MATRIXSYNTH: Tenderfoot


Showing posts with label Tenderfoot. Show all posts
Showing posts with label Tenderfoot. Show all posts

Wednesday, October 18, 2023

Exploring the Tenderfoot Electronics Pinhl LPG!


video upload by Signal Sounds

"Pinhl is a vactrol-based 3 channel passive low-pass gate.

Each channel of Pinhl features 3 different tones selectable with the switches on the front of the panel.

With the switch in the upward position, the channel is in low pass mode with a mild cutoff. When the switch is in the down position, the tone is darker with a stronger level of filtering. In the middle position, the channel bypasses the filtering circuit and acts like a passive vactrol-based VCA

In addition to this, the bottom channel of Pinhl is voiced slightly darker in tone than the top 2 channels for even more variety.

For more info check out:

https://tenderfootelectronics.com/col...

Or head on over to Signal Sounds!"

Wednesday, October 11, 2023

Tenderfoot Electronics - Source & Confluence


video upload by Signal Sounds



"Source is the new 10HP VCO from Tenderfoot Electronics. For more info head over to:

https://tenderfootelectronics.com/col...

OR

www.signalsounds.com

Features include:

Knobs and switches:
12-position octave dial for a huge range of frequencies.
Fine tune dial with a range of just over 1 octave to help you easily find the right pitch
VCO / LFO switch.
Frequency Range of 18kHz (VCO mode) down to around 180 seconds per cycle (LFO mode)
Pulsewidth Dial
Sub select switch (-1oct, -2oct, -2oct 25%pulse)
Soft / Hard sync

CV inputs:
1V/oct
Exponential FM (with attenuator)
Linear FM (with attenuator)
Pulse width modulation (with attenuator)
Sync input

Outputs
Triangle
Saw (down ramp)
Pulse / Square
Sine
Sub (square / pulse)

INCLUDED IN THE BOX AT PURCHASE:
When getting hold of your source VCO, you will also get its expansion module Confluence in the same box! No need for an additional purchase.

Confluence adds 2 channels of waveshape mixing to your Source VCO along with a white noise generator. The output crossfader allows you to seamlessly morph between the 2 mixer channels for evolving waveshapes (using this in LFO mode gives you a wild CV source!).

VIDEO CONTENT
0:00 - Intro/Overview
2:17 - PWM, Mix Modulation + Echo & Feed
5:15 - Soft Sync
8:00 - Outro"

Wednesday, September 27, 2023

Tenderfoot Electronic Echo & Feed - Lofi, Digital Dub Delay!


video upload by Signal Sounds



"Echo is the new lo-fi digital delay module from Tenderfoot Electronics. Based around the PT2399 chip, with its fixed 44k of memory, slowing the delay times adds some wonderfully crunchy character to your audio.

Echo has been designed to get every little bit out of the PT2399 to give you delay times from 30ms (opening up the ability for using it as a chorus) down to around 2.5seconds, where it gets oh so crunchy and glitchy.

The feedback control allows you to go from 1 repeat to an infinite slew of gradually degrading lo-fi echo trails.

The feedback loop features send and return jacks to allow patching of other effects or filters into the loop.

INCLUDED IN THE BOX
Echo ships with its expansion module Feed in the box! No need to make a second purchase to get the extra features that you deserve.

Feed adds:

Manual (via an ON-OFF-MOM switch) and CV control of the input into the delay loop, allowing you to be selective over what ends up going into the feedback trails. Think dub-style delays for eurorack!

A panel-mounted switch to control the low pass filter of the echo module.

For more information visit:

https://tenderfootelectronics.com/col...

Or head on over to: https://www.signalsounds.com/

#synth #delay #eurorack #modular"

Friday, October 15, 2021

TEST SERIES 8x Ornament & Crime Tenderfoot Electronics Pinhl LPG Intellijel Eurorack Modular


video upload by Outsider Sound Design

"WARNING!!! This video has fast flashing lights which can cause problems for some viewers.

Sound design experiments with 8 Ornament & Crime, Tenderfoot Electronics Pinhl Low Pass Gate, and Intellijel modules.

The purpose of 'TEST SERIES' is to focus on the sound design possibilities of various gear combinations. This series is not musical nor does it serve as an instructional video. It is all about sound potential.
Please consider supporting this channel by purchasing a sample pack or music download from www.outsidersounddesign.com"

Tuesday, January 08, 2019

Molten Modular 27 - Tenderfoot Lattice sequencer and Cells review


Published on Jan 8, 2019 Molten Music Technology

"Lattice is a delicious 12-step Eurorack sequencer that is the model of simplicity and terribly musical. Cells is an expansion that makes it playable and takes it in new directions. Here's my full review with lots of footage of the thing in action.

Intro - 0:20
Lattice - First Steps - 1:32
Step-down, Step-right and Reset - 13:24
Gating and envelopes - 19:15
Sequencing as modulation - 21:06
Cells Expander - 25:05
Reverse - Random - CV in - Gate - 28:01
Working up a patch - 33:53
Conclusion - 35:30
That'll do - 43:22"


via Tenderfoot

"Lattice is a 12-step sequencer laid out in 4 rows of 3 steps. These steps can be navigated horizontally, vertically, or sequentially through all 12 steps. Sending different clock inputs from related or unrelated signals can open up a whole world of evolving, polyrhythmic goodness."

Priced at $175.00

Note this is the first Tenderfoot post on the site.
NEXT PAGE HOME


Patch n Tweak
Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH