via this auction - learn how to sell on eBay here
Monday, October 07, 2013
ROLAND Juno-106 Vintage Analog Synthesizer w/ Hard Case SN 492543
Note: Auction links are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
via this auction - learn how to sell on eBay here
Roland Jupiter 6 Synthesizer with Europa Upgrade
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
"Roland Jupiter 6 Synthesizer w/ the Europa MIDI upgrade. It's in perfect working condition and in great physical condition..."
via this auction
"Roland Jupiter 6 Synthesizer w/ the Europa MIDI upgrade. It's in perfect working condition and in great physical condition..."
Vintage Rheem Key Bass with Internal Mod
Note: Auction links are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"It works great but it's out of tune, it's been worked on, somebody modded it (see pic) That pot changes the tone (i guess for tuning it?) i have the power cord Perfect for a project or replacement"
Pics of the inside below.
via this auction - learn how to sell on eBay here
"It works great but it's out of tune, it's been worked on, somebody modded it (see pic) That pot changes the tone (i guess for tuning it?) i have the power cord Perfect for a project or replacement"
Pics of the inside below.
R.A. Minimoog Model D Synthesizer SN 1066
Note: Auction links are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
"Where to begin... Here is a rare opportunity to purchase a beautiful metal faced RA Minimoog with original clear mod and pitch wheels. This R.A. Minimoog SN 066, has been completely gone through by Wes Taggart from analogics....and it sounds great! The keybed has been gone through with new bushings, keys leveled and the action is perfect! The new wood case Wes made is simply beautiful, he also installed multi turn trim pots on the 1st version (RA) osc board to make them more stable, and surprisingly you wont have to retune every five minutes!.."
via this auction - learn how to sell on eBay here
"Where to begin... Here is a rare opportunity to purchase a beautiful metal faced RA Minimoog with original clear mod and pitch wheels. This R.A. Minimoog SN 066, has been completely gone through by Wes Taggart from analogics....and it sounds great! The keybed has been gone through with new bushings, keys leveled and the action is perfect! The new wood case Wes made is simply beautiful, he also installed multi turn trim pots on the 1st version (RA) osc board to make them more stable, and surprisingly you wont have to retune every five minutes!.."
Dr. Blankenstein "THE ENDEAVOUR" SPACE LINE GENERATOR
Note: Auction links are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
Dr. Blankenstein on eBay (RSS)
Video at the auction and posted here.
10 Step Analog Sequencer / Synth
Control SPEED, PITCH & FILTER with Knob / Motion / Touch Control !
Lock & Key and Momentary Stutter ON / OFF Switches w/
EXTRA LARGE 10MM AMBIENT COLOR CHANGING LEDS
DESCRIPTION: What we have here is a 10 step analog sequencer, running a square wave oscillator. Each step of the bass line can be tuned via the 10 main sequence knobs (further right you turn, higher the pitch for each note of the line). This unit is intended as a stand alone sound creation device, at has NO sync out or in... hence why it should be considered a "space line generator" ;) Oh, and for added fun.. there is an ILLUMIRINGER put on the end of the signal chain for epic tweaking! Quickly I will mention the EPIC graphics she's rocking... the main graphic is an original mash up focused around an amazing image of the cockpit of the Space Shuttle "Endeavour"... As you might have guessed.. this is where the piece gets it's name.
All of this is controlled via the 3 sections at the top of the unit... each section has the option to be either controlled via a knob, light sensor or pair of touch points (at the bottom of the unit.) First, we have the "SPEED" which will control the tempo of the sequence. Next, there is the "PITCH" controls.. and finally the "FILTER" which is tied into the effects section. The filter fx can be turned on and off via the switch to the left of the Knob / Sensor control switch on the right most control section.
The touch points are set up in pairs... from left to right... 1st Speed, 2nd Pitch, 3rd Voltage Drain, 4th Effect. They can be used in pairs OR in different configuration to get some really exciting expression out of the piece.
The light sensors on this thing are SICK! Massive range... super sensitive! So many way to jam on them... I couldn't include all of them in the video there were SO MANY... so use your imagination. I really enjoy turning ALL of them on at once and creating MASSIVE SONIC NOSE DIVES by simply slowly turning the piece towards and away from a light source.. an experience that can only be understand by trying it ;)
Unit can be turned on via a mission impossible style key start (two keys included).. or a big red momentary button. 9v Power adapter powered for maximum juice'ness (this thing is a bit of a beast) which is of course INCLUDED. This is a solid PCB design, not perf . vero board etc... meaning this sucker was BUILT TO LAST.
As of now this is the ONLY ONE IN EXISTENCE. As usual, depending on the reaction this time around.. maybe I will make a few more in the future.. but as you might have guessed... building this sucker is quite an ENDEAVOUR ;)
There is SO MUCH more I can say about this piece... but you should really just check out the DEMO VIDEO and throw down a bid before someone else snakes it! (joking, but for real.. BID NOW!) haha
~DR. B
WHO IS DR. BLANKENSTEIN?
CHECK OUT MORE DR. BLANKENSTEIN AUCTIONS
FEATURES:
- 10 Step Sequencer (Programmed via 10 Knobs)
- 3 CONTROL SECTIONS: Speed, Pitch, and Filter
- 8 Body Contacts (in pairs) control same parameters as control section, +2 for voltage drain.
- Each control section can be altered with Knob, Light / Motion and touch CONTROL!
- Lock & Key ON/ OFF Switch (Unit stays powered up after key is removed) 2 KEYS INCLUDED!
- Big Red Momentary ON / OFF switch allows you to stutter in bass lines!
- 1/4" Mono Output Jack
- Volume Control knob
- All original full color graphics featuring the cockpit of the USS ENDEAVOUR Space Shuttle !
- 2 EXTRA LARGE 10MM Color Changing LEDS (adds a ton of ambience to your setup, see pics)
- 9V Power Adapter Powered (INCLUDED!)
- SO MANY WAYS TO EXPLORE AND JAM! Designed to NEVER become boring!
- Quality / Professional build!
- Origin PCB Design, Etched... NOT on perf / vero board. Reinforced wiring / solder points.
- ONE OF A KIND Numbered Piece! BUILT TO LAST!"
via this auction - learn how to sell on eBay here
Dr. Blankenstein on eBay (RSS)
Video at the auction and posted here.
10 Step Analog Sequencer / Synth
Control SPEED, PITCH & FILTER with Knob / Motion / Touch Control !
Lock & Key and Momentary Stutter ON / OFF Switches w/
EXTRA LARGE 10MM AMBIENT COLOR CHANGING LEDS
DESCRIPTION: What we have here is a 10 step analog sequencer, running a square wave oscillator. Each step of the bass line can be tuned via the 10 main sequence knobs (further right you turn, higher the pitch for each note of the line). This unit is intended as a stand alone sound creation device, at has NO sync out or in... hence why it should be considered a "space line generator" ;) Oh, and for added fun.. there is an ILLUMIRINGER put on the end of the signal chain for epic tweaking! Quickly I will mention the EPIC graphics she's rocking... the main graphic is an original mash up focused around an amazing image of the cockpit of the Space Shuttle "Endeavour"... As you might have guessed.. this is where the piece gets it's name.
All of this is controlled via the 3 sections at the top of the unit... each section has the option to be either controlled via a knob, light sensor or pair of touch points (at the bottom of the unit.) First, we have the "SPEED" which will control the tempo of the sequence. Next, there is the "PITCH" controls.. and finally the "FILTER" which is tied into the effects section. The filter fx can be turned on and off via the switch to the left of the Knob / Sensor control switch on the right most control section.
The touch points are set up in pairs... from left to right... 1st Speed, 2nd Pitch, 3rd Voltage Drain, 4th Effect. They can be used in pairs OR in different configuration to get some really exciting expression out of the piece.
The light sensors on this thing are SICK! Massive range... super sensitive! So many way to jam on them... I couldn't include all of them in the video there were SO MANY... so use your imagination. I really enjoy turning ALL of them on at once and creating MASSIVE SONIC NOSE DIVES by simply slowly turning the piece towards and away from a light source.. an experience that can only be understand by trying it ;)
Unit can be turned on via a mission impossible style key start (two keys included).. or a big red momentary button. 9v Power adapter powered for maximum juice'ness (this thing is a bit of a beast) which is of course INCLUDED. This is a solid PCB design, not perf . vero board etc... meaning this sucker was BUILT TO LAST.
As of now this is the ONLY ONE IN EXISTENCE. As usual, depending on the reaction this time around.. maybe I will make a few more in the future.. but as you might have guessed... building this sucker is quite an ENDEAVOUR ;)
There is SO MUCH more I can say about this piece... but you should really just check out the DEMO VIDEO and throw down a bid before someone else snakes it! (joking, but for real.. BID NOW!) haha
~DR. B
WHO IS DR. BLANKENSTEIN?
CHECK OUT MORE DR. BLANKENSTEIN AUCTIONS
FEATURES:
- 10 Step Sequencer (Programmed via 10 Knobs)
- 3 CONTROL SECTIONS: Speed, Pitch, and Filter
- 8 Body Contacts (in pairs) control same parameters as control section, +2 for voltage drain.
- Each control section can be altered with Knob, Light / Motion and touch CONTROL!
- Lock & Key ON/ OFF Switch (Unit stays powered up after key is removed) 2 KEYS INCLUDED!
- Big Red Momentary ON / OFF switch allows you to stutter in bass lines!
- 1/4" Mono Output Jack
- Volume Control knob
- All original full color graphics featuring the cockpit of the USS ENDEAVOUR Space Shuttle !
- 2 EXTRA LARGE 10MM Color Changing LEDS (adds a ton of ambience to your setup, see pics)
- 9V Power Adapter Powered (INCLUDED!)
- SO MANY WAYS TO EXPLORE AND JAM! Designed to NEVER become boring!
- Quality / Professional build!
- Origin PCB Design, Etched... NOT on perf / vero board. Reinforced wiring / solder points.
- ONE OF A KIND Numbered Piece! BUILT TO LAST!"
Triadex Muse (digital desktop synth)
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Pic of the inside below.
via this auction
Pic of the inside below.
Original 70's KORG MS-20
Note: Auction links are affiliate links for which the site may be compensated.
via this auction - learn how to sell on eBay here
Pics of the knobs, circuit board, and faceplate below.
via this auction - learn how to sell on eBay here
Pics of the knobs, circuit board, and faceplate below.
Roland RS-505 Paraphonic String Ensemble Synthesizer with External Input
Note: Auction links are affiliate links for which the site may be compensated.
Roland RS-505 Paraphonic Synthesizer / Stringer Test Out
Uploaded on Sep 20, 2013 zibbybone·127 videos
via this auction - learn how to sell on eBay here
"Demonstrating the functionality (and lack thereof) of this instrument I am selling. As you can see/hear, just the 'Synthesizer' section is operational. The Bass and Strings sections are not working. Towards the end of the video, I show that the external input is working using my SH-101 so you can process another instrument with the 505's on board ensemble effect."
Uploaded on Sep 20, 2013 zibbybone·127 videos
via this auction - learn how to sell on eBay here
"Demonstrating the functionality (and lack thereof) of this instrument I am selling. As you can see/hear, just the 'Synthesizer' section is operational. The Bass and Strings sections are not working. Towards the end of the video, I show that the external input is working using my SH-101 so you can process another instrument with the 505's on board ensemble effect."
1979 PAiA Gnome Synth
Note: Auction links are affiliate links for which the site may be compensated.
via this auction
Pics of the inside below.
via this auction
Pics of the inside below.
ios7 allows midi interfaces over USB on an iPhone?
Published on Oct 4, 2013 Gaz Williams·15 videos
"A little trumpeted feature of ios7 on the iPhone is the ability to use a camera connection kit which facilitates audio and midi interfaces to be connected over USB. Fantastic news for micro studios on the go!"
CME Xkeys on eBay
Update: via Moogulator of seqeuncer.de in the comments: "uhm, no - i tried anything adaptor 30pin/lightning, the new CamKit for Lightning on iPhone 5 - they all don't work - I Phone says 'is not supported' or just nothing.. so.. don't know what they do to get it to work in ios7 alone.."
It looks like it depends on the device. If anyone else has tried, feel free to share your experience.
Update via @pldDavid: "worked on my MC603C/A (GSM) iPhone4 using the cam kit and a generic usb MIDI cable."
PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH
