video upload by temaniak - click CC for subtitles once the video begins.
0:24 Интро - Intro
1:12 Контроль - Controls
3:27 Волны - Waves
5:40 VCA и морфинг - VCA and Morphing
11:55 Сабосциллятор и Гармоники - Sub-oscillator and Harmonics
14:53 FM
22:13 Патч A (YAY) - Patch A (YAY)
23:58 Патч B (Sync) - Patch B (Sync)
25:56 Патч C (Selfpatching) - Patch C (Self-patching)
31:16 Комплексный патч А (Drone) - Complex Patch A (Drone)
34:58 Комплексный патч B (Мелодичный) - Complex Patch B (Melodic)
40:01 Аутро - Outro
Tri-core VCO with wave morph, TZ FM and buit in VCA's
Twang Modular Wave Generator is a fully analog triangle core VCO with great set of features:
– wave output with contintious morph between sine, triangle, upsaw and pulse waves. – voltage controlled morph with bipolar attenuator. – wave output has built in VCA, alowing to control the level and amplitude modulation. – Roland SH-101 style square sub oscillator. – even and odd harmonics outputs. – FM in with amount control VCA and switch between exponential and through-zero. – pulse width modulation which also change the phase of upsaw wave. – sync input.
video upload by temaniak - click CC for subtitles once the video begins.
"Resonator Filter Equalizer Eurorack module."
Equalizer/resonator/triple filter
There are a lot of ways to use RFE. Besides EQ and triple multymode filter, it can be a powerful sound source with FM posibilities. Use it like drone machine or triple VCO (it tracks about 4-5 octaves) or even a drum machine, it pings very well!
3 parametric sections with cv control of frequency, bandwidth and level;
3 analog filters with mode switch and mute push button;
simultaneous VCF sum and EQ outputs;
voltage control feedback.
video upload by temaniak - click CC for subtitles once the video begins.
"Универсальный аудио - CV стерео-процессор от Twang."
"A versatile stereo audio-to-CV processor from Twang."
Crossfader/Polarizer/Panner with a twist.
CPP is a powerful processor for audio, but it also can be used with CV signals. It’s a great tool to work with a stereo field particulary and with a sound design in general. It can be a multitrack bus or individual panner. For small systems it can be end-of-chain mixing tool with vc crossfaders, vc panners and VCA’s.
The module consists of 4 sections: 2xCPP, Mid/Side, 2xVCA. The first two channels are identical and the module is named after them. We have two signal inputs going to the crossfader, controlled with the knob and cv input. Additionally, there is a handy attenuverter to make cv control easier. After crossfader the signal goes to polarizer, which is actually a bipolar VCA and can be used as classic amplifier, ring modulator or inverter. It can be bypassed symply by routing the signal with switch directly to panner, then it can work independently. There is a dedicated input C for it. Thus we can get 3 input mixer inside one channel. In addition, it has 5V offset switch wich can be useful while processing a cv signals. The final stage is panner. It also has cv input and send our signal to sum in stereo.
The second channel is identical to the first one.
The third section is a “secret weapon” of stereo sound design – Mid/side encoder-decoder. L and R inputs are transforming to Mid and Side signals and then can be transformed to wide stereo field. There is no knobs to control this, but there a lot of ways to use it with other on board sections or with other VCA, VCF or FX modules.
The last fourth channel is a pair of VCA’s. There is a signal input, cv input and signal output. Both are the same and have level control knobs.
Finally, all input signals are summing to master output with deficated level control knob. If we use a channel’s individual output, it will be subtracted from the main mix.
Timeline:
Introduction — 0:00
Functions Demo — 0:56
Sample Stereo Movement — 6:42
One Shaper For Two Voices — 7:21
Trigonometry On Drums — 10:18
Two Simple Voices — 12:23
Stereo Distortion & Textures — 14:07
Folded Sine Bass — 15:08
Trigonometry On Drums 2 — 17:41
Heavy Atmospheric Distortion — 19:37
One More Jam Session — 21:05
Drone Rhythmic Shaping — 23:51
Before Void Trigonometry. Обзор.
video upload by temaniak - Click CC at the bottom of the player once started for subtitles.
Gilbert-Style sine shaper
Unique multi-output Gilbert-style sine shaper. The shaper offers wave shaping, distortion, folding, phase modulation including through-zero, and imitation stereo. These effects take the sound into West Coast territory.
Shaper shematic from NCS MSK-13 project.
A deep dive into chaotic synthesis using the Before Void Benjolin X as the only one sound source.
All effects are generated within the Eurorack case:
Before Void Trigonometry (Wave Shaper), Shift Line Astronaut (Reverb), Catoff 100FX (Reverb/Delay)
What you hear is the raw character of these modules. Post-processing is limited to mixing and compression only. No external EQ or VST plugins."
Before Void Benjolin X || First Jam
video upload by bajjjan records
"First Jam with Before Void Benjolin X and Roland TR09"
"Based on forestcover Benjolin
+clock rungler input (any signal such as puls, trigs, gates, clock)
+band pass filter output
+high pass filter output (capricious output, starts cutting low frequencies only when the resonance is raised from 30%)
Timeline:
Introduction — 0:00
Functions Demo — 0:56
Sample Stereo Movement — 6:42
One Shaper For Two Voices — 7:21
Trigonometry On Drums — 10:18
Two Simple Voices — 12:23
Stereo Distortion & Textures — 14:07
Folded Sine Bass — 15:08
Trigonometry On Drums 2 — 17:41
Heavy Atmospheric Distortion — 19:37
One More Jam Session — 21:05
Drone Rhythmic Shaping — 23:51
"Unique multi-output Gilbert-style sine shaper. The shaper offers wave shaping, distortion, folding, phase modulation including through-zero, and imitation stereo. These effects take the sound into West Coast territory.
Shaper shematic from NCS MSK-13 project."
"The With Mixer is a companion expander for the ALM Stem Ripper, adding a full-featured 8-channel stereo mixer with per-channel level and gain control, stereo panning, dual stereo aux sends, and mute and solo controls.
An easy-to-use graphical interface provides visual monitoring of all eight input channels and the stereo mix output, along with quick, precise control of all mix parameters. Mix parameters can also be controlled via CV or an external MIDI controller connected to the powered USB host port, providing hands-on control and making the With Mixer well suited to live performance. Complete mixer setups can be saved and recalled, while the display also shows the Stem Ripper's recording status and elapsed time. Together, the 'Stem Ripper With Mixer' pair provides a modern multitrack stereo digital mixing and recording setup to your Eurorack system in just 14HP."
Chapters:
0:00 - Intro
0:53 - Mix Setup
1:35 - Channel Parameters
4:07 - Aux Send 1 and 2
6:34 - CV Inputs
7:22 - CV Attenuation and Offset
7:57 - MIDI Controller Setup
10:52 - Global Mix Setting
11:26 - Outro
Capture and control your Eurorack mix like never before with the With Mixer from ALM Busy Circuits, a feature-packed expander for the ALM Stem Ripper that turns the recorder into a robust mixing set-up. While Stem Ripper offers a powerful, high-fidelity way to record multitrack audio in a Eurorack system, the With Mixer takes this functionality even further, incorporating all eight channels of Stem Ripper into a sleek and slim digital mixer for studio tracking and performance control alike. For each channel, the With Mixer enables level and gain control, stereo panning, two sets of stereo auxiliary sends for incorporating effects, as well as mute and solo controls. This vast feature set is available to any sized system, thanks to the incredibly hp-efficient 14hp space required by the full two module set-up. This compact size far outpaces the specs of virtually any other mixer in Eurorack, all while still being a multitrack recorder!
Adjust settings and keep an eye on both levels and recording time with the graphical interface, while hands on control is just as close at hand thanks to the powered USB host port, perfect for attaching your favorite MIDI controller for live mix control. Three CV inputs are available as well, which can be freely assigned to mix parameters to get signals moving with CV. By connecting a compatible AXON expander, you can add even more CV inputs for up to seven independent CV controls. In addition to saving settings between power cycles, With Mixer allows you to save and recall eight full mixes, making it a breeze to program live sets and perform with confidence. Whether you already enjoy the multitrack capabilities of Stem Ripper or are looking at the pair together, With Mixer from ALM is an expander that brings an incredible amount of new functionality to any system, providing an all-in-one mixing and recording workstation for any modular musician.
With Mixer Features
Digital mixer expander for ALM Stem Ripper Mixes all eight channels of Stem Ripper with stereo output Per-channel level / gain control, panning, dual stereo auxiliary sends, and mute / solo controls Final mix is recorded to Stem Ripper alongside eight individual stems 3x assignable CV inputs USB host connection enables control with your favorite MIDI controller Graphical interface for visualizing and adjusting mix and recording parameters Save and recall 8 complete mixer set-ups Connect an Axon expander for additional CV inputs Product Details
"Katla Field Notes is a series of long-form improvisations on Katla, a polyphonic synthesizer inspired by its namesake, Iceland's largest subglacial volcano.
Recorded at Kleifarvatn, August 2026. Direct out from Katla into Zoom H6, no processing beyond a touch of limiting."
Playlist as of this post:
1. Katla Field Notes: Grass Field
2. Katla Field Notes: Scree
3. Katla Field Notes: Horses
4. Katla Field Notes: Kleifarvatn
