Sunday, August 18, 2024
Note to Be - AUv3 MIDI Quantizer & More
video upload by Cem Olcay
"Note to Be – more than just a simple MIDI quantizer. Select your notes one by one, trigger them with MIDI CC, and control multiple synths simultaneously. Select a scale or pick the notes you want individually on the main UI. It will quantize incoming MIDI notes and CCs to the nearest selected note. With the CC quantization you can play it with hardware controller knobs or MIDI LFO apps and create chords, or interesting patterns. Out now for iOS and Apple Silicon."
https://apps.apple.com/us/app/note-to...
http://keybudapp.com/notetobe
Note to Be - MIDI Quantizer iOS App
video upload by Cem Olcay
One-of-a-Kind Mechanical and Doepfer Based Eurorack Sequencer
Note: links to listings are affiliate links for which the site may be compensated.
video uploads by Temporary lines
Note the sequencer is listed for sale below with full details. Use the player controls above to skip through videos.
First video:
Patching my picture reader into my eurorack system
Moog grandmother for bass
Moog dfam for percussion and noises
Tiptop 909 kick, clap, cymbals, hats, one
Polyvoks vcfs
Serge 1973 vcf pinging
via this listing
"A one of a kind Eurorack sequencer and case ( 3 x 126HP).
This case was painstainkling crafted from aluminium extrusuions and 6mm hoop pine plywood. It has removable aluminium legs at the rear that posistion the case on an ergonomic angle.
Inside the bottom of the case the 'clock' is mounted. The clock consists of a geared stepper motor 5:1 driving an aluminium arm with magnets. These activate reed switched on the four different time tracks on the custom made circuit board, 4/4,5/4,6/4,7/4, over 8 bars. The stepper motor is driven by a stepper motor controller, this is connected to a panel installed in the lower left position of the eurorack. This panel has an input 2.1mm barrel socket for a 12V (1A Min) supply, a enable switch, a pulse switch and a direction switch, there is a 3.5mm socket for the input pulse from the oscillator; (the frequency division of the oscillator can be adjusted by dip switches on the stepper motor controller). The oscilator I used was a Doepfer A-145-1 LFO set to High range.
The time signatures are then available over 14 'channels' to have each step turned on or off by the array of miniture toggle switch on the control panel over the 8 bars. The ouputs of each channel are available on 3.5mm sockets on the output panel mounted center-top on the eurorack rails. This panel also features the following outputs - 1 every 8 Bars, Kick drum 4/4, Off beat, 2,4 and 2,3,4 on 4/4 time. Also direct outputs for each time signature.
The case also comes with a custion beat counter module, this displays the BPM in binary.
A selection of spare parts is provided, including - a stepper motor and gearbox (high precision) reed switches, toggle switches, diodes.
Note - this device best suits those with some electronic skills as this device will likely need servicing at some stage. Also it my require trouble shooting should it become damaged during transportation. It will be well packed and marked fragile. The damage will like be a solder joint becoming faulty it the device is bashed about. The circuits are very simple and easy to trace. The 'clock' board is mounted to the botem panel that can be 'quickly' removed from the bottom of the case via wingnuts."
video uploads by Temporary lines
Note the sequencer is listed for sale below with full details. Use the player controls above to skip through videos.
First video:
Patching my picture reader into my eurorack system
Moog grandmother for bass
Moog dfam for percussion and noises
Tiptop 909 kick, clap, cymbals, hats, one
Polyvoks vcfs
Serge 1973 vcf pinging
via this listing
"A one of a kind Eurorack sequencer and case ( 3 x 126HP).This case was painstainkling crafted from aluminium extrusuions and 6mm hoop pine plywood. It has removable aluminium legs at the rear that posistion the case on an ergonomic angle.
Inside the bottom of the case the 'clock' is mounted. The clock consists of a geared stepper motor 5:1 driving an aluminium arm with magnets. These activate reed switched on the four different time tracks on the custom made circuit board, 4/4,5/4,6/4,7/4, over 8 bars. The stepper motor is driven by a stepper motor controller, this is connected to a panel installed in the lower left position of the eurorack. This panel has an input 2.1mm barrel socket for a 12V (1A Min) supply, a enable switch, a pulse switch and a direction switch, there is a 3.5mm socket for the input pulse from the oscillator; (the frequency division of the oscillator can be adjusted by dip switches on the stepper motor controller). The oscilator I used was a Doepfer A-145-1 LFO set to High range.
The time signatures are then available over 14 'channels' to have each step turned on or off by the array of miniture toggle switch on the control panel over the 8 bars. The ouputs of each channel are available on 3.5mm sockets on the output panel mounted center-top on the eurorack rails. This panel also features the following outputs - 1 every 8 Bars, Kick drum 4/4, Off beat, 2,4 and 2,3,4 on 4/4 time. Also direct outputs for each time signature.
The case also comes with a custion beat counter module, this displays the BPM in binary.
A selection of spare parts is provided, including - a stepper motor and gearbox (high precision) reed switches, toggle switches, diodes.
Note - this device best suits those with some electronic skills as this device will likely need servicing at some stage. Also it my require trouble shooting should it become damaged during transportation. It will be well packed and marked fragile. The damage will like be a solder joint becoming faulty it the device is bashed about. The circuits are very simple and easy to trace. The 'clock' board is mounted to the botem panel that can be 'quickly' removed from the bottom of the case via wingnuts."
Roland SH-1000 37-Key Synthesizer w/ Case
Note: links to listings are affiliate links for which the site may be compensated.
via this listing
"Roland SH-1000 analog synthesizer from the early/mid 70's! It is the cleanest example I've ever seen with barely a mark on it. Of course if you look close enough, there's signs of it being 50 years old but everything works great. All the organ flip switches work and are original/intact. The synth has recently been recapped and cleaned out by a tech here in Montreal to ensure perfect function for years to come. The only thing is the power switch lost function in part of the switch so it has been wired backwards to keep originality and function. Comes with the original hard case (missing one latch) which fits the synthesizer perfectly."
via this listing
"Roland SH-1000 analog synthesizer from the early/mid 70's! It is the cleanest example I've ever seen with barely a mark on it. Of course if you look close enough, there's signs of it being 50 years old but everything works great. All the organ flip switches work and are original/intact. The synth has recently been recapped and cleaned out by a tech here in Montreal to ensure perfect function for years to come. The only thing is the power switch lost function in part of the switch so it has been wired backwards to keep originality and function. Comes with the original hard case (missing one latch) which fits the synthesizer perfectly."
Roland Integra-7 Supernatural Sound Module in Gator Rack Case w/ PS4x4 PROUSB Power Conditioner
Roland XV-5050 SN ZP31326
Note: links to listings are affiliate links for which the site may be compensated.
via this listing
Additional SYNTH CITY Listings
"A Roland XV-5050- a great way to explore the sound selection from the Roland XV lineup. This unit has some light rack rash on the top and bottom of the unit, but the rest of the unit is in great nick. This synth has expansion card slots at the top. This synth does not have any expansion cards populating those top slots."
via this listing
Additional SYNTH CITY Listings
"A Roland XV-5050- a great way to explore the sound selection from the Roland XV lineup. This unit has some light rack rash on the top and bottom of the unit, but the rest of the unit is in great nick. This synth has expansion card slots at the top. This synth does not have any expansion cards populating those top slots."
E-MU Systems Vintage Keys
Note: links to listings are affiliate links for which the site may be compensated.
via this listing
Additional SYNTH CITY Listings
via this listing
Additional SYNTH CITY Listings
Sequential Trigon-6 Desktop 6-Voice Polyphonic Synthesizer with Cover
Forat Modded Linn LinnDrum LM2
Note: links to listings are affiliate links for which the site may be compensated.
via this listing
"The LinnDrum, a classic drum machine synonymous with the iconic sounds of the 1980s, has been meticulously upgraded with the Forat's specialty modifications for the Linn Drum. This enhancement retains the vintage analog charm of the original LinnDrum while introducing a range of modern features that cater to contemporary music production needs.
Key Forat Upgrade Features:
Enhanced Sound Palette: The Forat mod extends the LinnDrum's sound capabilities, allowing for a broader range of samples and a more diverse tonal spectrum. This modification includes new drum sounds and improved sampling quality, ensuring your beats sound fuller and more dynamic.
MIDI Integration: The Forat upgrade introduces advanced MIDI functionality, providing seamless integration with modern studio setups. This enhancement allows for precise control over the LinnDrum's sounds and patterns from any external MIDI controller or DAW.
Conclusion: The LinnDrum with Forat F9000 modification is a must-have for producers who appreciate the vintage character of the original LinnDrum but need the versatility and power required for today's music production. This upgraded machine combines the best of both worlds, offering timeless sounds with cutting-edge features."
via this listing
"The LinnDrum, a classic drum machine synonymous with the iconic sounds of the 1980s, has been meticulously upgraded with the Forat's specialty modifications for the Linn Drum. This enhancement retains the vintage analog charm of the original LinnDrum while introducing a range of modern features that cater to contemporary music production needs.Key Forat Upgrade Features:
Enhanced Sound Palette: The Forat mod extends the LinnDrum's sound capabilities, allowing for a broader range of samples and a more diverse tonal spectrum. This modification includes new drum sounds and improved sampling quality, ensuring your beats sound fuller and more dynamic.
MIDI Integration: The Forat upgrade introduces advanced MIDI functionality, providing seamless integration with modern studio setups. This enhancement allows for precise control over the LinnDrum's sounds and patterns from any external MIDI controller or DAW.
Conclusion: The LinnDrum with Forat F9000 modification is a must-have for producers who appreciate the vintage character of the original LinnDrum but need the versatility and power required for today's music production. This upgraded machine combines the best of both worlds, offering timeless sounds with cutting-edge features."
Sequential Circuits DrumTraks 12-Voice Drum Machine w/ Original Manual
The Ohmforce Ohmicide Eurorack Module Is Not Playing Around
video upload by Matt Lowery
"Let's spend some time getting to know Ohmforce's exceptional port of the Ohmicide plugin to eurorack land. Ohmicide is a collection of perfectly curated distortion algorithms that sounds great and is easy to use."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
