MicroFreak iOS Editor as Surface Builder Panel

video upload by mller30161

"The MicroFreak iOS Editor is a Surface that can be loaded into the "Surface Builder" and is then a fully-fledged Midi Editor for the MicroFreak Synth.

- Controller automation can be recorded in the AU3 plug-in version, in the DAW.
- With the clear editor surface an intuitive working is possible.

Can be used for iPhone and iPad as Standalone and AU3 plugin.

Homepage: https://micro-freak-editor.jimdofree.com"

SH 4d Editor as VST and Standalone Version, for Roland SH-4d Synthesizer

video upload by mller30161

"You can buy it on my Homepage:
https://roland-sh-4d-editor.jimdofree...
Price: 6,90 € / $ 7

Here are my Midi Editor for the Roland SH-4d Synth.
The Roland SH-4d Editor gives you direct access from the DAW to the Roland SH-4d parameters,
allowing you to integrate it into the DAW project.
In the PlugIn VST version you can record the controller movements and so the sound change can be saved.

Editor Features:

- Complex sound changes can be made easily and quickly.
- Change Roland SH-4d Sounds directly from Editor.
- All controllers can be automated.
- X-Y modulation of all parameters
- You can random the Controllers of the Roland SH-4d Synth
- You can use your Roland SH-4d as a sound module in the DAW!

The Editor are available for:
- PC: As VST2 and Standalone for 32bit and VST2, VST3 and Standalone for 64bit Windows.
- MAC: As VST2, VST3, AU and Standalone, compatible with MAC Intel and Silicon."

Elektron Model Samples and Cycles iOS Editor - Mixer- Surface Builder Layer

video upload by mller30161

"Homepage Elektron Model Samples and Cycles iOS Editor: https://elektron-model-samples-editor...

The Elektron Model Samples and Cycles iOS Editor are Surfaces that can be loaded into the "Surface Builder" and is then a fully-fledged Midi Editor for the Elektron Model Samples and Cycles iOS Synths.
- Sound snapshots can be saved and load.
- Controller automation can be recorded in the AU3 plug-in version, in the DAW.
- With the clear editor surface an intuitive working is possible.

Can be used for iPhone and iPad as Standalone and AU3 plugin.

Price 6,70€ / 7 US dollar"

ZEN-Core editor-librarians for Roland Fantom 6-7-8/06-07-08, AX-Edge and Jupiter-X/Xm

video upload by Benedetto Schiavone

B67 ZEN-Core Collection

video upload by

via https://www.benis.it

"After 3 years of development, my ZEN-Core editor-librarians for Roland Fantom 6-7-8/06-07-08, AX-Edge and Jupiter-X/Xm are available, accompanied by a bank of 222 ZEN-Core sounds programmed with the editor and compatible with all Roland Synths, Hardware and Virtual, pianos, GrooveBox, Wind Instruments and Guitar Synths compatible with this standard."

Roland S-1 Editor iOS - Surface Builder - Surface

video upload by mller30161

"Homepage Roland S-1 Editor: https://roland-s-1-editor-soundbank.j...

The Roland S-1 iOS Editor is a Surface that can be loaded into the "Surface Builder" and is then a fully-fledged Midi Editor for the S-1 Synth.
- Sound snapshots can be saved and load.
- Controller automation can be recorded in the AU3 plug-in version, in the DAW.
- With the clear editor surface an intuitive working is possible.

Can be used for iPhone and iPad as Standalone and AU3 plugin."

Behringer PRO-800 TouchOSC Bidirectional Editor v3.0

Behringer PRO-800 TouchOSC Bidirectional Editor v3.0 from synth_nyc on Vimeo.

via synth_nyc

"Global Settings parameters (starting at 03:30 in the video above) are now bidirectional (read / write from / to synth).

Script:
- Press Request to load the synth current Global Settings in the editor
- Start editing (in the editor)
- Press Write to save the Global Settings to the synth
- Re-edit the Global Settings (in the editor)
- Press Request to re-load the synth Global Settings in the editor, to demonstrate that it's the exact same Global Settings as edited a minute ago

Also as requested by some of you folks, I'm providing a free trial version of the editor:
https://www.dropbox.com/scl/fi/1y9ss...bm8o9ykp9&dl=0
- Choose MIDI Channel
- Send Bank and Program Change
- Request any patch from the synth, but only Oscillator A Volume is read
- Write a default patch to the synth (any location), with user chosen Oscillator A Volume
NB:
- Requires a TouchOSC license (https://hexler.net/touchosc)
- Make sure to select "PRO 800" in the TouchOSC application menu / Connections... / MIDI / Connection 1 / Send Port and Receive Port sub menu to enable bidirectional communication

Have fun!
PS: In v3.0, SYSEX strings parsing / encoding procedure has been 'industrialized' which should enable future synth support with minimal effort"

Waldorf Music Pulse 2 Bidirectional Editor for TouchOSC

Waldorf Music Pulse 2 TouchOSC Bidirectional Editor v2.0 from synth_nyc on Vimeo.

via synth_nyc

"The editor is augmented by LUA scripts.

Why TouchOSC?
- It’s OS agnostic (it works on MacOS, Windows, Linux, iOS and Android)
- Hexler has been around since 2007 and in my experience with TouchOSC, it has always been supporting the latest OS

If you have any questions or if Waldorf Music or anyone is interested in licensing it, please contact me via my website: https://synthnyc.com

I’m adding the editor feature list and workflow description below.

Enjoy!

synth_nyc"

CLICK FOR MORE »

GS Music e7 TouchOSC Bidirectional Editor v2.0

GS Music e7 TouchOSC Bidirectional Editor v2.0 from synth_nyc on Vimeo.

via synth_nyc

"The editor is augmented by LUA scripts.

Why TouchOSC?
- It’s OS agnostic (it works on MacOS, Windows, Linux, iOS and Android)
- Hexler has been around since 2007 and in my experience with TouchOSC, it has always been supporting the latest OS

If you have any questions or if GS Music or anyone is interested in licensing it, please contact me via my website:
https://synthnyc.com

CLICK FOR MORE »

Behringer PRO-800 Bidirectional Editor for TouchOSC

Behringer PRO-800 TouchOSC Bidirectional Editor v2.0 from synth_nyc on Vimeo. Audio comes in at 1:30.

via synth_nyc

"The editor is augmented by LUA scripts.

Why TouchOSC?
- It’s OS agnostic (it works on MacOS, Windows, Linux, iOS and Android)
- Hexler has been around since 2007 and in my experience with TouchOSC, it has always been supporting the latest OS

If you have any questions or if Behringer or anyone is interested in licensing it, please contact me via my website:
https://synthnyc.com

How does the PRO-800 sound?
I’m grateful to have owned a SCI Prophet-5 Rev2, a Wine Country Sequential Prophet-5 Rev 3.3 and currently own a SCI Prophet-10 module; the PRO-800 sounds very vintage and close enough to its ancestors IMHO."

CLICK FOR MORE »

Roland S-1 Editor and Soundbank, Soundgenerator

video upload by mller30161

Roland S-1 Synth User Soundbank - Demo Sound - Presets made with S-1 Editor- VST and Standalone


"You can buy it on my homepage:
https://roland-s-1-editor-soundbank.j...
Price: 6,90 € / $ 7
Here are my Midi Editor and Soundbank for the Roland AIRA Compact S-1 Tweak Synth.
The Roland S-1 Editor gives you direct access from the DAW to the S-1 parameters,
allowing you to integrate it into the DAW project.

You can save and reload your sounds, so you can create a sound library of Sounds.
If you need new ideas you can use the 7 different random function (Each synth section has its own random function).

Editor Features:
- Complex sound changes can be made easily and quickly
- All controllers can be automated
- X-Y modulation of all parameters
- Random function for each S-1 Synth section
- You can use your S-1 Synth as a sound module in the DAW
- You can create Soundbanks and insert the sounds into different patterns of the S-1
- Direct access to hidden parameters
- Good overview of all sound parameters
- GUI size can be adjusted as required (zoom)
- Includes a Soundbank with over new 90 Sounds

The Editor are available for:
PC: As VST2 and Standalone for 32bit and VST2, VST3 and Standalone for 64bit Windows.
MAC: As VST2, VST3, AU and Standalone, compatible with MAC Intel and Silicon."

Roland TR-909 & Din Sync RE-909 Editor

via DDV

"This is the app we've all been waiting 40 years for! With this librarian you can avoid the hassles of trying to get Tape Load/Save working on the finicky 909, and still backup, restore and move banks around on your 909 over MIDI!"

Korg Volca Kick Editor and Soundbank as VST and Standalone version

video upload by mller30161

"You can buy it on my homepage:
https://korg-volca-kick-editor.jimdof...
Price: 6,90 € / $ 7
Here are my Midi Editor and Soundbank for the Korg Volca Kick.
The Volca Kick Editor gives you direct access from the DAW to the Kick’s parameters,
allowing you to integrate it into the DAW project.

You can save and reload your sounds, so you can create a sound library of kicks and basses.
If you need new ideas you can use the random function.

In the DAW you can record the controller movements and so the sound change can be saved.

Editor Features:

- Complex sound changes can be made easily and quickly.
- All controllers can be automated.
- X-Y modulation of all parameters
- You can random the Controllers of the Volca Kick
- You can use your Volca Kick as a sound module in the DAW!

The Editor are available for:
- PC as VST2 and Standalone for 32bit and VST2, VST3 and Standalone for 64bit Windows.
- MAC as VST2, VST3, AU and Standalone, compatible with MAC Intel and M1.

Price: 6,90€ / $ 7 (Contains all versions) Download."

Sequential Prophet 5 Rev 4 Editor, VST and Standalone Version

video upload by mller30161

"You can buy it on my homepage:
https://prophet5-editor.jimdofree.com
Price: 6,90 € / $ 7
The Midi Editor for the Sequential Prophet 5 Rev 4.
The Prophet 5 Editor gives you direct access from the DAW to the Prophet 5's parameters,
allowing you to integrate it into the DAW project.
In the PlugIn VST version you can record the controller movements and so the sound change can be saved.

Editor Features:
- Complex sound changes can be made easily and quickly.
- Change Prophet 5 Sounds directly from Editor.
- All controllers can be automated.
- X-Y modulation of all parameters
- You can random the Controllers of the Prophet 5
- You can use your Prophet 5 as a sound module in the DAW!

The Editor are available for:
- PC as VST2 and Standalone for 32bit and VST2, VST3 and Standalone for 64bit Windows.
- MAC as VST2, VST3, AU and Standalone, compatible with MAC Intel and M1."

Patch Base Editor for the Korg Volca FM2 Released

Now available on the Coffeeshopped website.

"This new editor gives you everything that you could do with the first Volca FM, but now you can also fully edit the internal sequencer on the Volca FM2 as well, as well as back up all your Voice and Sequence patches easily."

The editor supports iPad version 3.26 and Mac version 1.20.

Arturia MatrixBrute Editor, VST and Standalone Version

video upload by mller30161

"You can buy it on my homepage:
https://matrixbrute-editor.jimdofree.com
Price: 6,90 € / $ 7
Here are my Midi Editor for the Arturia MatrixBrute Synth.
The MatrixBrute Editor gives you direct access from the DAW to the MatrixBrute's parameters,
allowing you to integrate it into the DAW project.
In the PlugIn VST version you can record the controller movements and so the sound change can be saved.

Editor Features:
- Complex sound changes can be made easily and quickly.
- Change MatrixBrute Sounds directly from Editor.
- All controllers can be automated.
- X-Y modulation of all parameters
- You can use your MatrixBrute as a sound module in the DAW!

The Editor are available for:
- PC as VST2 and Standalone for 32bit and VST2, VST3 and Standalone for 64bit Windows.
- MAC as VST2, VST3, AU and Standalone, compatible with MAC Intel and M1.

Price: 6,90€ / $ 7 (Contains all versions)"

Roland JX 08 Editor and Controller, VST and Standalone Version

video upload by mller30161

"You can buy it on my homepage:
https://jd-08andjx-08-editor.jimdofre...
Price: 6,90 € / $ 7

Here are my Midi Editor for the Roland JX-08 Synth.
With the JX-08 Editor you have direct access to many visible and hide parameters.
The access to the parameters of the JX-08 is possible directly without activating the individual Part A or Part B.
In the PlugIn VST version you can record the controller movements and thus integrate the JX-08 into your DAW project.

Editor Features:
- Only one clear surface on which all 2 Parts can be edited.
- Complex sound changes can be made easily and quickly (No tiny controllers).
- Change JX-08 Sounds directly from Editor.
- All controllers can be automated.
- X-Y modulation of all parameters
- Generate parameters randomly
- It is possible to save Part A and Part B together.
- You can use your JX-08 as a sound module in the DAW!

The Editor are available for:
- PC as VST2 and Standalone for 32bit and VST2, VST3 and Standalone for 64bit system.
- MAC as VST2, VST3, AU and Standalone, compatible with MAC Intel and M1.

Price: 6,90€ / $ 7"

Roland JP-8080 Editor and Librarian for Patch Base

via Coffeeshopped where you can find the editor.

The JP-8080 editor in Patch Base brings all the settings for a full JP-8080 Performance with its 2 Patches into a single editor. You can quickly see the overview of the settings for the Upper and Lower Patches as well as the Velocity and Control Morphing settings for every parameter.

The Upper and Lower tabs each show you a full patch on a single screen. Although the JP-8080 is wonderful for hands-on control, when you load a saved patch you don't really know what any of the settings are on the synth itself. Patch Base makes this easy. You can also copy and paste the Filter and Amp envelopes as well as Randomize or Initialize each individual patch. Individual patches can be saved and loaded, as well as entire Performances, all from one editor.

The Voice Mod tab shows you all of the Voice Mod settings in one place, making it easy to create your own custom patches without any menu diving.

The 2-Up tab shows the most important controls of the Upper and Lower patches side-by-side, for when you're creating Performances that use both patches on the same channel, and you want to compare settings between patches, or quickly copy/paste between patches.

CLICK FOR MORE »

P-600-G VST Editor for the Sequential Circuits Prophet-600

Putting P-600-G to Work: A Cover of "Betrayed in the Octagon" by Oneohtrix Point Never video upload by Mister 1-2-3-4 Programming

"As a use-test of the P-600-G VST3 plugin, I created this cover of "Betrayed in the Octagon" by Oneohtrix Point Never. It uses only sounds generated by the Prophet-600 analog synthesizer enhanced by various effects boxes and plugins. In this video, I scroll through the Reaper project to reveal the various audio and MIDI tracks that were used to recreate the song, and at the end the P-600-G program settings for each voice are displayed."

Setting Up P-600-G in Reaper

"P-600-G is a VST3 plugin designed to be used with the Prophet-600 analog synthesizer, released by Sequential Circuits in 1982. It presents all of the synthesizer’s program parameters in a single editor window within your DAW and allows for the automation of parameter changes. It also lets you store, recall, export, and import program presets, as well as quickly generate new sounds the the Randomize Program Settings dialog. At this time, P-600-G is only fully-functional within Cockos’ Reaper and Steinberg’s Cubase (Windows OS only). This video explains how to set up the plugin in Reaper.

P-600-G is distributed free and open source under the GPL v3 license. You can download it and get more information about it at https://programming.mr1234.com/

If you find the plugin useful, please consider making a donation at the same website to support further development!

THIS PLUGIN DOES NOT GENERATE AUDIO. It simply provides editing and automation capabilities for the Prophet-600 hardware. If you do not possess that synthesizer, the plugin is of no use to you. This plugin is not compatible with any third-party modification of the Prophet-600’s firmware."

Dave Smith Instruments Tetra Editor and Librarian for Patch Base

via Coffeeshopped

"The latest releases of Patch Base include an editor for a desktop analog powerhouse: the DSI Tetra. It can be a 4-voice polysynth, or an 8-oscillator monosynth, and a lot of other things in between. With all of that flexibility and not a lot of knobs, a good editor is crucial."

"Patch Base has the best Dave Smith Instruments Tetra editor and librarian available for Mac and iPad. Edit any parameter, organize patches, create random patches, and more.

Voice Editor

Edit every voice parameter on your DSI Tetra in real-time. Adjust and fine-tune the oscillators, filter, envelopes, LFOs, and modulation capabilities that the Tetra offers:

Visualize and edit all of the hundreds of parameters in a Tetra voice
Quick editing of all sequencer tracks, with randomization and copy/paste functionality
Copy/paste envelopes for ease of editing
Copy/paste/initialize/randomize all of Layer A or B

Combo Editor
All of the features in the Voice editor are also available for editing Combos. Easily visualize all 4 parts of a Combo, and edit any parameter.

Parts of a Combo (layers) can be copy and pasted, as well as loaded from your Tetra Voice library. Individual parts can also be saved out as new Voice patches. Pull interesting voices out of Combo presets, and build new Combos from parts of old ones.

Bank Editors
Edit and organize all of the Tetra's 512 stored Voices and 128 stored Combos. Patch Base gives you direct access to all banks, so you can organize them and back them up to files on your device.

Patch Librarian
Save your patches and banks as files on your iPad or Mac: Patch Base saves files as sysex that can be sent to your synth by Patch Base or any general-purpose sysex transfer app.

Organize your sounds: Create folders to organize your patches and banks.
iCloud integration: Optionally use iCloud to make your patch files accessible on any iCloud-connected device, and to automatically sync files between Patch Base on Mac and iPad.
Import sysex files: Import existing patch and bank sysex files to Patch Base. On Mac, simply drop your files into the Patch Base browser. On iPad, easily import using iCloud or the Files app."

Virtual ROLAND GAIA Software Programmer for LOGIC v4 - X

Available on Reverb and eBay

"This software is a virtual ROLAND GAIA programmer for use with the Roland GAIA polyphonic synthesizer. It simulates a hardware programmer in a software environment within the APPLE LOGIC audio / sequencer program (formerly Emagic LOGIC). To use this software you MUST have a valid copy of LOGIC on your computer (see below) as well as a USB cable or MIDI interface which connects your computer via cable to your GAIA synthesizer. This software CANNOT be used as a stand alone application under any circumstances. It will not run in Reason, Ableton, AU, VST or any other plug-in format. It was created and is presented through use of the LOGIC “environment” architecture.

Upon purchase, you will ultimately receive a ZIP archive of the editor you purchased for Logic. UNZIP this archive and you will have a choice of LOGIC song documents (v9 > vX) you can now open in the Logic program (please send special request for versions pre-v9 or PC if you require them). Once open, you will see the editor on your screen and you can then discover the pleasures of a virtual GAIA programmer for your synth.

FEATURES:

* Remote control of all front panel functions of the GAIA and other non-panel functions in realtime
* Designed for single or selectable multi-oscillator control from one master control panel
* Remote access to many relevant Global functions
* Recordable moves in realtime to your Logic sequencer for dynamic integration into sequences
* Audition Keyboard
* Patch RESET function for initialized patch and FX parameters
* Provides patch selection access to all 16 channels of Roland’s included GM sound module

All real time moves are recordable by the Logic sequencer for repeatable real time changes on playback - or you can automate using HYPERDRAW. You may also remotely control these SYSEX faders and buttons via a hardware control surface if you take the time to tailor the controls to suit your individual hardware. This is not difficult to do and needs only be done once and then saved for future sessions.

The editor consists of two programmer pages and resides in one layer of the LOGIC environment hierarchy in it's own SONG document. Importable to your own personal AUTOLOAD song for automatic pre-load before any new session."

CLICK FOR MORE »