MSW-820 MIDI Control of LFO Settings

video upload by Michigan Synth Works

"Demo of controling various LFO controls via MIDI CC"

Best Music Gear of 2025: Artist + Creator Picks - Perfect Circuit

video upload by Perfect Circuit

"2025 is drawing to a close, so we returned to a time-honored tradition: we asked some of our pals + some of our favorite artists/content creators to tell us about THEIR favorite gear acquisition of the year. We heard about new Make Noise modules, Elektron's fresh takes on sampling, and even about — gasp! — an AUDIO INTERFACE!

Just some fun times talkin' about fun gear :)

Scope it out and read all about the gear in question on our blog, Signal.

Special thanks to all of our pals — links & timestamps below:
0:05 ‪@sarahbellereid‬ & the Make Noise PoliMaths
2:50 ‪@soffter‬ & the BASTL Citadel Wave Bard
5:24 ‪@AudioPilz‬ & the SSL18
7:37 ‪@MidlifeSynthesist‬ & the Akai MPC Live III
10:49 ‪@SONWU‬ & the Ableton Move
13:50 ‪@BennJordan‬ & the SOMA Terra
16:43 ‪@JorbLovesGear‬ & the Michigan Synth Works MSW-810
18:51 ‪@EZBOT_‬ & the Elektron Tonverk


+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Perfect Circuit is an independent electronic instrument shop with an online store at https://www.perfectcircuit.com/ and a Burbank, California showroom at 2405 Empire Ave. We're open seven days a week, 12-8 PM, and our entire inventory is available to try out in person. Get your hands on the most excellent analog and digital synthesizers, effect pedals, Eurorack modular synths, drum machines, recording gear, and more!

Learn about electronic music, techniques, and gear on our blog, Signal: https://www.perfectcircuit.com/signal"

Michigan Synth Works Xena (Ambika) TouchOSC Bidirectional Editor v5.0

GENERIC FEATURES:
- Display parameter Name and Value
- Double click a slider or button to reset it to a default value
- MIDI data rate efficient: only sends a MIDI message if the parameter value is incremented or decremented by 1

SPECIFIC FEATURES (FW YAM v190319):
- Page 1: Main
- Page 2: ARP / Sequencer / Pattern
- 179 Program (Part + Sequencer) parameters implemented in the editor. Program parameters are bidirectional using NRPN and SYSEX
- MIDI Channel selection slider
- Bank (change) + Program (change) selection slider + buttons
- Buffer Request and Buffer Init buttons using SYSEX

WORKFLOW 1 EDITING FROM PATCH (starting at 00:06 in the video above):
- Select a Bank & Program
- Press Buffer Request to load it to the editor
- Start editing (the loaded patch) on the editor (the Patch is edited in the synth buffer)
- Press Buffer Request to record it in your DAW / SYSEX librarian; or save it manually in the synth

WORKFLOW 2 EDITING FROM SCRATCH (starting at 04:40 in the video above):
- Press Buffer Init to send an init patch to the synth buffer
- Start editing (the init patch) on the editor (the Patch is edited in the synth buffer)
- Press Buffer Request to record it in your DAW / SYSEX librarian; or save it manually in the synth

LIMITATIONS:
- Program Single (Part + Sequencer) only (no Xena Multi)
- Only 16/32 Pattern / Sequencers steps

EDITOR QUESTIONS?
- NB: The editor is a TouchOSC template (.tosc file), it requires a TouchOSC license (https://hexler.net/touchosc)
- If MSW or anyone has some questions, please contact me via my website:
https://synthnyc.com
- Not for sale / no licensing at this point

MSW-820 LFO Sync

video upload by Michigan Synth Works

"Quick demo of the LFO sync capabilities"

Michigan Synth Works Xena SMR4

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

"Awesome synth. A remake of the Mutable Instruments Ambika. This version has the classic SMR4 filters. Comes with original box and power supply."

You can find demos of Xena in previous posts here.

CLICK FOR MORE »

MSW-820 basic functions, vcos, sync, lfo modulation, cool level attenuverters

video upload by Michigan Synth Works

Follow-up to this post. See it in white there.

Michigan Synth Works MSW-810 Desktop Analog Synthesizer

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

Additional Perfect Circuit listings

CLICK FOR MORE »

Michigan Synth Works MSW-820 Incoming

via Michigan Synth Works

"So several ppl reached out about MSW-830 [see previous posts], and that device is on hold for now.

However! I do have something to announce:

MSW-820
2 VCOs with Saw and Pulse
16 Mode VCF based on the Caveman Totem filter
2 ENV, Noise and syncable LFOs, External In
Onboard MIDI
Eurorackable
Pretty much the analog section from 830.
Coming real soon. Price TBA"

CLICK FOR MORE »

Michigan Synth Works Xena Hybrid Desktop Synthesizer (SVF)

Note: links to listings are affiliate links for which the site may be compensated.

via this listing

Additional Perfect Circuit listings

You can find demos of the Xena in previous posts here.

CLICK FOR MORE »

Michigan Synth Works Xena (4-Pole Filter) 6-voice Hybrid Poly Synth SN 0050

Note: links to listings are affiliate links for which the site may be compensated.

via this Reverb listing

Additional SYNTH CITY Listings

"Xena (4-Pole) is a rework of the legendary Mutable Instruments Ambika DIY synthesizer. Tested in great working condition, includes original box and power supply."

CLICK FOR MORE »

Gnot and Spydur edp clones

video upload by Michigan Synth Works

Caveman Modules Poliroks VCF

video upload by Michigan Synth Works

"Quick overview of the Caveman Modules Poliroks VCF. This filter includes a Low Pass and Band Pass mode, CV Modulation of cutoff frequency and resonance, and built in VCA. $99 USD, fall 2025"

See the announcement post here.

Caveman Modules 3OSC Features

video upload by Michigan Synth Works

"This is a quick demo of the 3OSC VCO. 3 waveforms are available: the 303 Square, Saw, and Tri. The device also features a hard sync where you can sync two or more devices."

See the announcement post here.

Michigan Synth Works CS-01 MIDI kit in action.

video upload by Michigan Synth Works

"Quick demo of the CS-01 being played over MIDI with DR-220 for drums"

Michigan Synth Works & Neutron Sound Presents Caveman Modules: Low Cost High Quality Euro

Caveman Modules is a collaboration between Michigan Synth Works and Neutron sound focusing on affordable, quality modules with unique features and functionality. Caveman Modules are designed to be simple to use and are perfect for musicians just breaking into the eurorack world while still offering higher level functionality for more advanced users.

Check with dealers on the right for upcoming availability.

The Launch Line-Up:

30SC: A voltage-controlled oscillator inspired by the legendary Roland TB-303 with square, tri, and 2 saw outputs. 3OSC also features an innovative hard sync input for chaining multiple units and an FM modulation attenuverter.

Specifications
• Width: 6HP
• Depth: 25 mm
• Current Draw: +12 V: 6mA, -12 V: 6mA
• Price: US$100

CLICK FOR MORE »

2 boring signals into Monsoon and Typhoon

video upload by Audiorial

"2 stupid signals feed Monsoon and Typhoon. Juniper and Neo Trinity generates quantized tensions, and things got less boring and more musically pleasant."

☕ Me soutenir :
✅https://payhip.com/Audiorial
✅Tuto sampling complet : https://payhip.com/b/PO0fq

Why you need Space Echo in your Eurorack and how to play with it live!

video upload by Bastl Instruments

"John Dee from the Bastl Crew performs "Sync Drift" with a Bastl Eurorack setup. This live modular set features the M8 sequencer, Michigan Synthworks MSW810, and Bastl modules including Basil, 1983, Neo Trinity, and Pizza. Watch as John explores synchronized LFO modulation, waveform shaping with the Pizza Oscillator, and real-time tweaking of Basil's delay effects.

► Take a listen to 'Sync Drift':



[Video timeline followec by patch notes]
0:00 - 0:42 - Intro
0:42 - 2:20 - What makes this jam work?
2:20 - 8:22 - Performance
8:22 - 10:36 - After thoughts and reflection
10:36 - 11:04 - Outro

—
PATCH NOTES:

The patch starts with the M8 sending a MIDI sequence to the 1983 to drive two voices. The first routes CV/trigger to Pizza’s V/Oct and Sync inputs, with the CTRL knob set to the internal envelope. The second voice sequences the bassline via the Michigan Synthworks MSW810 CV/GATE inputs.
Neo Trinity handles LFO duties: LFO A/B channels (smoothed random) morph Pizza’s oscillator shape and tweak Cinnamon’s filter cutoff via Aikido, while LFO D/E channels control Basil’s Blur and Speed. Pizza’s main and octave outputs mix through Aikido (Channels C/D) before feeding into Cinnamon’s high-pass filter, which is FM-modulated by LFO B. /možná Neo Trinity's LFO B pro jasnost?/
Basil processes the filtered signal with a synced ping-pong delay, with its Blur and Speed tweaked live alongside Neo Trinity’s LFOs.
Aikido’s VCAs allow for muting and fading of Pizza’s waveforms and modulation depth on the fly, while Bestie outputs the final stereo mix."

Michigan Synth Works Spydur Sequencer

video upload by Michigan Synth Works

"Spydur sequencer with Japser wasp clone, quick run down of the recording and transpose functions"

WALDORF PUSE 2 + MICHIGAN XVI-M

video upload by Gianfranco Carone

You can find details on MICHIGAN SYNTHWORKS' XVI-M here.

Knobcon 2024's Most Impressive Gear

video upload by Jorb

Update: moving this one up for the new gear.

0:00 Intro
1:06 Michigan Synth Works 830
3:24 Infrasonic Warp Core
5:44 GS Music Bree6
7:37 Demon Box
10:13 The Vanilla Synthesizer
11:46 Conclusions (watch out hes getting emotional)