Friday, January 15, 2021
Arturia Microfreak x Noise Engineering
Noise Engineering
"Arturia makes a very cool little keyboard called the MicroFreak. As of today, you can get three Noise Engineering oscillators for it! They are available as a free download for your MicroFreak here: https://www.arturia.com/products/hard...
What do they do, though? Learn more at our blog post: https://www.noiseengineering.us/blog/..."
alien lick
zack dagoba
"Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100 Buchla 100!"
Uglysound Noise Demo: NLC GENiE
Uglysound
"Matt tests out his newly-built NLC GENiE with a noise demo.
From the NLC site: "GEneralized Nonlinear Extrapolator This module is made of 3 neuron circuits and a difference rectifier. (... )Just like a set of synaptically connected neurons, this module is noisy and unruly. It is never going to learn anything it lives in and for the moment."
More information about this design (as well as PCBs, panels, and complete modules) is available from Nonlinearcircuits here:https://www.nonlinearcircuits.com/mod...
PCBs, panels, and complete kits are available from synthCube here: https://synthcube.com/cart/nlc1080-ge...
As always, thank you for supporting independent artists and businesses. They make the world a far more interesting place!"
Threetom Modular 1 year anniversary PCB party pack + Wiretaps back in stock Inbox
via Threetom Modular
"Threetom’s 1 year anniversary is coming up. Time for a PCB party! Get all my PCBs at a special price for a limited time. Go check it out in my shop"
And:
"Wiretaps are now back in stock! Rev up your jump drive and jump to the Threetom shop…
Mr. Worf, Warp 9 to the Threetom shop!"
Crumar Bit99 w TAUNTEK Upgrade SN 00819
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Crumar Bit99
With TAUNTEK mod installed (it enables CC midi)
Serviced recently
in PERFECT conditions
100% working"
via this auction
"Crumar Bit99
With TAUNTEK mod installed (it enables CC midi)
Serviced recently
in PERFECT conditions
100% working"
Roland SVP-355 and Roland SIP-301
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Roland SVP-355 Pitch to Voltage analog synthesizer
Fully functional but some rust on the bottom panel. Some little caps are missing but replacement can be purchased.
Unit is 220v
Roland SIP-301 Bass guitar preamp.
Unit is very good condition and fully functional.
Unit is 220v"
via this auction
"Roland SVP-355 Pitch to Voltage analog synthesizer
Fully functional but some rust on the bottom panel. Some little caps are missing but replacement can be purchased.
Unit is 220v
Roland SIP-301 Bass guitar preamp.
Unit is very good condition and fully functional.
Unit is 220v"
Roland SVP-355 and Roland SBF-325
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Roland SVP-355 Pitch to voltage analog synthesizer.
Unit is in excellent condition and fully functional.
Roland SBF-325 Stereo Flanger.
Unit is in excellent condition and fully functional."
via this auction
"Roland SVP-355 Pitch to voltage analog synthesizer.
Unit is in excellent condition and fully functional.
Roland SBF-325 Stereo Flanger.
Unit is in excellent condition and fully functional."
ARP Pro-DGX (Repaired/Refurbished)
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
Pics of the inside below.
"This Arp Is fully working and has been repaired as necessary. Cosmetically its in Okay condition. See pictures for biggest scratches on the top of the case. Bottom is missing rubber feet for one of the large bolts, the other bolt’s rubber is soon to fall apart as well.
Repairs:
All tantalum capacitors have been replaced with same or better spec Nichicon capacitors. All power supply axial capacitors are replaced with same or higher rated Vishay capacitors.
New thermal compound was applied to power supply heat sink when re-installing power supply.
Board C (filter board) Has had 4 RCA CMOS switches removed and replaced with modern CMOS chips in sockets.
4075 VCF has had tantalum capacitors replaced and the filter mod to increase filter response. (Filter mod is correcting the low cut off frequency by changing out some resistors.)
Keybed has all new key bushings. Keybed has been leveled. Bus bar and key contacts have been straightened and cleaned.
Aftertouch sensor has been disassembled cleaned and repaired and is working.
All switches have been cleaned. Slide pots have been cleaned and lubed."
via this auction
Pics of the inside below.
"This Arp Is fully working and has been repaired as necessary. Cosmetically its in Okay condition. See pictures for biggest scratches on the top of the case. Bottom is missing rubber feet for one of the large bolts, the other bolt’s rubber is soon to fall apart as well. Repairs:
All tantalum capacitors have been replaced with same or better spec Nichicon capacitors. All power supply axial capacitors are replaced with same or higher rated Vishay capacitors.
New thermal compound was applied to power supply heat sink when re-installing power supply.
Board C (filter board) Has had 4 RCA CMOS switches removed and replaced with modern CMOS chips in sockets.
4075 VCF has had tantalum capacitors replaced and the filter mod to increase filter response. (Filter mod is correcting the low cut off frequency by changing out some resistors.)
Keybed has all new key bushings. Keybed has been leveled. Bus bar and key contacts have been straightened and cleaned.
Aftertouch sensor has been disassembled cleaned and repaired and is working.
All switches have been cleaned. Slide pots have been cleaned and lubed."
Multivox MX-202 SN 834097
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"Multivox MX-202 String & Brass synthesizer Made in japan total copy of Roland RS-202
there's a cool article in Sound on Sound about the 2 : '' Opening up my RS202 produced a second surprise. The boards in the Roland may be laid out differently from those in the MX202, but apart from a bit of point-to-point cabling in the Multivox where the Roland uses connectors, you could pull a board out of one of these synths, and stick it in the other. I'm not talking just about geometry here. Other than the keyboard mechanism and the details of which screw goes where, these boards are the same, right down to component level.
In other words, the MX202 and the RS202 are the same instrument. ''
Everything works, got that great analog sound, and you turn on those chorus options and bam ahhhh here it is, that Classic Roland vintage sound."
via this auction
"Multivox MX-202 String & Brass synthesizer Made in japan total copy of Roland RS-202
there's a cool article in Sound on Sound about the 2 : '' Opening up my RS202 produced a second surprise. The boards in the Roland may be laid out differently from those in the MX202, but apart from a bit of point-to-point cabling in the Multivox where the Roland uses connectors, you could pull a board out of one of these synths, and stick it in the other. I'm not talking just about geometry here. Other than the keyboard mechanism and the details of which screw goes where, these boards are the same, right down to component level.
In other words, the MX202 and the RS202 are the same instrument. ''
Everything works, got that great analog sound, and you turn on those chorus options and bam ahhhh here it is, that Classic Roland vintage sound."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
