MATRIXSYNTH

mike huckaby / maschine triggering the gotharman demoon

YouTube via mikehuckaby | August 17, 2010

"This is a basic demonstration of how Maschine can trigger your external gear. The maschine controller is quite useful in many situations. Im going to get a lot of use from this. The gotharman demoon is a limited S Y N T H from Denmark with no more than 100 made. Its extremely limited. I am in discussion with the company about making presets, and a custom " Mike Huckaby Gotharman Demoon version" of this S Y N T H. Stay tuned..."

Sean_Beavan on the Rob Papen Synth

YouTube via robpapen | August 17, 2010

"Predator, RG, Subboombass, Marilyn Manson, 8mm, Rob Papen, Synths, RP, Sean Beavan, Nine Inch Nails, RP-verb"

Flight of Harmony Infernal Noise Machine

via this auction

"These rarely pop-up on the 2nd hand market and I'm assuming if you're looking at this you probably know what it is. If not, it's basically an experimental musicians wet dream. Total cacophony and loads of CV control. It excels at drones, percussion oriented stuff and just outright noise =) All in a very attractive package. These run well above what I'm asking here. $666, last time I checked.

Auction item includes

FOH Infernal Noise Machine
power supply

Info from Flight's site:
* VCO:
o Square, Saw, Ramp, Triangle and Sine waveforms
o ~0.5Hz-~140kHZ
o 1V/oct
o Temperature compensated
* VCF:
o Improved performance overall
* VCA:
o IImproved range, attenuation and general performance

IMP
* Domains (frequency range groups)
o 4 switch-selected
* Frequency adjustment
o Coarse and Fine
o Fine scaling adjustment (relative to Coarse) – 5:1 to 25:1
* Range adjustment (range of frequency variance within domain)
o Coarse and Fine
o Fine scaling adjustment (relative to Coarse) – 5:1 to 25:1
* Low-Pass Filter
o Bypassable
o Variable cutoff
* Control Voltage (CV) inputs
o Frequency: 0 to +5V
o Range: 0 to +5V
* Output
o variable"

trouby modular - LED FUZZ

via these auctions

Googlish:
"Distortion based on two LEDs - if it drags, lit:) If only Anzerren or full traction;) controls for input level and gain. This copy has high-frequency oscillation - must see whether the views are just the beginning ... ask for a full copy simple:)"

trouby modular - masterclock generator

via this auction
"This device is dedicated to give a clock signal to sequencers, beatboxes or what a clock needs.

Outputs:
twice quaver, semiquaver, semisemi quaver and a triple Start/Stop level.

Handling:
look at the table below for your desired tempo and select the 2 digit values with the 2 rotary switches - tempo based on semiquaver. Then press START to keep out clock pulses, the beat LED will flash.

Technical:
- clock pulses: DIN Sync compatible, 1ms wide 4V TTL voltage
- Start/Stop: Stop=0, Start=1 - like the GO signal for the DotCom sequencer.
- It's not a 555 inside - it gets it's precision by a quartz oscillator and contains 3 divider stages, 1 programmable.

Cabinet hint:
the bpm table is a blind plate.
For the curetronic cabinet, the masterclock module doesn't fit at right or left border - keep the bpm table beside this.
The photo doesn't show the proto itself, the front is direct-printed (haven't a camera)."

doepfer a-143-2 quad adsr

via this auction

Oberheim OB-8

via this auction

"For sale is one Oberheim OB-8 vintage analog synthesizer with factory MIDI. It has the latest firmware which includes page 2 functions"

CLICK FOR MORE »

Oberheim Xpander

via this auction

CLICK FOR MORE »

LINN9000 - COMPLETELY SERVICED/UPDATED BY BRUCE FORAT

via this auction

"This Linn9000 is completely serviced/restored/updated by Bruce Forat at Forat Music Electronics in the US.

The work Bruce Forat has done on this Linn9000 consisted of :

- replacing/adjusting all drum pads
- cleaning the in/outputs
- cleaning/replacing of the faders
- installing a new Nicad backup battery
- enlarge the sequencer capacity to 43,000 notes

- installing a new 240 V. power unit
- installing SMPTE reader and generator card (required for midi sync/clock in)
- Besides the 40 K.ram memory that was already available in this Linn9000, Bruce added a 68K static RAM memory expansion. I also transferred an other 128 K.ram card into the Linn9000 so now the total is 236 K. ram memory in total.
- installing the latest 7.09. software. Some of the many features are as follow:

On screen editing features such as Event and Global edit (note, velocity, duration, tuning, hi hat decay and erase), two types of punch (manual or programmable), recording all controllers such as MIDI volume etc., event chase, MIDI drum note assignment, copy individual tracks or drums, merge and replace, Time shift of notes and drum events, re-timing correction of individual drums or tracks after recording, 156 steps of drum tuning recordable during the sequence, MIDI System Exclusive recording for keyboard sounds, sample editing (truncate, reverse and fade), drum solo and mute, better and faster erase and many more.

Besides all these incredible features, the Linn9000 has an installed sampleboard (A/D converter) to load and record samples into the Linn9000. In this way you can load the recorded samples you want to use for your music project. Also 2 extra trigger input cards are installed!! So there are 12 trigger inputs you can use

The Linn9000 also comes with the latest 7.09 software manual to guide you through all the amazing features!"

CLICK FOR MORE »