( : MAM MB-33 AnAlog bAss synth. First little demo. More to come! Acid : )

YouTube Uploaded by Janoise on Oct 18, 2011

"MORE VIDEOS TO COME! XoXboX - Pigtronix mothership and these MAM MB-33.
Little first demo of the MAM MB-33 analog bass synth.
Not bad, good price vs quality."

Brochure display stand theremin

YouTube Uploaded by TechnikAlsace on Oct 18, 2011

"I was asked to develop a pitch-only theremin with a smooth and "convenient" sound, easy to setup, stable in tuning, no "negative" zone, which should serve as "ear catcher" integrated in a brochure display stand.

The brochures inform about the Node Festival "From the Theremin to the analogue Synthesizer" which will be held in Lausanne/Switzerland from January 28th to 29th, 2012. I'll be there... who else?

More info: http://www.node-rdv.ch and http://www.loopline.ch

Enjoy!"

This one reminds me if the old joke where you put a twenty dollar bill next a theremin at a party.

Arduino/Processing Controller

"A device made to control Processing sketches via Arduino.
It has 6 Potentiometers, 2 Switches and 3 Push Buttons.
You can also load a MIDI Firmata and use it as a MIDI Controller, or any other Serial Communication situation.
It is powered via USB.

I am playing with a Processing sketch here, doing some mods on the colors, shape and thickness of lines, etc.

Music: Gescom - MiniDisc - Is We"

LIDER-2 RARE SOVIET ANALOG GUITAR MICRO PROCESSOR SYNTH FX

via this auction
See mechanical animals
(RSS) for more.
"LIDER-2 (produced by Formanta factory in 1982 - the one which made a legendary POLIVOKS) is a guitar microsynthesizer designed to be applied by guitar players who use external effects in the live performance or studio work. The synthesizer is a floor-mounted unit with five rubber footswitches; it also has sliders and knobs for changing the parameters of effects. LEADER-2 has 5 main series sections: equalizer, flanger, chorus, solo, rhythm. - everyone with its own parameters and indicators. Commutation: line input, output (line, phone, amplifier). On the outer surface of the bottom panel, an input sensitivity regulator is situated.

Specifications:
— EQUALIZER: level, band;
— FLANGER: range, brightness, rate, width;
— CHORUS: frequency, detune;
— SOLO: spectrum, rocktone, suboctave;
— RHYTHM: guitar.
— Weight, 8 kg (approx. 18 Pounds)"

SN 9003222

CLICK FOR MORE »

Folktek Impressionist Drumscape percussion and drone synthesizer

via this auction

Sakata DPM 48 vintage drum machine

via this auction

"rare Sakata DPM 48 drum machine. This machine does not have the rom but does produce sounds when you hit the various function keys (tom, hi hat, snare etc.)."

Custom acidlab bassline 2

via this auction

via the seller: "Custom Acidlab Bassline 2 that Klaus built for me with silver knobs. This is the synth used on his AC Records label AC04 release. It is signed on the bottom 'Only for Acid Misfits -Klaus'"

CLICK FOR MORE »

Oberheim OB 12

via this auction

Elektron Monomachine SFX-60+ MKII with +Drive upgrade

via this auction

"Not only can you create 6 tracks of pulsating synth or drum rhythms... with the +Drive upgrade you can store thousands of patterns in its Snapshot memory. You won't run out of storage space!

You can also import you own samples into the Digipro memory."

CLICK FOR MORE »

10 Vintage PAiA EKx series kits

via this auction

"And indeed you must be a fan or an old timer if you remember these kits, the PAiA EKx Experimenter Series kits.

The concept was, if you were a bit more advanced DIY-er than the usual kit assembler, these kits allowed you to customize your own build of a complete module utilizing the provided Curtis CEM chips, circuit board and a handful of support parts. Kits were available for VCOs, VCFs, a Dual Channel VCA and a VC ADSR. They come with a data sheet for the chip and an assembly manual for the card.

This auction includes one such finished module, a VC ADSR made using a PAiA 9700 series Frac panel as the faceplate. It worked the last time I tried it, which has been several years ago. Should still work but I can't say for sure, so I won't. Has a standard PAiA power connector attached. VERY basic functions (no repeat function) but lots of mini jack VC ins and voltage outs, including an attenuated output and a fixed output.

Here is the deal on the unbuilt kits - the foam pieces that used to hold trim pots, sockets, etc. have turned into dust. TOTALLY. So all the bags with the parts, minus the Curtis chips which are packaged separately, are full of the black foam dust. It's a mess. You could clean up the support parts or throw them away. What you are really buying these for are the circuit boards and Curtis chips. The rest are common parts, and the included parts (things like trimpots) are pretty cheap ones.

Some of the bags have been opened and are probably missing some of those support parts anyway, but all but one kit has the Curtis chip and circuit board present. I do not claim all those support parts are there. They have been shuffled around for years and most likely some of the kits are missing some resistors, caps, etc.

The following kits are included in the auction:

1 EXx-10 VC ADSR
1 EKx -20 VCF
6 EKx-30 Dual VCA (can be set up to be Exponential or Linear response)
2 EKx -40 VCO (ONE OF THEM IS MISSING THE CURTIS CHIP)
a small bag of parts
and the assembled EKx-10 VC ADSR module

I make NO PROMISE that the Curtis chips are good. They should be, as they are still in the original packs, but who knows..."

CLICK FOR MORE »