via this auction
"FLAWLESS GENOQS OCTOPUS. This thing still looks BRAND NEW. The mother of ALL MIDI sequencers, if you're looking, then I am sure you know what this is..."
If not, see the genoQs channel label at the bottom of this post for more.
Wednesday, February 19, 2014
BEAUTIFUL Genoqs Octopus Sequencer
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"FLAWLESS GENOQS OCTOPUS. This thing still looks BRAND NEW. The mother of ALL MIDI sequencers, if you're looking, then I am sure you know what this is..."
If not, see the genoQs channel label at the bottom of this post for more.
via this auction
"FLAWLESS GENOQS OCTOPUS. This thing still looks BRAND NEW. The mother of ALL MIDI sequencers, if you're looking, then I am sure you know what this is..."
If not, see the genoQs channel label at the bottom of this post for more.
Roland SH-09 SN 086392
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Click the pics for the supersize shots.
via this auction
Click the pics for the supersize shots.
MFB NANOZWERG Analogue Monophonic Synth
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"The analogue VCO generates four waveform shapes: Triangle, saw tooth, rectangle and needle-impulse. The base pitch can be switched over a four-octave-range, while fine-tune can be specified within a range of one octave. The sub-oscillator with two mixable octave settings completes the NANOZWERG’s sound foundation. The noise generator can alternatively replace the sub-oscillator to create non-harmonic sounds. Finally, a glide-control can be used to tie notes with portamento.
The state-variable multimode-filter runs with 12dB slope per octave and offers Lo-, Hi- and Bandpass-modes as well as notch-filtering and resonance up to self-oscillation. Cutoff can be modulated manually, by LFO and by the ADSR-envelope simultaneously. In addition, pitch-dependent cutoff-frequency can be achieved using the key follow function. Finally, LFO modulation can be replaced by the VCO output signal.
The LFO offers four waveform shapes including sample & hold as well as a one-shot-function, where the selected waveform is played only once after a gate-trigger, thus imitating a simple envelope. Besides the cutoff-frequency, the LFO can also modulate the pitch or the VCO rectangle’s pulse width.
The ADSR-envelope allows modulation of the filter’s cutoff-frequency and the VCA-output, with positive or negative excursion. Selectively, the VCA can also be opened by a gate-trigger to free the envelope for exclusive filter use.
For integration into a modular system or use with an analogue sequencer, NANOZWERG offers several control inputs. There is CV/Gate for pitch control and note length as well as CV-inputs for cutoff-control, the VCA and LFO speed. The LFO also offers CV-output.
The audio-input allows signals to be fed into the VCF and VCA. NANOZWERG can be controlled by MIDI from any compatible keyboard or DAW. Note commands are received as well as pitch-wheel (+/- 2 semitones) and modulation-wheel data, the latter controlling the filter’s cutoff frequency.
MFB’s NANOZWERG has the following dimensions: 140 x 130 x 35 mm.External power supply included."
via this auction
"The analogue VCO generates four waveform shapes: Triangle, saw tooth, rectangle and needle-impulse. The base pitch can be switched over a four-octave-range, while fine-tune can be specified within a range of one octave. The sub-oscillator with two mixable octave settings completes the NANOZWERG’s sound foundation. The noise generator can alternatively replace the sub-oscillator to create non-harmonic sounds. Finally, a glide-control can be used to tie notes with portamento.The state-variable multimode-filter runs with 12dB slope per octave and offers Lo-, Hi- and Bandpass-modes as well as notch-filtering and resonance up to self-oscillation. Cutoff can be modulated manually, by LFO and by the ADSR-envelope simultaneously. In addition, pitch-dependent cutoff-frequency can be achieved using the key follow function. Finally, LFO modulation can be replaced by the VCO output signal.
The LFO offers four waveform shapes including sample & hold as well as a one-shot-function, where the selected waveform is played only once after a gate-trigger, thus imitating a simple envelope. Besides the cutoff-frequency, the LFO can also modulate the pitch or the VCO rectangle’s pulse width.
The ADSR-envelope allows modulation of the filter’s cutoff-frequency and the VCA-output, with positive or negative excursion. Selectively, the VCA can also be opened by a gate-trigger to free the envelope for exclusive filter use.
For integration into a modular system or use with an analogue sequencer, NANOZWERG offers several control inputs. There is CV/Gate for pitch control and note length as well as CV-inputs for cutoff-control, the VCA and LFO speed. The LFO also offers CV-output.
The audio-input allows signals to be fed into the VCF and VCA. NANOZWERG can be controlled by MIDI from any compatible keyboard or DAW. Note commands are received as well as pitch-wheel (+/- 2 semitones) and modulation-wheel data, the latter controlling the filter’s cutoff frequency.
MFB’s NANOZWERG has the following dimensions: 140 x 130 x 35 mm.External power supply included."
Testing the Roland AIRA TR-8 at a Shipping Dock at Night
Roland AIRA TR 8 demo + utwór "Od Nowa" (wokal i tekst: Wiola Kaźmierczak)
Published on Feb 19, 2014 E-MUZYK.pl·214 videos
"Krótka prezentacja podstawowych możliwości Roland AIRA TR-8 nagrana na pokładzie żaglowca 'Dar Pomorza' w Gdyni. W drugiej części prezentacji utwór 'Od Nowa', w którym wykorzystano Roland AIRA TR-8 i Roland AIRA TB-3 - wokal i tekst: Wiola Kaźmierczak."
Googlish: "A short presentation of the basic capabilities AIRA Roland TR-8 recorded on board the sailing ship 'Dar Pomerania' in Gdynia. During the second part of the presentation of the song 'From the New', which uses the Roland TR-8 AIRA and AIRA Roland TB-3 - vocals and text: Viola Kazmierczak. "
Published on Feb 19, 2014 E-MUZYK.pl·214 videos
"Krótka prezentacja podstawowych możliwości Roland AIRA TR-8 nagrana na pokładzie żaglowca 'Dar Pomorza' w Gdyni. W drugiej części prezentacji utwór 'Od Nowa', w którym wykorzystano Roland AIRA TR-8 i Roland AIRA TB-3 - wokal i tekst: Wiola Kaźmierczak."
Googlish: "A short presentation of the basic capabilities AIRA Roland TR-8 recorded on board the sailing ship 'Dar Pomerania' in Gdynia. During the second part of the presentation of the song 'From the New', which uses the Roland TR-8 AIRA and AIRA Roland TB-3 - vocals and text: Viola Kazmierczak. "
PEDRO ZOPELAR E PAULO BETO it's a rainy day sunshine girl
Published on Feb 19, 2014 Paulo Beto·179 videos
"Show aconteceu no Estúdio de Vidro Vila Madalena - São Paulo"
KORG MS20 & Moog Minimoog.
Greg Learns to Solder
Published on Feb 19, 2014 JamecoElectronics·43 videos
"Greg proves even a novice to the art of soldering electronics can complete a simple kit. With the right equipment and a few simple helpful tips, he builds a European siren with flashing light.
Soldering Kit w/ soldering iron: http://www.jameco.com/webapp/wcs/stor...
Euro siren kit: http://www.jameco.com/webapp/wcs/stor..."
KORG Volca Beats Snare Mod & More
Korg Volca Beats - Demonstration of my snare mod / hack !!
Published on Feb 15, 2014 Darren Glen·24 videos
"watch as I demonstrate a mod / hack I have discovered to make the Korg Vocal Beats snare sound more like an 808, without the rattly distortion that is currently in all units that many ppl report is the downfall of the unit. I myself was not impressed with the sound when I received it. I think either the engineers got a few values wrong or possibly the wrong value surface-mounted components were laid by the automated robot during manufacture. either way it just takes a few components in the right place to transform the snare and turn the Volca Beats into a far more realistic 808 beast!"
Korg Volca Beats Hack- Snare Mod Demo plus "how to" full instructions!!!
Published on Feb 18, 2014
"Here is the full video containing the demo of my finished mods to the Korg Volca Beats snare and hat, as well as full instructions on how to do the mod following afterwards! The mod makes for a much cleaner and useable snare than the distorted rubbish that the KVB is shipped with, and the addition of the triangle sound mod to the hats gives some nice variation to the unit as well. This is discussed further on the Gearslutz forum here: http://www.gearslutz.com/board/electr...
I hope you get this mod up and running yourself and the best of luck! it sure transforms the KVB into a more sophisticated beast."
Published on Feb 15, 2014 Darren Glen·24 videos
"watch as I demonstrate a mod / hack I have discovered to make the Korg Vocal Beats snare sound more like an 808, without the rattly distortion that is currently in all units that many ppl report is the downfall of the unit. I myself was not impressed with the sound when I received it. I think either the engineers got a few values wrong or possibly the wrong value surface-mounted components were laid by the automated robot during manufacture. either way it just takes a few components in the right place to transform the snare and turn the Volca Beats into a far more realistic 808 beast!"
Korg Volca Beats Hack- Snare Mod Demo plus "how to" full instructions!!!
Published on Feb 18, 2014
"Here is the full video containing the demo of my finished mods to the Korg Volca Beats snare and hat, as well as full instructions on how to do the mod following afterwards! The mod makes for a much cleaner and useable snare than the distorted rubbish that the KVB is shipped with, and the addition of the triangle sound mod to the hats gives some nice variation to the unit as well. This is discussed further on the Gearslutz forum here: http://www.gearslutz.com/board/electr...
I hope you get this mod up and running yourself and the best of luck! it sure transforms the KVB into a more sophisticated beast."
Moogfest teams up with Audiotool for a “Moogfest Audiotool Competition”
"Audiotool launches a Moogfest Competition for producers, winner gets to play at Moogfest and runners up get released on a compilation.
Los Angeles, CA, February 19, 2014: Starting today, Moogfest is inviting anyone to produce a track using the free cloudbased audio workstation Audiotool and submit it to the Moogfest Competition. The winner gets to play a set at Moogfest in Asheville, North Carolina, taking place from the 23rd to the 27th of April 2014. The winner will also, along with 7 runners up, have their tracks included on a limited edition release which will go out to the artists, VIPs and press who will be attending Moogfest.
Participants will have until the 25th of March to submit a track to the competition. A select panel including some of the Moogfest artists will then judge the tracks, with the the winner being announced on 1 April 2014.
Moogfest is the annual festival that celebrates the innovative spirit of founder Dr. Robert Moog, an American pioneer of electronic music and inventor of the Moog synthesizer. Emmy Parker, Brand Director at Moog Music Inc commented: “Moogfest represents the synthesis of technology, music and art. Audiotool's innovative platform empowers emerging artists to create on their own terms. We are excited to offer Audiotool's rich community of musicmakers an opportunity to be a part of Moogfest 2014.”
Since the 50s Moog Music has pioneered and developed devices that offer artists endless possibilities when it comes to creating sound. Audiotool, which started in 2008, brings together a range of retro and new school synthesizer emulations running in the browser, allowing collaboration and free access for anyone. The browserbased audio workstation is all about democratising the process of music creation and collaboration in the cloud. This partnership offers a unique opportunity to combine forces and to capitalize on the natural strengths and alignment of the two brands.
Audiotool inventor André Michelle said: “this partnership is huge for us and our users will be super excited about the chance of winning a set at Moogfest, for one just because of the incredible lineup. It’s also a unique opportunity for Audiotool users to have their music critiqued by some of the Moogfest artists."
Submission phase: 19 February 25 March
Winners announced: 1 April 2014
Grand Prize: Playing live set at Moogfest (flight, hotel and artist pass included)
1st 8th Place: Tracks will be on Moogfest 2014 compilation
More information on the contest and rules for entry can be found at: http://www.audiotool.com/contest/moogfest
####
About Audiotool
Audiotool is a cloudbased audio workstation that is all about the process of music creation in an open, inspiring and collaborative way. Audiotool launched in 2010 and has since gained over 500k users. It started as a TR909 emulation created by Andre Michelle in 2008, earning him the kudos for being one of the most innovative and capable Flash developers in the world. Andre Michelle was subsequently stalked by the idea that everyone should be able to make music through their browser. After 3 years of research and development this vision was fulfilled in the form of Audiotool. It has been awarded internationally for its design and rigorous development and has been praised by electronic music producers and the press: “You can really do everything that you would normally do in a realworld studio.” Richie Hawtin
About Moogfest
Since 2004, Moogfest has been a gathering for musicians that worked closely with Bob Moog and his instruments. In 2014, Moogfest is amplifying its vision and becoming a 5Day event dedicated to the synthesis of technology, art and music. Moogfest honors the inventiveness of Bob Moog and the legacy of the analog synth with an experimental line up of daytime conference programming and landmark nightly performances. Moogfest takes place April 2327th, 2014 in downtown Asheville, NC.
Some of this year’s lineup: Kraftwerk 3D: 3 Concerts, Pet Shop Boys, M.I.A, Flying Lotus, Dillon Francis, CHIC Feat. Nile Rodgers, Daedalus, YACHT.
About Moog Music
Moog Music is the world’s leading producer of analog synthesizers. The company and its customers carry on the legacy of its founder, electronic musical instrument pioneer, Dr. Bob Moog. The company hosts Moogfest, a fiveday festival celebrating the intersection of music and technology in honor of Moog's innovative spirit. All of Moog's instruments are hand built in its factory on the edge of downtown Asheville, NC. moogmusic.com
http://www.moogfest.com/
https://www.facebook.com/Moogfest
http://www.moogmusic.com/
Twitter: @moogmusicinc and @moogfest"
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
