BP Photoshops Another Official Image Terribly

See this article on Gawker for context if you don't know what this is about. Credit for this one goes to chopstar in the comments of the article.

This one in via Gerard.

I Love Making Music: Puremagnetik.com

I Love Making Music: Puremagnetik.com from WinkSound Studios on Vimeo.

"I Love Making Music is a series of mini-docs that explore NYC's new music production culture.

In this episode of I Love Making Music, Angelo visits Puremagnetik, a company located in Brooklyn, NY specializing in creating sound content for Ableton Live, Kontakt, Logic Studio and other music production software. Co-founder and sound designer Micah Frank explains the process behind creating their custom MicroPaks including the Big Bertha, Microtron and Analog Drums.

For more info on Puremagnetik and to download free PakBytes visit: puremagnetik.com"

BB Bass Adlib

YouTube via Rothgar777 | July 22, 2010

"Having some fun with the EMX. Im not sure if I'm in the right key, but the drums are spot on. Anyone recognize the song I'm playing over?"

Access TI2's

flickr by Nova Musik
(click for more)

"Shown here:

TI2 Keyboard
TI2 Whiteout Edition
TI2 Desktop Whiteout Edition
TI2 Polar
TI2 Desktop
TI Snow

www.novamusik.com

www.novamusik.com/search.aspx?type=Manufacturer&keywo..."

1970's Ludwig Phase II Synthesizer Vintage Pedal Effect

via this auction

CLICK FOR MORE »

Analogue Solutions SY03 Low Pass "Moog" Filter / VCA

via Noisebug on Ebay

"Analogue Solutions Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching.

The red stripe on the power ribbon is red line down if used with Doepfer cases.

Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request.

Width 18HP

The SY03 is a VC low pass filter and VCA in one module. The VCA is hard-wired in series after the filter output. The filter is a transistor ladder 'Moog' type filter. Resonance can be set to feedback.

Controls In Detail

SIG1 LEVEL
Audio input signal attenuator for the signal coming into the SIG12 socket.

CV1 LEVEL
CV input signal attenuator for the signal coming into the CV1 socket.

CUT OFF
Alters the filter cut-off frequency.

RESONANCE
Alters the filter feedback level.

VCA LEVEL
VCA CV level attenuator for the signal coming into the VCA CV socket. When no jack plug is in that socket, the control is used to attenuate a full CV level (+12v).

Sockets In Detail

SIG1 IN
Signal input to the filter, level affected by SIG1 control.

SIG2 IN
Second input to the filter. There is no level control.

CV1
Cut Off CV input, level affected by CV1 LEVEL.

CV2
Second CV input. There is no level control.

VCA CV
VCA CV level input, level affected by VCA LEVEL control. When no plug is in this socket, the VCA receives a full (+12V) CV level, which can then be attenuated by the VCA LEVEL control."

Analogue Solutions Eurorack VCO

via Noisebug on Ebay

"Analogue Solutions Concussor Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching.

The red stripe on the power ribbon is red line down if used with Doepfer cases.

Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request.

Width 6HP

The VCO 6HP is one of the newest offerings from Analogue Solutions. This slim VCO is designed to give you maximum raw analogue power without taking too much real estate in your case or rack. The range is divine and can go down enough to be used as a LFO.

Voltage Controlled Oscillators (VCOs) in general

The VCO or signal generator, commonly found on most music synthesizers consist of an exponential amplifier, a resetable integrator and waveshaping circuitry. ‘Voltage Controlled Oscillator’ means an oscillator whose frequency can be controlled by an external voltage.

A VCO is responisble for the pitch of a sound and its basic timbre. Most VCOs will offer a variety of wave forms. Some VCOs offer the facility to alter the pulse width of a square wave either manually or with a voltage (pulse width modulation).

Controls In Detail

Tune
The VCO has a wide ranging tune control. Turning Tune alters the basic pitch of the oscillator.

Pulse Width
You can alter the pulse width (duty cycle) of the square wave. Turning this gives a sound similar to chorusing. In the centre position a square wave is produced.

Square Level
This sets the output volume of the square waveform output.

Sockets in Detail

CV in
This socket is the pitch CV control input and is used to control the pitch of the oscillator.

PW
This is a pulse width control CV input. Use a -12 to +12V voltage in this socket to alter the pulse width of the oscillator square wave.


Sawtooth Out
This is the audio output for the sawtooth waveform.

Square Out
This is the audio output for the square waveform. Its level is affected by the square level pot.

General Specification

Inputs
CV
PW
Outputs
SAW
SQUARE
Controls
Tune
Square Level
Power
+/-12V, GND using Doepfer power socket."

Analogue Solutions CVM Dual Channel CV to MIDI Converter

via Noisebug on Ebay

"Analogue Solutions Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching.

The red stripe on the power ribbon is red line down if used with Doepfer cases.

Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request.

Width 10HP

Manufacturer Description:
CVM CV to MIDI Converter
CVM is a dual channel CV to MIDI Converter. It’s primary task is to enable MIDI synth modules to be ‘played’ by analogue sequencers.

A typical example would be our Oberkorn analogue sequencer controlling 2 voices of a Waldorf Blofeld synth module.

It is designed to be quick and easy ‘plug in and play’ with no parameters to set. Just ensure your MIDI module is set to channel 1 and 2 and that’s it!

Each channel has;

CV1 Input
This will convert a voltage to a MIDI note number.
The range is 0-5V, giving an approximate note range of 0-127.

CV2 Input
This will convert a voltage to MIDI velocity. If this socket is not used a velocity of approximately full value (127) will be used.
In your sound module, assign Velocity to control filter cut-off for excellent sequences!
The range is 0-5V, giving an approximate velocity range of 0-127.

Gate Input
This will converter on/off gate voltages to MIDI Note On/Off messages.
The range is 0-5V. 5V is note on.

How It Works
Each time the Gate socket goes high (i.e. 5V/Note on) the CPU will sample the CV1 and CV2 inputs, then send a MIDI note on message (which also contains velocity data). When the gate goes low (0V) the CPU will send a MIDI note off.

MIDI Channels
CVM channel 1 is set to MIDI channel 2, and CVM channel 2 to MIDI channel 2.
The MIDI channels are set and cannot be changed.
The CV inputs are pre-assigned to MIDI note and MIDI velocity and cannot be changed.

LED
The LED will trigger each time MIDI data is sent out.

MIDI Out
Connect this to the MIDI In of your sound module.

Scaling
CV1 is not calibrated to any particular scale. It is ‘approximately’ 1V/octave. This is to keep cost down, and anyway, in my opinion calibration is not necessary.

CVM was designed to be used with analogue sequencers. These sequencers do not really have a pitch scaled output. They simply output a continuously variable voltage, usually from 0 to 5 (or sometimes 10) Volts. The output can further be changed with transpose voltages, mixed with LFOs, and changed entirely in range via a Range control (output attenuator).

Specification
Width 10HP
Power 5V, 30mA
CV Range 0-5V"

Analogue Solutions SY04 VCA & VCF

via Noisebug on Ebay

"Related Items:
Analogue Solutions Modules are the same physical size and use the same power connectors as Doepfer a100 modules. They will mount in Doepfer eurorack cases and are 100% compatible when patching. The red stripe on the power ribbon is red line down if used with Doepfer cases. Included is a eurorack power ribbon and eurorack screws. Analogue Solutions screws available upon request. Width 6HP

Manufacturer Description:
VCF & VCA in one compact module.
Use Filters to change the Tone of a VCO.

A cut-down versions of the SY03 module in a compact 6HP size.

Controls:
Cut Off, Resonance

Connections:
Signal 1 input, CV 1 and 2 inputs, VCA CV input, Signal Output."

Moon Modular 554 Octal Clock Divider

via Noisebug on Ebay

"The module format follows industry standard (synthesizers.com/Moog/Curetronic/Mos-Lab etc.)

Module Size: 2 unit space

Modules work with supply voltages of -12...-15 Volts/+12...+15 Volts

Two power connectors are on-board (synthesizers.com/Club of the Knobs),
Threshold voltage of the trigger inputs is +1 Volt.

The modules are ready to be used: insert the module, connect the power plug,
attach with a couple of screws and the fun starts...


Related Items:
Module Size: 2 unit space



Manufacturer Description:
The M?554 OCTAL CLOCK DIVIDER
combines eight divider circuits in
one module.
Each of the dividers offers twelve
division factors:
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 10 / 12 / 16 / 32
and has its own LED indicator.
In position 1 the clock signal is fed
through and the internal divider
will be reset.
The input jacks are normalized to
allow complex divider combinations
without external patching:
Input 1 is daisy chained to input 3,
input 3 to 5, input 5 to 7.
Output 1 is daisy chained to input 2,
output 3 to input 4,
output 5 to input 6 and
output 7 to input 8."
http://moonmodular.com/