MATRIXSYNTH

Arturia MicroBrute + Moog FreqBox - The FrankenSynth

Published on Nov 15, 2015 experimentalsynth

"Since they both have a healthy amount of Control Voltage connectivity, it is easy to use the oscillator in a Moog FreqBox as a 2nd oscillator on an Arturia MicroBrute. It is also possible to mute the MicroBrute oscillator and just use the FreqBox oscillator. Things really take off when the Freqbox effect and the sequencer are engaged. Learn more at www.experimentalsynth.com"

Warm by the Analog Fire (Drone/Sequence part 2)

Published on Nov 15, 2015 Rhythmicons

"This is an extension of the other drone I did earlier today but with numerous effects, stereo processing and sequencing.

Moslab Modular
Synthesizers.com sequencer
AKG BX-10 Reverb
Moog Bass Murf
Moog 104z Delay
Roland RE-301 Chorus Echo Tape Delay

So the output was split into a few signals, one going to the murf and the moog delay. The murf is going to the board and the delay is going to the board, panned left and right.
Another signal is going to the BX-10 which is going to the board panned to the center.
The third signal is going to the RE-301 where it is affected with chorus and echo. The Chorus output is going to the board, and the delay is going to the board both panned opposites.
Delay times are all set to different rates.
There is some droning to show the characteristic of the effects and some sequencing to showcase the delays. I think there were 5 channels of the moslab going back into the board."

KORG MINI POPS 7 Analog Rhythm Box 1971 | HD DEMO

Published on Nov 15, 2015 AnalogAudio1

"(c) 2015 by AnalogAudio1

The MINI POPS 7 is a non programmable analog rhythm box from Keio Electronics - the company which later became KORG. It came out 1971. All rhythms are mixable. It has a very characteristic, outstanding analog sound. It was used by J.M.Jarre, The Wings and some others.

I played the MP7 with a small amout of ambience from a Lexicon MPX-500. In the intro I played the MP7 through a EH Small Stone and a Korg SDD-3000 delay.

--------------------------------------------------------------------------------------------------

"KORG MINI POPS 7" SAMPLE PACK

Do you like the fat, analog drums of the Mini Pops 7? You can purchase it as "MP7 SAMPLE PACK" for 6,99 Euros. All drum sounds of the machine are included (16 bit / 44,1 kHz wav samples).

Recording was made in high quality using RME studio equipment. All original pure sound directly from the machine's output, without any treatments.

After payment through PayPal you will get the sample pack via email.

If you want to buy the sample pack, send a message to ceramic-man@gmx.de (and check your spam folder, I answer quickly)."

DPO + LxD meets Zdsp

Published on Nov 15, 2015 SunFallsMusic

"*Line Audio for that low end :)
Messing about with the new MakeNoise Music LxD aka "Low Strike Duo" module, it's buried in there under the cable madness.
TipTop Audio Circadian Rhythms (CR) at the helm. Only 2 sounds sources here.. and lots of modulation, but the heart of the patch is:
-MakeNoise DPO's Final and Saw patched into LxD's 2 inputs, which is being cv'd by Tides and CR triggering the Strike input.
-Blue Lantern Asteroid BDv4 as kick.
-Zdsp's on madFx"

Paia 2700/4700 Modular Synthesizer

Note: Auction links are affiliate links for which the site may be compensated.

via this auction

"This Paia modular synthesizer has 16 modules and a keyboard. It contains both 2700 and 4700 modules. Everything seems to be working well, but could use a good cleaning. It also comes with 8 voltage cables.

List of modules

2700
power supply
Voltage Controlled Oscillator
Function Generator
Control Oscillator
voltage control amplifier X2
bandpass filter X2
lowpass filter
inverted buffer

4700
4770 power X2
4740 Envelope Generator
4761 multiplier
4720 Voltage Controlled Oscillator
4710 Balanced Modulator"

CLICK FOR MORE »

#lsb_TV error instruments vs bastl instruments feat kasia justka, gijs gieskes & daniel katzenstab

New video added to this post.

Moog Mother-32 (x3), Octatrack, Blofeld, OP-1

Just trying out ideas for an upcoming performance; Moog Mother-32 (x3), Octatrack, Blofeld, OP-1

Published on Nov 15, 2015 Genshi Media Group

"This is just a really rough test; trying out ideas for my upcoming performance for the Volt Divers Experimental Electronic Music Collective. Just seeing what sounds go good together, how the sync works between the Octatrack and the Moog Mother-32s, etc. I am NOT at all happy with the way this came out, but I thought I'd put it here to compare with the actual performance which is in five days of this posting!"

Happy Nerding

Not a new module but I realize I never captured a proper image of it, nor the specs. Love the dual tuning knob.

via Happy Nerding:

"HM VCHM VCO_75O (Hearn Morley Voltage Controlled Oscillator) is an analog VCO made to give classic four waveforms (sawtooth, pulse, triangle and sine) in a narrow 6HP width. It features counting 10-turn “Tune” knob, where each turn corresponds to 1 octave of frequency range. Thus manual frequency sweep range is 10 octaves: staring from 16 Hz and up to 16 kHz, and this single “Tune” knob covers duties of the commonly used separate “Coarse” and “Fine” tune knobs. The saved panels space is then used by “FM” knob, which provides exponential Frequency Modulation, taking the Modulator’s signal from the corresponding “FM” jack. There is no linear FM present, because we highly recommend to use our FM AID module, which perfectly couples with HM VCO to give the user many different flavors of linear frequency/phase modulations. The “Tune” dial has a handy lock, so you can lock in the knob from accidental moves and keep the exact frequency setting unchanged.

There are also:
– standard “1V/oct” input jack for over than 7 octaves of perfect tracking;
– “Sync” input for hard syncing to the Master ocsillator;
– “PWM” input for Pulse Width Modulation.

SPECIFICATIONS

Tune: 16 Hz … 16 kHz

outputs level: -5 … 5 V

outputs impedance: 1 kOhm

module depth: 5 cm or 2 inches

power consumption: +46 mA / -46 mA at +/-12 Vdc

MSRP: 220 USD"

Retro Super Sawtor

Published on Nov 15, 2015 Happy Nerding

"Two Super Sawtors are used to play covers of 70's-80's hits.
BASS signal pass: HM VCO-Super Sawtor-MMM VCF-ADSR for filter and VCA.
LEAD signal pass: HM VCO-Super Sawtor-ADSR for VCA.
No external processing except of delay and reverb are used."