EMW WCS-X – from Test to Track (Part 2)

video upload by EMW Synthesizers

"This is the next step in the track that began as a simple lab test.
We continue building and arranging the music using the WCS-X, with simple hardware processing and a few effects inside the DAW.
This isn’t about a perfect mix, it’s about exploring sound and ideas."

Follow-up to this post.

WCS-X - Just a Lab Test… Until It Wasn’t

video upload by EMW Synthesizers

"This was made using only the WCS-X, a simple mixer, and an old-school audio editor. From here on, the idea is to keep adding more tracks using the same setup, nothing else."

EMW WCS-X Oscillator Demo – Wavetables, LFOs, AD Generators, PWM modulation & Sync

video upload by EMW Synthesizers

"This video demonstrates the oscillator section of the WCS-X synthesizer, focusing on its waveforms, LFOs, PWM/Wave shaping modulation, Vintage effect character, and Hard Sync behavior.
All sounds are generated directly by the WCS-X. The demo highlights the raw tonal character of the oscillators as well as their response to modulation and oscillator interaction."

WCS-X – Firmware Update | New Patches & New Features

video upload by EMW Synthesizers

"The WCS-X has received a major firmware update, introducing a wide range of new features and sonic improvements that significantly expand the synthesizer’s capabilities.

Among the highlights are Oscillator SYNC, PWM and Wave Folding, independent Attack/Decay generators per oscillator for pitch modulation, and a new Vintage parameter that adds warmth and character to the sound. Patch memory has now been implemented, allowing up to 128 patches to be stored directly in the instrument.

The update also introduces a new LFO with 15 waveforms, as well as new modes for Glide and Gate type, offering more expressive control and flexibility in performance and sequencing.

This short video showcases some of the new patches, demonstrating how these new features can be used in real sounds and musical contexts.

We believe this marks the final firmware version — and more news is coming soon 👀 Stay tuned and enjoy the sound! 🎶✨"

EMW WCS-X Synthesizer Update: Transient Sample Player

video upload by EMW Synthesizers

"This video showcases the new transient sample player added to the WCS-X.
The transient module can replace Oscillator 3, allowing you to choose between three oscillators or two oscillators plus transients. With a library of 64 transient samples, it adds a new layer of attack, punch, and character to the sound.
Thanks for watching!"

Casio FZ-1 – Installing the New OLED Display Kit

video upload by EMW Synthesizers

Addtional EMW Casio posts

"INFORMATION

The project works perfectly for normal use of the FZ-1, FZ-10M and FZ-20M. All menu screens, editing pages, sampling functions, parameters and general operation display correctly. Only a few fully graphical screens, such as Hand Drawing, Sin Synthesis and Graphic Envelope, may show minor pixel irregularities. This does not affect usability in any way; these functions continue to work normally and the issue is purely visual.
As I no longer have time to continue development, I do not plan to refine these small graphical details. Even so, the kit leaves the FZ fully usable, which is exactly what allowed me to bring my own FZ-1 and FZ-20M back to life and use them normally again.

FZ-1 Kit

For the FZ-1, we supply a complete kit, including:
A dedicated support with the logic board.
A second support with the new OLED display that fits perfectly into the original display mounting position.

Installation requires no soldering and no special skills. The kit uses the original FZ-1 mounting screws, and the entire installation can be completed in under 20 minutes.
Please watch the FZ-1 installation video on our YouTube channel for a full step-by-step demonstration.

FZ-10M and FZ-20M Kit

For the FZ-10M and FZ-20M, we supply a single integrated assembly including the support, logic board and display. This assembly fits perfectly into the original display location of the module.

Installation is very simple, requires no soldering, and typically takes around 15 minutes. The process is also demonstrated in the installation video available on our YouTube channel.

Pricing and Ordering

The price for the kit (logic board, display, supports and cables) is US$249.00 + shipping.

CLICK FOR MORE »

EMW WCS-X – External FX Demo

video upload by EMW Synthesizers

"Here’s a new round of sounds from the upcoming WCS-X, this time running through a chain of external effects. The goal here is simple: show how far this little synth can go once you open it up to a wider sonic palette."

EMW Introduces the WCS-X - MINI SYNTHESIZER

video upload by EMW Synthesizers

3 digital oscillators (30 waveforms each) + noise
Analog VCF (Band-Pass / Low-Pass)
Analog VCA
Analog LFO
Analog ADSR
Adjustable glide
Pitch modulation via LFO

CASIO FZ-10M / FZ-20M New OLED Display connection.

video upload by EMW Synthesizers

"The project works perfectly for normal use of the FZ-1, FZ-10M and FZ-20M. All menu screens, editing pages, sampling functions, parameters and general operation display correctly. Only a few fully-graphical screens — such as Hand Drawing, Sin Synthesis and Envelope — show small pixel irregularities. This doesn’t affect usability at all; those functions still work normally, it’s only a visual detail.

Since I no longer have time to continue development, I don’t plan to refine those small graphical variations. Even so, the kit leaves the FZ fully usable, which is exactly what allowed me to bring my own FZ-1 and FZ-20M back to life and use them normally again.

For the FZ-10M and FZ-20M, the kit is supplied already mounted on a dedicated support/bracket. You simply remove the original display module and install the new assembly in the same place, as shown in the video. This makes the upgrade very straightforward for these models.

For the FZ-1, I provide the logic board, the display and the cables for connection. In this case, the internal mechanical mounting and support are left to each user, who can adapt the installation to their own unit. It’s not difficult, but it does require some basic DIY skill.

The price for the board, display and cables is $199.00 + shipping. The payment must be made to our PayPal registered account: info@electronicmusicworks.com

If you are interested just send an email to: info@electronicmusicworks.com

Note: We are currently unable to ship to the United States, as our mail service is still adjusting its system to the new tariff policies."

CASIO FZ-1 / FZ-10M / FZ-20M New OLED Display

video upload by EMW Synthesizers

"Here is a quick demo of the Casio FZ module in operation using our OLED display kit."

EMW - NOISE BANK Eurorack Module

video upload by EMW Synthesizers

"Some great sound atmospheres and effects created by our new NOISE BANK Eurorack module.
It features 150 types of noise, various trigger options, and pitch control."

EMW - STEREOLIZER PROCESSOR Eurorack module

video upload by EMW Synthesizers

www.electronicmusicworks.com

EMW MINI-3 Oscillator Bank - Initial test (RAMP)

video upload by EMW Synthesizers

"EMW MINI-3 – New Eurorack Module (8HP)! A compact MIDI oscillator delivering the iconic punch and power of the legendary Minimoog oscillator bank."

Nothing v2 - Electronic Pop Music

video upload by POPTRONIC

"2025 remastered version, featuring EMW's System 15 Analog Synthesizer."

POPTRONIC is the man behind Electronic Music Works / EMW: https://www.electronicmusicworks.com.

You can find additional posts featuring EMW's System 15 here.

WORDS - Electronic Music

video upload by POPTRONIC

The above is a rework of a 1996 track by EMW's (Electronic Music Works) Paulo S. Santos aka PS Project. The piece features some of his ear VCF progject: "I'm excited to share that I'm launching a musical project featuring a remastered version of a track I composed many years ago, titled 'WORDS.' This piece showcases sounds from my early VCF projects."

YouTube description follows:
"WORDS A 1996 electronic track reborn. This newly remastered version bridges past and present in a hypnotic audiovisual journey. Enjoy!

Created and recorded by Paulo S. Santos (PS Project)."

EMW WCS-1x

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

"EMW WCS-1x Digital/Analog hybrid monosynth in excellent cosmetic and fully functional condition. I bought this after hearing it at a trade show. The multimode filter sounds amazing, super punchy and does incredible bass sounds, but also strange SH-03 style timbers.

The WCS-1x uses a DSP-based "Wave Composition Oscillator". The WCO's toggle switches allow you to access several waveshapes ( -including a fundamental square, a sub-octave, an "acid ring" waveform -which adds an aggressive edge to your sound, a sawtooth as well as a square wave -routed through either a bandpass or low pass filter -depending upon their respective toggle's position ). The WCO's toggle switches also allow you to select various octave settings ( +1 Octave, +3 Octaves or the fundamental's ). The LFO wave toggle allows you to select either a triangle or square wave for modulation purposes. At the top left corner of the WCO section is a MIDI channel button ( -with a "Gate" and "Learn" LED ). Next to it, you'll find a glide + and - ( portamento ) toggle switch. An unconventional arrangement but it works once you get used to it.

The remainder of the WCS-1x's controls are more straight forward knobs. You get one each for filter cut-off, filter resonance, filter envelope modulation, filter LFO modulation ( amount ) with the last knob to the right controlling the LFO's frequency. Below the filter section you'll find four knobs for controlling VCA attack, decay, sustain and release envelope segments. The knobs have a smooth, rock solid feel as you turn them."

EMW - NOISE CINEMA Eurorack module

video upload by EMW Synthesizers

EMW - NOISE CINEMA - 01 (no external effects)

electronicmusicworks · EMW - NOISE CINEMA - 01 (no external effects)

See this post for details on EMW's NOISE CINEMA module.

EMW Introduces NOISE CINEMA "innovative Eurorack module designed to transcend traditional boundaries"

"Step into a landscape of new sounds with our NOISE CINEMA, an innovative Eurorack module designed to transcend traditional boundaries. This module offers synthesizer enthusiasts the unique ability to shape and manipulate noise, creating atmospheres that capture the essence of imaginary scenes and intense experiences.

With NOISE CINEMA, every adjustment is a journey to the heart of sound, where noise becomes the protagonist of your soundtrack. From soft whispers to tumultuous sonic storms, the possibilities are limitless. Equipped with intuitive controls such as Morph, which smoothly transitions between 10 noise atmospheres, continuous or envelope modes, sample rate reduction, a special tone control, and a digital delay, this module allows for detailed and deep exploration of sound textures.

Ideal for musicians, producers, and sound designers seeking to expand their creative horizons, NOISE CINEMA is more than a module—it's a gateway to a world where sound shapes vision and emotion. Turn noises into narratives, atmospheres into adventures, and the ordinary into the extraordinary.

It will be available for order from EMW's website at www.electronicmusicworks.com starting next week.

NOISE CINEMA, because every sound tells a story."

EMW T-SEQUENCER - Random Sequences

video upload by EMW Synthesizers