Roland Jupiter-4 Through Nux Mod Core Pedals

Published on Nov 11, 2016 umusic6

Playlist:

1. Nux Mod Core - Flanger with Synth (Jupiter 4)

"Since there don't seem to be many demos on youtube showing the use of FX (Guitar) pedals in combination with syths, here is a small demo of the excellent Nux Mod Core in Flanger mode processing the raw output of my JP-4. No other FX involved (the Time Cores Mix dial is down, also.) Enjoy!"

2. Nux Mod Core - Phaser with Synth (Jupiter 4)

"Demo of the Nux Mod Core processing Jupiter 4 raw sound. Also with some usage of its orange brother, the Time Core."

3. Nux Time Core with Synth (Jupiter 4)

"Checking out the algorithms of the Nux Time Core with some raw sound from my Jupiter 4. No other FX involved. Check out my other videos for Nuc Mod Core."

Sunday morning synth jam (Sixtrak, JX3p, Microcon II, Airbase 99, RS7000)

Published on Nov 29, 2015 umusic6

"Quick jam on sunday morning. Arranged live on RS7000. Sounds from Sixtrak, JXp3, Microcon ii, drums from Airbase 99"

Fun with the Roland Jupiter 4

Published on Aug 25, 2016 umusic6

"Jamming with my Roland Jupiter 4.
Voices a bit out of tune, some sliders crackling a bit.
Up to 1:22 Single Osc, Dry
1:52, added Sub Osc onboard Ensemble FX
2:49 added Reverb from Lexicon Alex
3:15 added Delay from Boss BE-5
8:25 Arpeggiator fun"

Sequential Circuits Sixtrak OS V14 - LFO Sync &

Published on Jul 1, 2016 umusic6

"This video demonstrates the new feature of
LFO Sync to note trigger in the v14 Firmware created by Bob Grieb. The binary image of the firmware is available on his site http://tauntek.com/SixTrackBug.htm
The LFO Sync can be set by a new parameter (#37) with values 0 for sync off and 1 or 2 (inverse) for sync on.
The controller in used in the video is the Six-Tweak available at stereoping.com"

Sequential Circuits Sixtrak OS V14 - Unison Detune

Published on Jul 1, 2016 umusic6

"This video demonstrates the new feature of Unison Detune in the v14 Firmware created by Bob Grieb."

Stereoping Sixtweak Synth Controller for Sequential Circuits Sixtrak in Action

Published on Nov 14, 2015 umusic6

"Session to demonstrate the basic features of the Sixtweak synth controller from stereoping.com.
Tweaking sequences arranged on yamaha rs 7000 sequencer.
Supported by jomox airbase 99 and roland jx 3p."

Troublemaker - TB-303 for iOS Teaser Video

Published on Jan 3, 2017 Bram Bos

"COMING SOON: Troublemaker for iOS
- AUv3 plugin
- Ableton Lync
- Audiobus
- MIDI / MIDI CC / Bluetooth MIDI input
- Standalone sequencer with MID and WAV export"

Praise for Synth Tech Mike Metz of Thesis Audio

This one in via MATRIXSYNTH reader Neil Hetrick:

"This posting is a sort-of combination THANK YOU and glowing review for expert synth technician Mike Metz of Thesis Audio Service (Wichita, KS). Mike recently refurbished my prized Roland JUPITER-6 synth, giving it a total overhaul so that it would be in top shape for the next couple decades or more.

I'm lucky to own a near-mint-condition JP-6, and Mike is far and away the most careful synthesizer tech I've ever found, handling every repair & restoration project with the utmost precision, care & expertise. I don't doubt that he could take on just about any project out there and come out with top-flight results (just check his page on vintage synth restorations for the proof). So I knew my instrument would be in the most capable hands when I shipped it off (providing FedEx could get it there and back without damage... I constructed a HUGE box just for the purpose, and even took out an insurance policy, just in case...).

Here's a quick rundown of the work Mike performed to bring my synth back up to top condition:
Cleaned chassis & all PC boards
Replaced 2-voice card main VCA chip (CEM3360)
Repaired solder connections for arpeggiator section LEDs
Replaced all main power supply capacitors
Cleaned all main & mod-panel controls & switches, lubricated all sliders, replaced slider dust felts
Replaced back-up battery w/ socket
Cleaned all rear panel jacks
Complete checkout

THANKS again to Mike Metz @ Thesis Audio !!"

CLICK FOR MORE »

unbox Moog Minimoog Model D Reissue

Published on Jan 3, 2017 triumphthruxton

"unbox Moog Minimoog Model D Reissue, Stockholm Sweden"

2 x Rhodes Chroma Analog Poly Synths with CC+ MIDI & Extras

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"The Chroma is a rare thing, a 35 year old analog synth thats still supported by the original engineer and a group of dedicated Chroma fans. There is a very active Chroma group managed via www.rhodeschroma.com with a lot of interesting discussion and activity.

Chroma 1 is fully functional, new PSU and CC+ upgrade installed latest CC+ OS ROM installed V2.18. Complete with pedals and MIDI interface.

Chroma 2 is not functional. Has a new PSU and CC+ upgrade already installed but needs CMOS chips replaced on voice and controller boards and a good calibration. There is a CC+ OS ROM v2.18 included but not installed. There is also a spare v2.14 ROM from Chroma 1.

Included in this package are 2 sets of footpedals, 2 CC+ MIDI interfaces, a Behrringer BCR2000 with 2 Chromatrol adhesive overlays. There is a sysex avail;abe file to set up the BCR2000 which will operate as a dedicated programmer. I had intended to use two BCR's one for each layer, but didn't get around to purchasing the 2nd BCR, hence the two overlays. You can use one BCR for both layers, switching between via a dedicated switch. There are also two component complete Chroma voice cards and these need calibrating."

CLICK FOR MORE »

Korg MonoPoly SN 378698 with MIDI, Original Box & Sound Chart Overlay

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Up for sale is our superb Korg MonoPoly Analogue synthesiser fitted with the excellent Midipoly midi system and complete with its original Korg MonoPoly box."

CLICK FOR MORE »