MATRIXSYNTH: TubeOhm


Showing posts with label TubeOhm. Show all posts
Showing posts with label TubeOhm. Show all posts

Monday, October 03, 2022

Tubeohm Jeannie Polyhonic DIY Synthesizer 400 Patches


video upload by Rolf Degen

"Jeannie Polyhonic DIY Synthesizer 400 Patches
DIY Project: https://www.sequencer.de/synthesizer/..."

Friday, September 09, 2022

TubeOhm SMR4P-Multi


video upload by Andre' Laska

"Stress test of the filter. No audio in signal was used. All sounds were generated with the filter resonance. A signal generator was only used to control the resonance and the different filter types. The video is handheld with a mobile phone. I thought it would be interesting for you to see what the filter alone can do.
The sound was recorded with a mobile phone."



The SMR4P-Multi contains the best from 2 worlds . First , it sounds warm like the SMR4 and second -
15 different filtertypes like the 4PM.
While doing sounddesign it is very helpfull to have a ' swiss knive' VCF. So we implement 15 different filtertypes like
6+12+18+24dB LP 6+12+18 dB HP 6+12 dB BP HP2LP, HP3LP Notch,Phaser, Notch+LP1, Phaser+LP1.

What else we have build in ?
There is also a FM posibility, an inbuild VCA , and you can switch the different filtertypes a:) manual or b:) voltage controlled.
Inputs: Audio in, Res= resonance contol (0..10 V),Gain(VCA control 0..10V) , Mod (extern) and Cut(V/OCT0..10V)
Outputs : VCA and VCF *** VCA, the output singal is contolled in its amplitude by Gain 0..10 v
VCF is the direct signal without VCA controll
DIY scills : good soldering knowledge , high integrated parts - through hole , no SMT

https://www.tubeohm.com/smr4p-multi.html

Saturday, August 20, 2022

Jeannie Polyhonic DIY Synthesizer Part 17: LFO3 AMP modulation


video upload by Rolf Degen

Sunday, May 29, 2022

Teensy 4.1 Polyphonic DYI Synthesizer Part 14: Filter experience


video upload by Rolf Degen

www.tubeohm.com

Wednesday, February 16, 2022

Jeannie Polyphonic DIY Synthesizer


video upload by Rolf Degen

"Jeannie State Variable und Ladder Filter"

Saturday, January 22, 2022

Jeannie Polyhonic DIY Synthesizer Envelopes


video upload by Rolf Degen

Monday, January 10, 2022

Torso Electronics t-1 - TubeOhm Jeannie - Norand Mono - Novation Circuit Rhythm / SequencerTalk Jams


video upload by

"Everything is sequenced with the Torso Electronics t-1 and the drum sounds on the Novation Circuit Rhythm are quickly sampled from the Norand Mono.
This wonderfull TubeOhm Jeannie drone pad is sequenced by the t-1 with 4 different Tracks and everything is mixed on the 1010Music Bluebox."

Friday, January 07, 2022

TubeOhm Jeannie - 8 Voice DIY Synthesizer / SequencerTalk Jams


video upload by SequencerTalk

TubeOhm Jeannie DIY Synthesizer

- 8 Voices Polyphonic
- 2 OSC (945 different waveforms each) + Noise
- 2 Envelopes
- Multimode Filter
- 10 different Waveshaper
- 2 LFOs
- Ring Modulator, FM, XOR, OR
- Step Sequencer (16 Steps) Polyphone
- 14 adjustable effects

Thursday, December 16, 2021

Jeannie & Volca in Love


video upload by Rolf Degen

"Teensy polyphonic DIY Synthesizer

Tubeohm.com"

Additional Jeannie posts

Friday, November 12, 2021

TubeOhm Jeannie 8 Voice Polyphonic DIY Synthesizer w/ FX Now Available



You can find demos in previous posts.

via TubeOhm:

The Jeannie DIY Synthesizer
What is it anyway ?

Jeannie It is an 8 voice polyphonic DIY synthesizer, 2 oscillators, 2 envelopes, multimode filter, waveshaper,2 LFO, ring, sync,FM , Xor,or, and a step sequencer . The oscillators have 945 different waveforms each. More than 2000 sounds can be stored on the SD-Ram card

*** Very new are the 10 adjustable waveshaper behind the filter. This gives . The synthesizer contains a digital FX, but it can be extended with up to 14 different effects (programmable and storable) via an additional board containing a DSP.

Jeannie - DIY Synthesizer, technical data

Power supply unit 12 V DC -minimum 1 A , plug 5.5 - 2.1 centre positive
micro SD RAM Karte 8..16 GB
Power consumption 3.6 Watt

8 Voices polyphonic
multimode Filter
2x ADSR
2x LFO
different Waveshaper
945 different waveforms per oscillator
2 Oszillatoren pro voice
xor, xmod, modulo, and, or and FM
Step Sequencer - 4 Voice poly - in the latest firmware
8-fold unison mode with up to 16 oscillators / one voice
FX with Reverb, Chorus, Delay , Pitchshifter...../ external modul
adjustable clock frequency for the FX DSP - dirty effects
2048 programmes can be stored on micro SD card
graphic LCD display
Teensy 4.1
DIY friendly

Jeannie - DIY Synthesizer FX Board

___________Factory effects
clock rate ajustable 10...60 khz
low noise output
Chorus 1
Flanger
Tremolo
Pitch shift
pitch shift/echo
Reverb 1
Reverb 2

__________Tubeohn new effects
X-Delay
Chorus 2 /5 stage
Tonator
Phaser
Flangerator
Distorter
Stereo Echo/Rev
Gate

The FX board is based on a Spinsemi FV-1. At first we wanted to switch off the built-in effects programmes, but some of them are quite usable. We have also programmed 8 new effects.

Wednesday, October 27, 2021

Jeannie Polyphonic DIY Synthesizer Part 6: Sound Demo


video upload by Rolf Degen

Jeannie Polyphonic DIY Synthesizer posts

Tuesday, October 12, 2021

Polyphonic DIY Synthesizer "Jeannie"


video upload by Rolf Degen

Sunday, October 10, 2021

DIY Synthesizer "Jeannie" Part 5: Polyphonic Sequencer


video upload by Rolf Degen

DIY blog: https://www.sequencer.de/synthesizer/...

Wednesday, September 22, 2021

DIY Synthesizer "Jeannie"


video upload by Rolf Degen

"Sound Demo 4

with and without inbuild DSP Effekt"

Sound Demo 5


See the Rolf Degen label below for more.

Thursday, September 16, 2021

"Jeannie" Polyphonic DIY Synthesizer


video upload by Rolf Degen

Additional posts

DIY Projekt in deutsch: https://www.sequencer.de/synthesizer/...
DIY Project in english: https://forum.pjrc.com/threads/63255-...

Wednesday, August 25, 2021

DIY Synthesizer Jeannie Sound Demo


video upload by Rolf Degen

"DIY Synthesizer Jeannie Sound Demo
www.tubeohm.com
DIY blog: https://www.sequencer.de/synthesizer/..."

Additional Jeannie posts

Monday, May 03, 2021

TubeOhm DIY JEANNIE Synthesizer


video by Andre' Laska

"First ( and fast) preview of our new DIY synthesizer Jeannie. It is 8 voices polyphonic and has an internal effect chip with reverb / echo / delay etc.

Jeannie is based on the Teensy 4.1 and the FV-1 chip.

Specs :
-8 Voices
-2 Oscillators /Voice
Wavetable with 180 waves / each oscillator
2 LFO
2 ADSR
1 multimode filter
UNISONO with 16 Oscillators
XOR / ring mod
14 effects
Fully programmable
Up to 1000 sounds can be stored.

Coming soon as a DIY kit."

Saturday, May 01, 2021

TubeOhm Teensy 4.1 DIY Synthesizer "Jeannie" Preview 2


video by Rolf Degen

"Teensy 4.1 DIY Synthesizer "Jeannie" Preview 2

Link englich: https://forum.pjrc.com/threads/63255-...
Link german: https://www.sequencer.de/synthesizer/..."

Follow-up to this post.



Some pics from 1st draft to completed build.

Sunday, April 25, 2021

Teensy 4.1 DIY Synthesizer "Jeannie"


video by Rolf Degen

"First sound samples with PCM5102A DAC"

Sunday, January 03, 2021

Teensy 4.1 DIY Synthesizer


Rolf Degen

Teensy 4.1
DIY Synthesizer "Jeannie"
Part 3: Waveforms


See the Rolf Degen label below for more.
PREVIOUS PAGE NEXT PAGE HOME



Switched On Make Synthesizer Evolution Vintage Synthesizers Creating Sound Fundlementals of Synthesizer Programming Kraftwerk

© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH