Acid Snow - PHENOL Jam

Published on Jan 9, 2017 KilpatrickAudio

"Check out this jam done by David Waldman using the Kilpatrick Audio PHENOL."

PHENOL Modular Synth

Published on Oct 9, 2016 KilpatrickAudio

Kilpatrick Audio Introduces the K3021 Master VCO Eurorack Module

K3021 Master VCO Module Demo Published on Sep 27, 2016 KilpatrickAudio

"Check out the K3021 Master VCO module from Kilpatrick Audio. This module offers the same amazing sound and features as half of the K3020 Dual VCO in a compact and affordable module."

via Kilpatrick Audio

"Eurorack Triangle Core VCO with Waveshapers - 18HP

Built on the success of the K3020 Dual VCO, the K3021 Master VCO offers a single channel oscillator based on this famous design. Completely redesigned to replace now hard to find parts, the K3021 uses a complete new triangle core design based around discrete transistors for an amazing tone excellent stability. Useful as both your main pitch oscillator and as a complex low-frequency signal source (LFO) the K3021 Master VCO is a workhorse module great for any system.

One of the features that makes the K3021 extra special is its use of complex waveshapers and pulse width modulation circuits to create unique timbres. You can select between sine, triangle and ramp waveforms for the WAVE section. These waves then feed into the triple pulse width modulator to create very rich pulse waves that have a much more lively character than a simple single-channel PWM. Choose from one of three PULSE output combinations for unique variations.

The BLEND and PULSE outputs can be used independently, or can be combined through the use of the ultra-low distortion blend section. Smoothly fade between the WAVE and PULSE waveforms either manually or with voltage control. By using the blend circuit especially with the LFO mode engaged, very complex modulation waveforms can be easily created.

Features and Specs

Eurorack (3U) form factor - 18HP width
Master VCO with on board precision power regulation
LED indication of selected switch positions and VCO core activity
1V/octave CV input - factory trimmed for 1V/octave response
Linear FM input with level control
Fine and coarse tuning controls
Normal VCO frequency range: 2Hz to 15kHz
LFO mode switch - period approx. 60 seconds to low audio range
Temperature compensated exponential converter with matched transistors
All-new discrete triangle-core and sine wave shaper
Wave shaper with sine, triangle or ramp waveforms - switch selectable
Pulse shaper with triple pulse width modulators for complete timbres
Voltage controlled mixing between wave and pulse waveforms
High-end blend VCAs with ultra-low distortion and linear control
Sync input for hard syncing of VCO core
PWM input with level and offset controls
Blend VCA control input with level and offset controls - full deflection with 5Vpk-pk
Blend output - output from the blend VCA containing wave and/or pulse waveforms
Pulse output - dedicated output from the pulse shaper containing pulse waveform
All inputs and outputs are tolerant of +/-12V
All outputs drive 10Vp-p with 1K output impedance
Requires +12V (90mA), -12V (50mA) - 16 pin Doepfer-style power cable used - approx. 1.7W total power consumption
Designed and made in Canada using high quality parts.
Warranty: 1 year"

K6501 PHILTER Module Demo

Published on Sep 23, 2016 KilpatrickAudio

"Check out the K6501 PHILTER module from Kilpatrick Audio. The same great taste as the filter in PHENOL, but in a Eurorack module!"

Kilpatrick Audio Phenol // Patch 018 - Bubbling

Published on Jul 7, 2016 DiscoverNoise

"DiscoverNoise 048-
Kilpatrick Audio Phenol 019-

The Phenol is being sequenced by the Arturia Beatstep via Midi. Patch has a bit of dark crunchy sounds leading up to high pitched sounds well rounded with some delay:)

Kilpatrick Audio Phenol: http://www.kilpatrickaudio.com/?p=phenol

Patchsheet: https://cloud.1und1.de/ngcloud/extern..."

Kilpatrick Podcast 2: Joy of Design

Published on Jun 22, 2016 Andrew Kilpatrick

"Here I discuss the history of my music making setup and how I ended up getting into designing musical instruments. I talk about the various forms of inspiration and why I think designing gear is fun.

The audio was recorded in the place I'm currently staying in Bangkok and the video is a view of Bangkok in the rainy season.

You can learn more about my projects here: http://www.kilpatrickaudio.com"

Kilpatrick Audio Phenol // Patch 017 - Beehive

Published on Jun 16, 2016 DiscoverNoise

"DiscoverNoise 045-
Kilpatrick Audio Phenol 018-

All hail the bee queen!

Patchsheet:
https://cloud.1und1.de/ngcloud/extern...

Kilpatrick Audio Phenol:
http://www.kilpatrickaudio.com/?p=phenol"

Andrew Kilpatrick Podcasts

Tech Podcast EP 1: Introduction

Published on Jun 15, 2016 Andrew Kilpatrick

"Join me on my new podcast where I tell stories and explain my philosophy on designing synthesizers, electronics and doing what you're passionate about. I hope you will enjoy it.

Since 2008 I have been designing musical equipment under the Kilpatrick Audio brand: www.kilpatrickaudio.com"

I will be sharing these here on MATRIXSYNTH as they go up.

CLICK FOR MORE »

Kilpatrick Audio at SUPERBOOTH16

Published on Apr 4, 2016 KilpatrickAudio

"Here is a short video montage of Kilpatrick Audio's stand at SUPERBOOTH16. Thanks to everyone who made it possible. It was great great to meet so many of you!"

Spotlight: Kat Burns (Kashka)

Published on Mar 9, 2016 KilpatrickAudio

"Learn about Kat Burns and how she incorporated PHENOL into her sound."

Circuits - PHENOL Demo

Published on Feb 18, 2016 KilpatrickAudio

"Kilpatrick Audio is pleased to present: "Circuits" by David Waldman, an sound and visual adventure into the depths of the city. The soundtrack was created entirely with the PHENOL patchable analog synthesizer from Kilpatrick Audio."

Kilpatrick Audio Spotlight: Carl Didur and Andrew Dordevic

Published on Jan 25, 2016 KilpatrickAudio

"Step into the world of experimental music with Carl and Andrew, two Toronto musicians that love using interesting devices to make music. They had a few weeks to explore PHENOL before we went to meet them and find out their thoughts and hear what they made with it.

You can you find Carl Didur online at: http://carldidur.bandcamp.com"

CARBON Jam

Published on Jan 1, 2016 KilpatrickAudio

"Here's a little tune made with CARBON on NYE 2016! Experimenting with three different scenes, track mutes and live soloing. The instruments used are PHENOL, Juno-2, D-550 and Machinedrum. All MIDI is generated by CARBON.

Support our crowdfunding campaign now: http://store.kilpatrickaudio.com/carbon"

VennDiagram - CARBON Sequencer Demo

Published on Dec 8, 2015 KilpatrickAudio

"Music by: VennDiagram
Video by: Kilpatrick Audio

Notes from VennDiagram:

Synth Used - Roland JDXA

3 x Analog Parts each for Kick / Snare / Hi-Hat run on Midi Channels 1,2 & 3
3 x Digital Synth Parts Mono bass / Lead / Poly Pad on Channel 5,6 & 9

Sequencer Carbon - using Midi only

Track 1 - Midi Channel 1 - Kick
Track 2 - Midi Channel 2 - Snare
Track 3 - Midi Channel 3 - Hi-Hat
Track 4 - Midi Channel 5 - Bass
Track 5 - Midi Channel 6 - Lead
Track 6 - Midi Channel 9 - Poly Pad

Carbon Initial Track Configuration

Track 1 Kick - 1/16 step resolution with the sequence using 32 steps total

CLICK FOR MORE »

CARBON Patterns and Scenes

Published on Nov 24, 2015 KilpatrickAudio

"Learn more about how patterns and scenes are used to create music with CARBON. Andrew explains more about the realtime control and manipulation that is possible. The upcoming song mode is also discussed."

CARBON Recording and Editing

Published on Nov 18, 2015 KilpatrickAudio

"Take a closer look at the recording and editing functions of the CARBON sequencer. In this video we are controlling several MIDI synths as well as using PHENOL in duophonic mode with the CV/gate outputs from CARBON.'

The Stereo Effect Project - C6 (CARBON Sequencer Demo)

Published on Nov 15, 2015 KilpatrickAudio

"Check out Keith as he puts CARBON through its paces. CARBON is controlling an electric piano, Roland Juno 106, Yamaha S612 sampler, and syncing a Korg volca beats, as well as modulating the filter on a Korg MS-20 Mini for some pulsating effects. The entire tune including arpeggiators were recorded in a single take."

CARBON LIVE Performance Features

Published on Nov 7, 2015 KilpatrickAudio

"Check out how CARBON can be used as a MIDI router and performance control system in your studio or on stage.

Please support our crowdfunding campaign for this project: http://store.kilpatrickaudio.com/carbon"

Kilpatrick Audio CARBON Sequencer Crowdfunding Campaign

Published on Nov 5, 2015 KilpatrickAudio

"Learn about CARBON and our crowdfunding campaign to support the development of this exciting project!"

http://store.kilpatrickaudio.com/carbon

See the CARBON sneak peak video here.

Details for the archives because we all know they tend to disappear over time:

"Ever since the K4815 Pattern Generator module was released to great praise in 2010
we have been planning a follow-up product that would take the Pattern Generator concept to a whole new level.
After five years of planning and exploration we are proud to present: CARBON

CARBON offers several distinct and powerful functions that will change the way you compose and perform.
FEATURES

Sequencer, performance control system and USB interface.
Ever since the K4815 Pattern Generator module was released to great praise in 2010 we have been planning a follow-up product that would take the Pattern Generator concept to a whole new level. After five years of planning and exploration we are proud to present: CARBON

CARBON offers several distinct and powerful functions that will change the way you compose and perform.

Sequencer
CARBON is primarily designed as a pattern-based sequencer. It has six tracks which can each hold 64 steps. Steps can be generated randomly, edited interactively, or recorded from a MIDI keyboard one step at a time, or in realtime while the sequencer is running. Polyphony and CC recording is supported so each step can contain chords or other performance data.

The fun begins once you've got some notes playing back on a track. Choose a region to play back, say, the first 8 steps. The track will play those same 8 steps over and over. Now move to another track and record a new sequence. This sequence can be a different length, or play back at a different speed. It can even play backwards while the other sequence plays forwards.

Remix with Patterns and Scenes!
The real power of CARBON is how variations of sequences can be made. By simply turning the PATTERN control, different steps in the sequence can be enabled and disabled. The patterns will surprise and inspire you by creating new rhythms and motifs with a simple twist of a knob. These are all based on your original sequence and can be changed at any time.

Adding in the concept of scenes lets you quickly switch between different parts of a song or different variations. Scenes can store the range of steps to play, the pattern, track mute state and a number of other parameters. Switching back and forth between scenes offers endless performance potential without ever missing a beat.

The best part of the CARBON sequencer is that all the recording and editing can be done in real-time without ever stopping the sequencer.

CLICK FOR MORE »

New Kilpatrick Audio CARBON Sequencer - Sneak Peak

Published on Oct 29, 2015 KilpatrickAudio

"Here is a quick demonstration of the CARBON Sequencer and Performance System from Kilpatrick Audio! This video shows a few of the real-time recording and performance function.

MIDI is being sent from CARBON to a PHENOL, Juno-2, D-550 and Machinedrum on each of four tracks."