via this auction
Wednesday, July 20, 2016
YAMAHA CS20M
Roland SH-101 monophonic synthesizer
KORG Monopoly
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The following is a posting from the manufacturer site. ↓
While a monophonic synthesizer of 4VCO, 4 voice of the 44 key synthesizer that can be used also as a polyphonic synthesizer.
Four of the VCO, each of the pitch, waveform, octave, the level can be adjusted, the VCF equipped with a dedicated envelope generator, you can fine-grained sound making is.
In the key assign mode, sound and that has four times the thickness using four of VCO, 'Unison', and memory the chord structure in which suppressed, can play chords in one key, 'Chord Memory', It can be played also without losing the volume sense chord even a single note "Unison / share", can select one of four modes of "poly" which can be played as a four-voice polyphonic synth with one-touch.
In addition, with the revolutionary effects section it was not at the time of the synthesizer.
Umidaseru a unique tone effect synchro, such as the mounting cross-modulation, which can metallic sound-making, in the control wheel of the 2 groups for the bend and for the modulation, is possible to play expressive synth solo sound I can do it. Also equipped with arpeggiator."
via this auction
"The following is a posting from the manufacturer site. ↓While a monophonic synthesizer of 4VCO, 4 voice of the 44 key synthesizer that can be used also as a polyphonic synthesizer.
Four of the VCO, each of the pitch, waveform, octave, the level can be adjusted, the VCF equipped with a dedicated envelope generator, you can fine-grained sound making is.
In the key assign mode, sound and that has four times the thickness using four of VCO, 'Unison', and memory the chord structure in which suppressed, can play chords in one key, 'Chord Memory', It can be played also without losing the volume sense chord even a single note "Unison / share", can select one of four modes of "poly" which can be played as a four-voice polyphonic synth with one-touch.
In addition, with the revolutionary effects section it was not at the time of the synthesizer.
Umidaseru a unique tone effect synchro, such as the mounting cross-modulation, which can metallic sound-making, in the control wheel of the 2 groups for the bend and for the modulation, is possible to play expressive synth solo sound I can do it. Also equipped with arpeggiator."
Chimera Synthesis BC6 Walnut SN *8E1F3D*
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"For sale a very rare Synthesizer Chimera Synthesis BC6 Walnut synth / step recorder
"A brilliant compact synth / drone machine from the now deceased Chimera. Great for sampling :-)
This is what Chimera had to say about the BC6:
[BC6] WALNUT, handmade, small, standalone synthesizer with in-built 16-step sequence recorder
[DESIGN] Beautiful Black Walnut wood, brushed stainless steel, bright-red printed circuit board, green plastic button and green LED
[SOUND] Distilled Chimera bC8 type sounds
[USE] Live, backing, drone, musique-concrete, glitch, industrial…
CONTROLS:
[1] VCO pitch, from 27.5Hz [A0] to approximately 3.1KHz [G7]
[PLAYBACK] plays back the last sixteen notes, speed maybe smoothly varied from 1/16th speed to 16x speed
TECHNICAL:
[OUTPUT] Stereo 3.5mm jack socket (50mW available for driving headphones)
[POWER] 3x AAA cells, drain ~55mA, power switch on base
[SIZE] 90mm diameter x 45mm overall height (including knobs)
[CONSTRUCTION] body from black walnut, hand-finished and protected with Danish Oil, stainless steel top-plate, high quality double-sided
PCB hand-assembled and tested.
[AVAILABILITY] only 100 units were built (this is number 28)"
[2] LFO>VCO modulation depth, controls both AM and FM depths
[3] LFO rate (sub-sonic to audible)
[BUTTON] envelope trigger (with sustain), mode selection and playback start-stop
[4] Envelope, combination attack/release control 5 milliseconds to 20 seconds
[5] VCO waveshape continuous morph (sine, triangle, square, sawtooth) and LFO waveshape selection (sine, square, rising sawtooth, falling sawtooth)
[6] Volume [also auxiliary functions of mode selection when at zero and playback speed]
[MODE] single-shot mode with sustain, auto-repeat, playback
[RECORDER] automatically records the last sixteen notes played including, note duration, time between notes and the values of knobs 1-5 (these maybe overridden during playback if desired)"
via this auction
"For sale a very rare Synthesizer Chimera Synthesis BC6 Walnut synth / step recorder"A brilliant compact synth / drone machine from the now deceased Chimera. Great for sampling :-)
This is what Chimera had to say about the BC6:
[BC6] WALNUT, handmade, small, standalone synthesizer with in-built 16-step sequence recorder
[DESIGN] Beautiful Black Walnut wood, brushed stainless steel, bright-red printed circuit board, green plastic button and green LED
[SOUND] Distilled Chimera bC8 type sounds
[USE] Live, backing, drone, musique-concrete, glitch, industrial…
CONTROLS:
[1] VCO pitch, from 27.5Hz [A0] to approximately 3.1KHz [G7]
[PLAYBACK] plays back the last sixteen notes, speed maybe smoothly varied from 1/16th speed to 16x speed
TECHNICAL:
[OUTPUT] Stereo 3.5mm jack socket (50mW available for driving headphones)
[POWER] 3x AAA cells, drain ~55mA, power switch on base
[SIZE] 90mm diameter x 45mm overall height (including knobs)
[CONSTRUCTION] body from black walnut, hand-finished and protected with Danish Oil, stainless steel top-plate, high quality double-sided
PCB hand-assembled and tested.
[AVAILABILITY] only 100 units were built (this is number 28)"
[2] LFO>VCO modulation depth, controls both AM and FM depths
[3] LFO rate (sub-sonic to audible)
[BUTTON] envelope trigger (with sustain), mode selection and playback start-stop
[4] Envelope, combination attack/release control 5 milliseconds to 20 seconds
[5] VCO waveshape continuous morph (sine, triangle, square, sawtooth) and LFO waveshape selection (sine, square, rising sawtooth, falling sawtooth)
[6] Volume [also auxiliary functions of mode selection when at zero and playback speed]
[MODE] single-shot mode with sustain, auto-repeat, playback
[RECORDER] automatically records the last sixteen notes played including, note duration, time between notes and the values of knobs 1-5 (these maybe overridden during playback if desired)"
Lion & Fox Recording Vintage 80s Linn Drum LM2
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"This one was on the shelf in the main room at Lion & Fox Recording in the 80s and 90s. Probably shows up on a number of classic Reggae recordings RAS Records did there during that era."
via this auction
"This one was on the shelf in the main room at Lion & Fox Recording in the 80s and 90s. Probably shows up on a number of classic Reggae recordings RAS Records did there during that era."
BUCHLA LEM SPIDER
Buchla 200e System 1
Note: links to listings are affiliate links for which the site may be compensated.
via this auction
"The 225, 281 and 292 are all three months old and in mint condition.
The 261e and boat are about 4-5 years old and work perfectly and in great shape. The 261 has two small dents shown in pic and is non- stiff pot version."
via this auction
"The 225, 281 and 292 are all three months old and in mint condition.
The 261e and boat are about 4-5 years old and work perfectly and in great shape. The 261 has two small dents shown in pic and is non- stiff pot version."
Live Acid Electronica - "Low"- TR8, TB3, System 1, MX1, Volca Bass, Electribe 2, Ableton Push
Published on Jul 19, 2016 Rezzonator
"Another track taken from my forthcoming album performed live. For this one I am using a combination of hardware and software. I am sequencing the TR8, TB3, and Korg Volcas from Ableton and launching the midi clips from Push as I perform. This gives me the ability to have longer sequences without the restrictions of 1 bar patterns on the hardware. I can also use Live's internal fx.
Equipment used...
Ableton Live
Ableton Push
Aira TR-8, TB-3, MX-1, System 1
Korg Volca Bass
Korg Electribe 2
Yamaha TMX7 drum module
iPad running Rebirth app for second TB303 sound"
Spotted on discchord.
Live Acid Electronica - "VorteX"- Roland TR8, TB3, System 1, MX1, Volca Bass
Published on Jun 17, 2016
"Live performance of a new track called VorteX which will appear on my forthcoming new album. This is basically all hardware performed using the Roland TR-8, TB-3, System 1 and MX-1 along with Korg Volca Bass and Korg Electribe 2. I am using Ableton Push with Live just to trigger the sound fx and risers etc - all the song parts are coming from the hardware.
What you are hearing is the raw recorded audio - no extra mixing or processing.
The M-Audio Trigger Finger Pro is the master midi clock source.
www.rezzonator.co.uk"
Kawai K5000W Synthesizer Factory Demo Songs
Note: links to listings are affiliate links for which the site may be compensated.
Published on Jul 19, 2016 Sound Programming
"Factory demo songs from the Kawai K5000W, an additive synthesizer from 1997.
Song list:
1. BADD (0:00)
2. ADDITUDE (2:46)
3. SCORE (5:19)
4. WARP5000 (6:46)
5. WELC5000 (9:15)
The K5000W is a hybrid synthesizer in that it combines both additive synthesis and waveform-based subtractive synthesis in the same engine. There are two other versions in the series: the K5000S, which trades the General MIDI wave ROM for real-time control knobs, and the K5000R, a rackmount version. The K5000 series builds on the basic additive synthesis that was in the earlier Kawai K5 synthesizer, but adds a lot more control, more effects, and greater capabilities all around.
This video has been edited to skip the file loading process. Each song takes about 15-20 seconds to load from the demo floppy disk before play begins."
Published on Jul 19, 2016 Sound Programming
"Factory demo songs from the Kawai K5000W, an additive synthesizer from 1997.
Song list:
1. BADD (0:00)
2. ADDITUDE (2:46)
3. SCORE (5:19)
4. WARP5000 (6:46)
5. WELC5000 (9:15)
The K5000W is a hybrid synthesizer in that it combines both additive synthesis and waveform-based subtractive synthesis in the same engine. There are two other versions in the series: the K5000S, which trades the General MIDI wave ROM for real-time control knobs, and the K5000R, a rackmount version. The K5000 series builds on the basic additive synthesis that was in the earlier Kawai K5 synthesizer, but adds a lot more control, more effects, and greater capabilities all around.
This video has been edited to skip the file loading process. Each song takes about 15-20 seconds to load from the demo floppy disk before play begins."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
