Doepfer Dark Link USB or MIDI to CV GATE Interface

Note: links to listings are affiliate links for which the site may be compensated.

via this auction

"Doepfer Dark Link USB or MIDI to CV GATE interface that converts CV Gate signal from a old analog synth or other vintage equipment that uses CV GATE to MIDI signal thru a MIDI cable or usb cable to a controller or computer.

Very cool little interface that allows you to control your old analog synths or drum machines thru midi on your computer or other controller.

It even has a glide knob to add some glide to those midi parts.

This Dark Link is like new, I bought it and used it a few times, sold my analog synth that had CV Gate output so I do not need it anymore.

No power supply included, it requires 12V AC 200mA."

CLICK FOR MORE »

Virus TI: Dream State Vol.1

AiynZahevSounds
Published on Aug 13, 2017

https://www.aiynzahev-sounds.com/prod...

"After a long time in the making, I'm happy to present Dream State Vol.1 for the Virus TI.

Suitable for Virus TI, TI2 and Snow models, this bank delivers a variety of carefully made sounds that deliver punch, clarity and fullness of sound. Sounds included range from cinematic pads to classic supersaw spreads, and punchy basses & leads for modern dance music are well represented. Finally a selection of plucks and arpeggio/sequences will help you lay down synth rhythms.

This 64 sound bank makes good use of the 3 easy controls and modwheel for expressive phrases, and all the sounds are programmed with category filters.

64 carefully made sounds
Modwheel and the three soft knob assignments
Categorized
MIDI from the demo included (31 parts)"

Grp Synthesizer 24 dB Low Pass Filter

AudioCentralMagazine
Published on Aug 13, 2017

"The Grp Synthesizer 24 dB Low Pass Filter Euro Rack. 00.31 = Cutoff & Resonance 01.02 pole select 02.34 distortion 03.09 envelope & lfo modulation 04.41 resonance cv modulation with lfo 06.07 audio rate frequency modulation from vco sine wave."

Mother of the Minilogue | Welcome to the Future - Minilogue and Moog Mother 32 jam

Wingo Shackleford
Published on Jan 24, 2016

"Weird ambient jam with the Moog Mother 32 and the Korg Miniloque and some far out pedals."

Welcome to the Future - Minilogue and Moog Mother 32 jam

Wingo Shackleford
Published on Jan 23, 2016

"Korg Minilogue meets the Moog Mother 32"

Flux Cluster: 2 x Moog Mother 32 and an MF-108M "ClusterFlux" pedal

Wingo Shackleford
Published on Aug 14, 2016

"Test jam with 2 Moog Mother 32s and a Moog Moogerfooger MF-108M, Moog MF Drive, and Earthquaker Afterneath pedal. Lots of CV flying around between the two Mothers and the MF-108M, and lots of pure, lush analog distortion. Recorded in Ableton Live, with no other FX added."

Digitana SX-1

Digitana SX-1 from Bendt Med D on Vimeo.

"Alina Kalancea live in Ancona, Italy."

A Hordijk Minute vi & vii

Todd Barton
Published on Aug 13, 2017

"note: Osc Sync switch is set to 'tune' -- explore different settings here and elsewhere on both modules."

All parts here.

Korg Minilogue - FIRST 5 MINUTES With Dan Haigh

Dan Haigh
Published on Aug 13, 2017

"KORG sent me this super sexy Minilogue. It sounds fantastic, its feature rich and its insanely affordable. I've had a lot of fun with it and will be adding it to my main go to synths for sure. If you like this music check out my band GUNSHIP: www.youtube.com/user/GUNSHIPMUSIC"

Befaco DIY Synthesizer Jam With an Arturia Beatstep Pro

LOOK MUM NO COMPUTER
Published on Aug 13, 2017

"Befaco Jumpskiff, rampage and even VCO.
This is the last part of the Befaco Mini series. Check part 1 and 2 over here [posted here], Where i build a Befaco Jumpskiff and a Befaco Rampage.

You might have noticed a lack of Outrageous Machines Recently. well thats because im currently working on some of my largest most ambitious projects to date. i cant wait to share them with you! So hold on tight. because they are going to blow Itll kill you 5000 and synth bike out of the WATERRRR."

mxctr - Oberheim Matrix-1000/6R Controller Firmware Update

BIM0X
Published on Aug 13, 2017

"In the video, the Roland TR8 rim shot midi note triggers the arp and seq."

"Firmware update 1.00

Alpes Machines is back from holidays.

It was the occasion to enhance firmware drastically : the library used to save the 1000 patches into eeprom 24LC512 has been optimized to get the lowest possible latency. Now the Ctrlr can directly receive patches from Oberheim Matrix synths, without the use of a first party software ! Bye bye computer 😉

The architecture has been rewrote to correctly control 4 synths at the same time, and switching on the fly between the 4 different synths. It was a big challenge as the free RAM is very low !

Regarding the Arpeggiator : it can now be sync to internal tempo generator or external midi clock (as before), but now you can also control it with a typical sync24 signal or a trigger signal like the drum machines from the 80s. Moreover, inspired by the trigger technique, you can control the arp and seq with a midi note trigger. In the video below, the Roland TR8 rim shot midi note triggers the arp and seq."