro above, so it can send midi and receive midi.

-sadly after however many takes i did of this cover at some point kosmo's face turned off and i didnt realise DOH :(.

-My vocals are running into a roland vocal processor, so i can turn on a pitched down vocal, to add more dynamics, its also going into some saturation and some delay which i turn on and off at points.

-The ms10 is just going through a handful of pedals to make it sound a bit more gnarly, which is tough to saturate a single oscillator synth, so i send it through smallr room reverb first, then into a pitch downing cheapo chinese pedal, then into some distortion then into more reverb. the first instance of reverb gives the distortion something to bite on, instead of just boosting the signal of just a single wave, which aint too fun at all!

I literally listenned to the song a couple of times then just took the essence and forgot most of it haha. hence it ain't really a cover but more a live remix or summit? aaaah who knows!!

Also! the kick trigger is also sent to an envelope generator, which sends out an inverted output to open VCA's on the bass channels, hence you get that snazzy sidechain Ducking **quack quack*"

Moog Grandmother High Pass Filter Tones

New video added to this post.

Matrixbrute: Analog Stereo Delay & Harmonic Series LFO Waveshaping

Published on Aug 4, 2018 Kris Lennox

"Try with headphones/read below for more details RE the patch. This one took quite a while to make. Despite the actual matrix itself looking like not much has been altered, what has been altered has been altered specifically i.e. to exact numeric values.

Delay should be obvious to the ear. When I'm off to the far right, this is me playing with the delay settings. I'm not actually doing too much with the delay, just playing with the depth.

LFO 1 is sitting on a square wave - hence you'll hear the jumps in pitch. Of course, sine etc would create the distinct 'sweep' - but I was looking for something different, and with pitch specificity rather than range sweeping.

LFO 2 is altering between triangle and sine waves. When on sine, the harmonic series can be heard. I programmed the series to run between the major 3rd (i.e. E if on C), and the upper 9th (i.e. D on C).

Playing with the phase of LFO 1 determines the harmonic content. I'm beginning with a hard phase inversion. At about 0:17 the low octave can be heard entering. At about 0:40 the perfect 5th enters. At about 1:37 I'm changing LFO 2 waveform to sine - at which point the entire harmonic series can be heard.

In terms of tuning, VCO 2 has a focus on the sub-osc - plus the LFO is pre-programmed to drop it the octave - hence it sounds far deeper.

VCO 3 is set to the major 3rd (i.e. E on C).

I'm doing almost nothing on the keys aside from changing the octave of C. Function here is to illustrate the programming rather than focusing on playing.

PS I'm sure most MB owners already know this, but holding in PANEL and pushing the PRESET button initialises the preset, then you can build from scratch.

All best
Kris"

Elektron Analog Four | DEMO

Published on Aug 4, 2018 MIDERA

"I'm still waffling between keeping the A4 or getting an Analog Keys (AK). They're both good... I have no way to decide. I end up writing different things with both, each time preferring one over the other."

Roland CSQ-100 quick test

Published on Aug 4, 2018 SynthMania

"Please avoid comments saying that I need to use an SH-2, RE-501 and SB1000. I know. I don't have those at this moment. This is just a quick test to check THE CSQ-100 functionality on both channels."

ENSONIQ SQ80 Cross Wave Synthesizer OS 1.8

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

CLICK FOR MORE »

Novation Circuit - Playing with Wavetables and External Effects

Published on Aug 4, 2018 100 Things I Do

"A simple pattern of notes and effects. This one is more an experiment than anything else. I wanted to use some very etherial effects chains then slowly add them over time! I have been playing with the Wavetable engine in the Circuit and you can get some very interesting sounds. There is no 'wave run' like in the PPG or Blofeld but the interpolation on the waves is very nice and feature most wavetable synths miss."

Moog Grandmother +Benjolin Drone Ambient

New demo added to the playlist here.

Plane-V

Published on Aug 4, 2018 stretta

"The 2018 version of the plane sequencer expands to full piano roll-style editing. Import a MIDI clip from Ableton Live and edit on the monome. In this video you see two varibright monome 256 grids and one monome arc controller.

Plane-V is a maxforlive device and can be downloaded at https://github.com/stretta/gridlab

more information about monome can be found at monome.org"

Krazy Klee

Published on Aug 4, 2018 Scott Stites

"I ran across this video while going through an old computer. It's from May 2009, and shows my KS-01 in its early prime. It shows off the Triple Wilson SVVCF module, and, of course the Klee. I suppose I never uploaded it because it pretty much has one set sequence. Enjoy. Or not."

Update:

Klee and Appendage Wankenstein

Published on Aug 4, 2018 Scott Stites

"I ran across the video for this, but it still had the mic audio. I found the wav file recorded on my Korg D8 and synced it up for better audio, but the video reeeealllly suffered (my original video SW has gone away). Anyway, I kind of like this piece, so I thought I would post it. Klee and Appendage and my home brew modular all going at it..."