ROLAND GR-300 POLYPHONIC GUITAR SYNTHESIZER SN 021284

Note: Auction links are affiliate links for which the site may be compensated.
via this auction

CLICK FOR MORE »

MODULAR 12HP MFOS KIT WAVE FREAKER Euro Kit

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"BUY IT NOW IS FOR A EURO FORMAT PANEL KIT. IT IS TO CONVERT THE MFOS WAVE FREAKER [video here] INTO A EURO/DOEPFER COMPATIBLE MODULE. YOU NEED TO PURCHASE THE WAVE FREAKER PCB FROM MFOS

You need to build the Wave Freaker yourself and then use this kit to solder yourself a Euro Compatible Module.

I include the Black Panel, mounting bracket, washers, screws, and spacers. I have a picture of what is in the kit. EURO PANEL SCREWS ARE ALSO INCLUDED

There is (2) ways to mount the PCB using the Bracket. STYLE A: measures 5.25" from panel to back. STYLE B: gives you 1" space from panel but then takes up 4.75" going to the left.

Look at the pictures I used both styles. I myself had to use STYLE B and placed the Module next to other fancy SMT modules that where skinnier then 1" on the back.
It is possible to give more clearance for STYLE B but you would have to buy the longer screws yourself.

First here is the BOM needed from Mouser to use on the Panel Circuit:
(6) MOUSER# 16PJ138 (3.5MM JACKS)
(7) 100KB POTS MOUSER # 858-P160KN0QC15B100K
(1) 5mm T1 3/4 LED
(1) 1/4" SIZE LED HOLDER OR LENSE (HOLE SIZE IS 1/4")
(7) KNURLED KNOBS
(1) SPDT OR SPST SWITCH (HOLE IS 1/4") SO USE MINIATURE TOGGLE SWITCH
(1) SMT 10 PIN IDC HEADER. MOUSER PART# 649-95278-101B10LF
(2) PTC SMT RESETTABLE FUSES MOUSER #576-1812L050PR , THESE ARE OPTIONAL. IF YOU DECIDE NOT TO USE THEM YOU CAN SOLDER JUMPERS ACROSS THE SMT LOCATION.
(1)10 PIN TO 16 PIN IDC POWER CABLE. YOU CAN BUY ONE FROM EBAY OR BUILD ONE.

THE PANEL HAS TRACES ON IT TO MAKE IT EASIER FOR WIRING. YOU ONLY HAVE TO CONNECT (1) GROUND WIRE BECAUSE OF THE NICE TRACES I LAYED OUT FOR YOU. SO ALL YOU HAVE TO DO IS CONNECT ALL THE X1-X21 WIRES TO THERE LOCATIONS. I PLACED SMT PADS TO MAKE IT EASY. THE POTS LEGS GET BENT FORWARD TOWARD THE PANEL AND THEN GET SOLDERED ONTO THE PADS FOR A NICE STABLE MOUNT.
THE POWER CABLE ALSO GET SOLDERED ONTO THE BACK OF THE PANEL ON PADS. SO IN OTHER WORDS YOU CONVERT THE MFOS WIRES INTO EURO/DOEPFER 10 PIN POWER HEADER."

Dynacord - Time Axis Manipulation Device a.k.a. TAM-21

YouTube Published on Apr 17, 2012 by joyoussound

"The weird & the wonderful modulation device made in the 70's. It's a doubler, chorus, flanger, stereo spatial expander, special fx device...
The results can often surprise you ;)

How I wish they still made them like that."

leploop... what the hell am I doing???

YouTube Published on Apr 17, 2012 by FuckingSynthesizer

"getting stuff out of storage is like Christmas kind of... this week I set myself to learning how to play a leploop synthesizer, it interfaces very nicely with the Vostok!"

GEM PK-4900 italian synthesizer + TC Alter Ego delay (Binson Echorec preset)

YouTube Published on Apr 17, 2012 by joyoussound

"Italian analog synthesizer for monophonic leads and polyphonic strings / brass played trough TC Electronic Alter Ego delay set on Binson Echorec preset. Really gorgeous sound.

Sorry for the bad quality recording though. It's completely my fault."

Hadikat Raja XVII

Hadikat Raja XVII, Première Partie

YouTube Published on Apr 16, 2012 by RADIOKLOW

"Seventeenth visit to the Garden. Composed for Doepfer A100"

Doepfer composition coupled with GRM tools [link] in real time. Access Virus appears four times to briefly underline the main flow of the piece: from 0.38mn to 1.29m, 3.29mn to 3.49mn, 10.11mn to 10.15mn, and at last from 10.24mn to 10.40mn.

Hadikat Raja XVII, Deuxième Partie

Published on Apr 17, 2012 by RADIOKLOW

Jim's Tips & Tricks: Prelude and Fugue in J - Video Song #2

YouTube Published on Apr 17, 2012 by jimmclaren1
Picks up at 1:16.

"Please subscribe! Was inspired to write a Fugue by my wife, so I did! The Fugue theme starts the song recorded into Garageband on the iPod touch, sent through the Moog Filtatron for iPad. Prelude follows, plus full Fugue afterwards - all recorded on my favourite instruments. Strats, a Rickenbacker 4003 with vintage pickups, Chapman Stick, Korg Monotron and Monotribe and Moog Littly Phatty."

iTunes:
Moog Music Inc.
GarageBand - Apple
iPads on eBay
iPod Touch on eBay

Caustic app Substance expansion sample pack demo - drum kits

YouTube Published on Apr 17, 2012 by Audiovapor

"Audiovapor Substance V1 and V2 expansion sample packs for the Android Caustic 2 app now available. V3 available soon. This is a demo of the 30 beatbox drum kits from the packs.

Also in the Substance expansion packs are many multisampled bass, lead, pad, and percussion patches for the PCMsynth.

Get the Substance expansion packs within the Caustic 2 app (Get More) or from Google Play: http://bit.ly/JavdrN

More info: www.audiovapor.com"

The Kicron - First Hungarian Drum Synth

via MIDIpolis: "This upcoming project is called Kicron. Only one voice but that voice kick your body up in your mind... Kicron is a state-of-the-art analog kick drum generator based on 909 and 808 circuits and concepts. More than 20 programmable parameters and total MIDI control in a compact form. Scheduled release in October."

The April acid pattern

via Dylan:

"new acid pattern for April from http://soundcloud.com/ynohtna aka 'Low Brow Eye Ltd is Anthony Bowyer-Lowe's consultancy think tank dedicated to producing creative, cutting edge solutions to challenging problems through the synthesis of design, technology and artistry.' http://lowbroweye.com/


Aleph Null - Rocket 303 to Cosmos 808 [April Acid pattern] by ynohtna
Equipment used on the track is tb303 and tr808 and Alpha Juno (bass tones), Dark Energy (for filtering), 2x Lexicon Vortex, Lexicon Reflex, 2x Alesis Wedge, Ensoniq DP4, and tons of EQ and stuff.

Group trax are here
http://soundcloud.com/groups/the-acid-question/tracks"
The Monthly Acid Pattern