Blog35 29 pazdziernika-4 listopada 2012 by ShortSleeves
"Finally an all Eurorack track, well, mostly Eurorack :-) Three Doepfer modules used: A-105 lowpass filter, A-149 source of uncertainty, A-147 VC LFO. Square wave from the A-147 sent as audio to the A-105. The rest is still a haze for me - will try to write it down if anyone's interested. EHX Deluxe Memory Boy analog delay in the FX loop of the mixer. Reverb from Ableton. Enjoy."
Doepfer Doing Buchla
via Ćukasz Kacperczyk on The MATRIXSYNTH Lounge
Update: the patch sheet.
Wednesday, October 31, 2012
Elka Synthex SN 710 with MIDI
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Midi is installed on this unit, and midi breakout box is also provided... This particular Synthex had previously been owned by a representative for Elka in Canada, and shows little to no sign of use."
via this auction
"Midi is installed on this unit, and midi breakout box is also provided... This particular Synthex had previously been owned by a representative for Elka in Canada, and shows little to no sign of use."
Alesis A6 Andromeda Synthesizer
Roland System 100m Dual Portamento SN 270130
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
sir_analog (RSS)
"This module has two independent controllers. Each has a CV input (e.g. a keyboard) a CV output (e.g. to a VCO) and a portamento on/off switch, with green LED indicator. There is a slider for adjusting the the portamento time (2 ms to 5s) and a portamento modulation CV input. Also included is a MPX input (and red LED indicator) for switching the portamento on/off from an MC8 or MC4 MicroComposer, with a slider for setting the initial depth."
via this auction
sir_analog (RSS)
"This module has two independent controllers. Each has a CV input (e.g. a keyboard) a CV output (e.g. to a VCO) and a portamento on/off switch, with green LED indicator. There is a slider for adjusting the the portamento time (2 ms to 5s) and a portamento modulation CV input. Also included is a MPX input (and red LED indicator) for switching the portamento on/off from an MC8 or MC4 MicroComposer, with a slider for setting the initial depth."
Roland MC500 MKII
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
yousenditworks (RSS)
via this auction
yousenditworks (RSS)
Light Globe Synth
Published on Oct 31, 2012 by NakagawaGakki
"A small synth box with 2 light sensitive Oscillators modulated but 2 pot controllable LFOs.
Circuit using a single 40106 CMOS chip freeformed (no circuit board) inside a re-purposed incandescent light bulb.
Amplification is from a single LM 358 deadbug style under the wooden control panel.
Powered from a 9V battery.
Fun to play in the sunshine aswell.
Sorry for the out of focus, had trouble with the cam."
monotribe + amplug demo - ONETIME / BakaOscillator.
Published on Oct 31, 2012 by BakaOscillator
"Composed by BakaOscillator.
Use, KORG monotribe + VOX amplug."
EMS Sync Melody 01
Published on Oct 31, 2012 by djangosfire
"No sequencers used - EMS Synthi improv: "Sync Melody 01" - raw signal, no compression - straight into computer."
Shruthi-1 Polivoks filter board
Published on Oct 31, 2012 by my4trackmachine
"Just showing off the filter and then showing the basic oscillators of the Shruthi-1."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH