iTG33 iPad Editor Now Available

YouTube Published on Jun 24, 2012 by iControlMIDI

"Apple has just released iTG33 iPad editor, our dedicated iControlMIDI iPad editor for the Yamaha TG33.

The TG33 is a great sounding synth but very hard to program.

iControlMIDI for the TG33 implements all the Voice parameters including Vectors.

The TG33 can be edited using the following Pages on iControlMIDI:
• Page 1: Common parameters and FX parameters
• Page 2: TONE A parameters
• Page 3: TONE B parameters
• Page 4: TONE C parameters
• Page 5: TONE D parameters
• Page 6: VECTOR Level 1-7 parameters and VECTOR Level Speed parameter
• Page 7-13: VECTOR Level 8-50 parameters
• Page 14: VECTOR Detune 1-7 parameters and VECTOR Detune Speed parameter
• Page 15-21: VECTOR Detune 8-50 parameters
• Page 22: Common Name parameters

To offer a better workflow, iControlMIDI will:
• iControlMIDI automatically enables the ENV parameters if ENV Type is equal to USER
• iControlMIDI automatically disables the ENV parameters if ENV Type is different than USER
• iControlMIDI automatically enables the TONE C and TONE D Pages and Vector X parameters if Configuration is equal to A-B-C-D
• iControlMIDI automatically disables the TONE C and TONE D Pages and Vector X parameters if Configuration is equal to A-B"

iTunes:
iTG33 - iControlMIDI
iPads on eBay

Accessing the Casio CZ Series Hidden Waveforms

Note: Auction links are affiliate links for which the site may be compensated.
Accessed via the iCZ - iControlMIDI (iTunes) Casio CZ series editor on iPad.
Quick tutorial: The Casio CZ series are Phase Distortion synths - Casio's version FM synthesis. With Yamaha FM synthesis there are carrier waveforms and modulator waveforms. The carrier is what you hear and the modulator modulates. The DX7 has various combinations of them modulating each other referred to as algorithms. On the CZ series, and referenced below, Waves are carriers and "Window Waves" are modulators.

"We are using a Line 1 + Line 2' structure, but not using both Lines at the same time. Line 1 DCO Wave 1 is Null (Hidden Wave); Line 1 DCO Wave 2 is Sine Sync and Line 1 Window Wave is Triangle. Line 2 DCO Wave 1 is Double Sine; Line 2 DCO Wave 2 is Off and Line 2 Window Wave is Spike (Hidden Wave).
In the first part, only Line 1 can be heard.
In the second part, we are using iControlMIDI increase the DCW1 Level 1 to max which makes the Window Modulation sounds like a resonant filter.
In the third part and last, we are using iControlMIDI to add Line 2' (so with Detune) and you can hear the Window Wave Spike effect which almost sounds like a distortion whereas the Line 2 DCO Wave 1 Double Sine sounds like a back-end sawtooth.
There is a very short software delay and software chorus."

iTunes:
iCZ - iControlMIDI
iPads on eBay

Note: Auction links are affiliate links for which the site may be compensated.
YouTube Published on Jun 3, 2012 by iControlMIDI

"Apple has just released iCZ iPad editor, our dedicated iControlMIDI iPad editor for the CZ series: CZ-101 CZ-230S CZ-1000 CZ-2000S CZ-2600S CZ-3000 CZ-5000 and CZ-1.

The CZ series are great sounding synths but very hard to program.

iControlMIDI implements all Timbre Data parameters including Hidden Parameters in a workflow efficient way that will enable you to create never heard before sounds.

CZ can be edited using the following Pages on iControlMIDI:
• Page 1: DCO1, Detune, Modulations parameters and SEND IT button
• Page 2: DCW1 parameters and SEND IT button
• Page 3: DCA1 parameters and SEND IT button
• Page 4: DCO2 parameters and SEND IT button
• Page 5: DCW2 parameters and SEND IT button
• Page 6: DCA2 parameters and SEND IT button
• Page 7: Vibrato, Octave Transpose parameters and SEND IT button

To offer a better workflow, iControlMIDI will:
• Automatically enable the DETUNE parameters if STRUCTURE Detune Line 1 + Line 1’ or Line 1 + Line 2’ is selected on iControlMIDI and vice-versa
• Automatically enable the Line 1 parameters and Pages if STRUCTURE Detune Line 1 or Line 1 + Line 1’ is selected on iControlMIDI and vice-versa
• Automatically enable the Line 2 parameters and Pages if STRUCTURE Detune Line 2 or Line 1 + Line 2’ is selected on iControlMIDI and vice-versa
• Automatically enable the Envelop Rates and Levels parameters based on EV POINT End selection and vice-versa
• Automatically enable the STRUCTURE Modulation parameter if STRUCTURE Detune Line 1 + Line 1’ or Line 1 + Line 2’ is selected on iControlMIDI and vice-versa"

iTunes:
iCZ - iControlMIDI
iPads on eBay

Octave Plateau Voyetra 8 SN L04813

Note: Auction links are affiliate links for which the site may be compensated. via this auction

"This is the full rev 4 version with the Digimod board and rev 4 software.

It responds to midi pitch and modulation commands from any modern midi controller so there is no need for the original VPK-5 keyboard. It can also be programmed from intuitive programs like icontrolmidi and Sound Quest.

This is the last and best version of the synth. I feel they really got it right with this version. It has every desirable feature you could possible want in a Voyetra 8. It was purchased directly from Peter Lanzilotta at Double-Take in New York in 1997 and has worked perfectly ever since. It has been used regularly and well taken care of. As you can see from the photos it is in excellent cosmetic condition. The only noticeable cosmetic issue is one bent heatsink fin. There are a few insignificant marks in the textured metal housing. The face of the unit is amazingly clean."

CLICK FOR MORE »

JD-990: Super JD Ringer - iControlMIDI for iPad Audio Demo

Note: Auction links are affiliate links for which the site may be compensated.

"We are using a 4 Tones Patch with Ring Modulation, but not using all Tones at the same time. Tone A is Wave 195: Loop 4, Tone B is Wave 10: Pulse Mod, Tone C is Wave 144: Syn Vox 2, Tone D is Wave 3: FAT Saw.

In the first part, only Tone B and D can be heard, then we are using iControlMIDI to fade-in Tone A TVA Level which makes the Ring Modulation effect kicks in.
In the second part, we are using iControlMIDI to fade-out Tone A TVA Level and Unmute Tone C.

In the third part, we are using iControlMIDI to change Tone C pitch one semitone at a time, creating a glissando effect.
In the fourth and last part, we are using iControlMIDI to fade-in and fade-out Tone A TVA Level.

There is a very short software delay, software chorus and a high-end hardware reverb."

iTunes:

iJD-990 - iControlMIDI
iPads on eBay

iJD-990 iPad editor now available

Note: Auction links are affiliate links for which the site may be compensated.
YouTube Published on May 10, 2012 by iControlMIDI


"Apple has just released our dedicated iControlMIDI iPad editor for the JD-990, namely iJD-990.

The JD-990 is great sounding synth but very hard to program.

iControlMIDI is the solution, the JD-990 can be edited using the following Pages:
• Page 1: PATCH Tone A&B Structure and Tone C&D Structure parameters
• Page 2: PATCH General and TONE A, B, C and D Mute switches parameters
• Page 3: PATCH Portamento and EQ parameters
• Page 4: PATCH Key Range and Velocity Range parameters
• Page 5: TONE A Wave Generator parameters
• Page 6: TONE A Pitch parameters
• Page 7: TONE A TVF parameters
• Page 8: TONE A TVA parameters
• Page 9: TONE A LFO / MIDI parameters
• Page 10: TONE A Modulation Matrix parameters
• Page 11-16: TONE B parameters
• Page 17-22: TONE C parameters
• Page 23-28: TONE D parameters
• Page 29: PATCH FX parameters and SYSTEM FX On/Off switches parameters
• Page 30: PATCH FX Group A parameters
• Page 31: PATCH FX Group B parameters
• Page 32: PATCH Name parameters

To offer a better user experience, iControlMIDI offers:
• A graphical representation of the 6x2 structures
• TONE A, B, C and D Mute switches parameters
• SYSTEM FX On/Off switches parameters
• Some numerical parameter values in semitones, notes, percentage, ms, Hz or dB rather than plain numbers"

iTunes:
iJD-990 - iControlMIDI

iPads on eBay

DSI Mopho - 80s ARP

"We are using the 2 Sub Oscillators and the ARP 2-octave up & down to create the sound; then sequencing 2 notes, 1 octave apart which is creating the 3 octaves sequence basis.
The first part of the sequence, only DCO 1 can be heard.
The second part of the sequence, we are using iControlMIDI to slowly move the DCO Mix towards DCO 2; which has a high pitched Oscillator modulated by LFO 1.
The third part of the sequence, we are using iControlMIDI to change the LFO1 Waveform from Square to Random, then back to Square.
The fourth and last part of the sequence, we are using iControlMIDI so fade out the VCA.
There is a high end (hardware) reverb.
There is no drum machine and only one track / one sound."

iMopho1 v1.2 CoreMIDI iPad Editor Now Available

YouTube Uploaded by iControlMIDI on Mar 16, 2012

"Apple has released iMopho1 v1.2 our Wired and Wireless CoreMIDI iPad Editor for DSI Mopho module / keyboard.

iControlMIDI for the Mopho offers all the Program parameters.

iControlMIDI displays some numerical parameter values in semitones, cents, notes, ms, Hz or BPM rather than plain numbers.
Like a hardware step sequencer, the used steps are lighten up by iControlMIDI.

In order to offer an even faster workflow:
• iControlMIDI automatically enables the Mopho Module / Keyboard parameters and value lists based on Page 0 Synth selection
• iControlMIDI automatically disables the Mopho Module / Keyboard parameters and value lists based on Page 0 Synth selection
• iControlMIDI automatically enables the some parameters based on other parameters values
• iControlMIDI automatically disables the some parameters based on other parameters values

The Mopho can be edited using the following Pages:
• Page 0: MIDI channel selection and Mopho Module / Keyboard selection
• Page 1: Global parameters
• Page 2: Program DCO1 and DCO2 parameters
• Page 3: Program VCF and VCF Envelop parameters
• Page 4: Program VCA and VCA Envelop parameters
• Page 5: Program LFO parameters
• Page 6: Program Envelop3 parameters
• Page 7: Program Modulation Matrix, ARP and Sequencer Modulations parameters
• Page 8: Program Velocity, Modulation Wheel, Pressure, Breath Controller and Foot Controller Modulation parameters
• Page 9: Program Sequencer 1 and 2 parameters
• Page 10: Program Sequencer 3 and 4 parameters
• Page 11: Program Naming"


iPads on eBay
iPads on Amazon

DSI Mopho - 80s ARP by iControlMIDI
"Here is another example of how you can realtime control sounds with iControlMIDI.
We are using the 2 Sub Oscillators and the ARP 2-octave up & down to create the sound; then sequencing 2 notes, 1 octave apart which is creating the 3 octaves sequence basis.
The first part of the sequence, only DCO 1 can be heard.
The second part of the sequence, we are using iControlMIDI to slowly move the DCO Mix towards DCO 2; which has a high pitched Oscillator modulated by LFO 1.
The third part of the sequence, we are using iControlMIDI to change the LFO1 Waveform from Square to Random, then back to Square.
The fourth and last part of the sequence, we are using iControlMIDI so fade out the VCA.
There is a high end (hardware) reverb."

iM1R v1.2 Now Available - iBlofeld v1.2.1 and iMopho1 v1.2 Coming Soon

YouTube Uploaded by iControlMIDI on Feb 19, 2012

"Apple has released iM1R v1.2 our Wired and Wireless CoreMIDI iPad Editor for Korg M1 / M1R / EX M1 / EX M1R.

iBlofeld v1.2.1 and iMopho1 v1.2 had been submitted to Apple for approval and are at the 'Waiting for Review' status.

iBlofeld v1.2.1 will be a major upgrade from v1.2 it will offer the following key features:
• All ARP parameters including User Pattern Steps 1 to 16
• All FX paramaters with dynamic allocation of FX parameters name and value based on FX Type selection

iMopho1 v1.2 will be our dedicated editor for the DSI Mopho module and Mopho keyboard, it will offer the following key features:
• Module / Keyboard selection
• Automatic enabling of Module / Keyboard parameters and values based on this selection

Screen shots of iBlofeld v1.2.1 and iMopho1 v1.2 can be found on our website, as well as an exhaustive feature list. http://icontrolmidi.com/

iM1R offers all the M1 PROGRAM parameters (including Oscillator Mode Single, Double and Drums and FX1 / FX2).

The M1 series can be edited using the following Pages:
• Page 1: OSC1, FX1 and FX2 Types parameters
• Page 2: OSC1 Pitch Envelop and Modulations
• Page 3: OSC1 VDF, VDF Envelop and Modulations
• Page 4: OSC1 VDA, VDA Envelop and Modulations
• Page 5: LFO, Aftertouch and Controller Modulations
• Page 6: FX1 and FX2 parameters -dynamically change based on FX Types selection on Page 1-
• Page 7: OSC2 parameters
• Page 8: OSC2 Pitch Envelop and Modulations
• Page 9: OSC2 VDF, VDF Envelop and Modulations
• Page 10: OSC2 VDA, VDA Envelop and Modulations"


iPads on eBay
iPads on Amazon

iWSeq Korg Wavestation Wave Sequencing CoreMIDI iPad Editor Now Available

YouTube Uploaded by iControlMIDI on Sep 22, 2011

iWSeq - iControlMIDI
iPads on eBay

"Apple has released iWSeq v1.2 our Wired and Wireless CoreMIDI Wave Sequencing iPad Editor for Korg Wavestation / Keyboard / EX / AD / SR.

iWSeq v1.2 offers:
• WSeq can be used as a self contained application or complementing iWavestation our Korg Wavestation Vector Synthesis editor
• Possibly the best workflow would be to use iWSeq to create one (or more) Wave Sequence and then use it in iWavestation as a Wave source (A, B, C or D) to Vector Synthesis for incredible and unique evolving pads...
• All the WAVE SEQUENCING parameters (not the PATCH, GLOBAL, MIDI, FX, PERFORMANCE nor MULTI parameters).
• Up to 20 Wave Sequence Steps editing as recommended by Korg. You need to remember that you can only edit the Wave Sequences in the Wavestation RAM (there is no buffer, so editing is destructive) and not the ROM; and that each RAM bank has 32 Wave Sequences and a RAM bank can hold up to 500 Wave Sequence Steps total (averaging 16 Steps per Wave Sequence).

In order to offer an even faster workflow:
• iControlMIDI automatically enables the Wave Sequence Steps Pages based on the number of Wave Sequence Steps (4, 8, 12, 16 or 20) you chose.
• iControlMIDI automatically disables the Wave Sequence Steps Pages based on the number of Wave Sequence Steps (4, 8, 12, 16 or 20) you chose.

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: Wave = Saw; Filter cutoff frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the Wavestation LCD
• Value (ex: Saw): as displayed on the Wavestation LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iWSeq - iControlMIDI
iPads on eBay

Update: iWSeq is now iWaveSeq: iWaveSeq - iControlMIDI

All iControlMIDI Apps are qualified with Line 6 MIDI Mobilizer II

"All iControlMIDI Apps are qualified with the recently released Line 6 MIDI Mobilizer II iPad CoreMIDI MIDI interface.

This is the 3rd iPad CoreMIDI MIDI interface qualified with all iControlMID Apps, in addition to the following:
• Apple Camera Connection Kit + HDE USB MIDI Cable Converter PC to Music Keyboard
• Yamaha i-MX1

In addition, you can use the iControlMIDI FREE MIDIProtocolTester App to assess if your CoreMIDI compliant iPad MIDI interface is compatible with iControlMIDI.""

iControlMIDI - iTunes
iPads on eBay

iMicron v1.2 Wired and Wireless CoreMIDI iPad Editor Now Available‏‏‏

YouTube Uploaded by iControlMIDI on Aug 30, 2011

"Apple has released iMicron v1.2 our Wired and Wireless CoreMIDI iPad Editor for Alesis Micron v1.10.

iMicron v1.2 offers:
• All the Program parameters and all the real Micron parameter values as displayed on its LCD, for example:
• Filter Cutoff Frequency in Hertz
• Envelop Times in milliseconds and seconds
• LFO and S&H Fixed Rate in Hertz

In order to offer an even faster workflow:
• iMicron automatically enables the some parameters based on other parameters values
• iMicron automatically disables the some parameters based on other parameters values

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: Wave = Saw; Filter cutoff frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the Micron LCD
• Value (ex: Saw): as displayed on the Micron LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iMicron - iControlMIDI - iTunes
iControlMIDI - all editors on iTunes
iPads on eBay
iPod Touch on eBay

iWavestation v1.2 Wired and Wireless CoreMIDI iPad Editor Now Available‏

YouTube Uploaded by iControlMIDI on Aug 19, 2011

"Apple has released iWavestation v1.2 our Wired and Wireless CoreMIDI iPad Editor for Korg Wavestation keyboard / EX / AD / SR.

iWavestation v1.2 offers:
• All PATCH parameters
• Automatically enables the Wave C, B or D parameters based on the Wave Structure parameter values (1, 2 or 4 Oscillators)
• Automatically disables the Wave C, B or D parameters based on the Wave Structure parameter values (1, 2 or 4 Oscillators)

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: Wave = Saw; Filter cutoff frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the Wavestation LCD
• Value (ex: Saw): as displayed on the Wavestation LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iWavestation - iControlMIDI
iPads on eBay

Update: iWavestation is now iWaveVS:
iWaveVS - iControlMIDI

iD-550 v1.2 Wired and Wireless CoreMIDI iPad Editor Now Available‏

YouTube Uploaded by iControlMIDI on Jul 27, 2011

"Apple has released iD-550 v1.2 our Wired and Wireless CoreMIDI iPad Editor for Roland D-50 / D-550.

iD-550 v1.2 offers:
• all TONE parameters
• all PATCH parameters

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; TVF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the D-550 LCD
• Value (ex: Saw): as displayed on the D-550 LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iD-550 - iControlMIDI
iControlMIDI
iPads on eBay

iEvol v1.2 Wired and Wireless CoreMIDI iPad Editor Now Available

YouTube Uploaded by iControlMIDI on Jun 16, 2011

"iEvol v1.2 offers:
• Some parameter values in ms or Hz or BPM rather than plain numbers
• Like a hardware step sequencer, the used steps are lighten up

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as written on the Evolver control panel
• Value (ex: Saw): as written on the Evolver user manual / display, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iEvol - iControlMIDI - iTunes
iControlMIDI - iTunes
iPads on eBay

iFSeq v1.2.1 and iFS1R v1.2.2 Wired and Wireless CoreMIDI Editor Now Available

"Apple has just released iFSeq v1.2.1, our dedicated FS1R Formant Sequencing Synthesis editor / add-on to iFS1R, and also iFS1R v1.2.2. [pictured]

iFS1R v1.2.2 offers [iFS1R - iControlMIDI]:
• Editing in Part 1 or 2 or 3 or 4
• Graphical representation of the 88 algorithms; just touch an algorithm icon on iFS1R, it is selected on your FS1R, no needs for the FS1R user manual any longer."


YouTube Uploaded by iControlMIDI on Jul 31, 2011

"iFSeq v1.2.1 offers [iFSeq - iControlMIDI]:
iFSeq can be used as a self contained application or complementing iFS1R, our FS1R FM Synthesis editor.
iFSeq provided all the Formant Sequencing parameters:
• Performance
• Voiced and Unvoiced Operators
Plus we duplicated from iFS1R the key Formant Sequencing synthesis Operators parameters that have a crucial sonic impact like:
• FSeq On/Off switch
• Track Number
• Skirt
• Transpose
• Resonance
• Algorithm (normally you should use Algorithm 1 for Formant Sequencing synthesis, but we let you experiment with all 88 algorithms)
• Feedback (normally you should set Feedback = 0 for Formant Sequencing synthesis, but we let you experiment with all 8 values)
All other parameters can be edited on iFS1R if you wish do have in depth experience.

We completely automated the Formant Sequencing synthesis workflow in order to put your FS1R to ‘re-synthesis mode’, when you assign the Formant Sequencer to Performance Part N (N=1, 2, 3 or 4 as selected on the Settings page) on iFSeq, iFSeq will automatically:
• Assign the Formant Sequencer to Performance Part N (N=1, 2, 3 or 4 as selected on the Settings page)
• Assign all Voiced Operator Waveform to Formant (you should only use Formant waveforms if you wish to do Formant Sequencing synthesis, but this can be individually changed on iFS1R)
• Assign all Voiced and Unvoiced Operator FSeq switches to On (this can be individually turned On/Off on iFSeq subsequent Pages)"

iControlMIDI - editors on iTunes
iPads on eBay

MIDIProtocolTester By iControlMIDI

"MIDIProtocolTester is a FREE tool to help you assess if your DAW, USB MIDI Class compliant device and CoreMIDI compliant iPad MIDI interface are compatible with iControlMIDI.

MIDIProtocolTester is based on the same code as all our iControlMIDI iPad editors.

If MIDIProtocolTester works for you, there are 99% chances that our iPad editors will work with your DAW, USB MIDI Class compliant device and CoreMIDI compliant iPad MIDI interface.

We had and will qualify some hardware with iControlMIDI iPad editors, but we cannot qualify every single ones.

MIDIProtocolTester will send:
• MIDI Control Change parameter - CC (Volume to 127)
• MIDI Non Registered Parameter Number – NRPN (Prophet VS Filter Cutoff to 127)
• MIDI System Exclusive parameter - Sysex (MKS-50 Filter Cutoff to 127)
…on the MIDI channel you have selected.

We have listed the iControlMIDI MIDI Protocol(s) used for a given editor on the FAQ page (FAQ #12).

So you can check if your favorite software and hardware can:
• Route (MIDI In to MIDI Out)
• Pass-through (MIDI Thru)
• Record
• Play
…those messages.

There are tools to help you monitor MIDI activity on your Mac or PC. We encourage you to use them."

MIDIProtocolTester - iControlMIDI
iPads on eBay

iESQ-1 v1.2 Wired and Wireless CoreMIDI iPad Editor & New Prices

YouTube Uploaded by iControlMIDI on Jul 14, 2011
iESQ-1 - iControlMIDI
iControlMIDI
iPads on eBay


"Apple has released iESQ-1 v1.2 our Wired and Wireless CoreMIDI iPad Editor for Ensoniq ESQ-1 / ESQ-M.

We are also pleased to announce a price drop on most of our editors to meet market demand.

iESQ-1 v1.2 offers:
• Automatically enables the some parameters based on other parameters values
• Automatically disables the some parameters based on other parameters values

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the ESQ-1 VFD
• Value (ex: Saw): as displayed on the ESQ-1 VFD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iMemorymoog v1.2.1 Wired and Wireless CoreMIDI iPad Editor Now Available

"Apple has released iMemorymoog v1.2.1 our Wired and Wireless CoreMIDI iPad Editor for Moog Memorymoog LAMM.

iMemorymoog v1.2.1 offers:
• Reverse On / Off switches to 'normal' mode; ie On to the right, Off to the left, to overcome a non conventional MIDI implementation and provide a better workflow.

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: VCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: OSC): as displayed written on the Memorymoog user manaual / control panel
• Value (ex: Saw): as displayed on the Memorymoog user manaual / control panel, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"

iMemorymoog - iControlMIDI
iPads on eBay

iJX-8P Wired and Wireless CoreMIDI iPad Editor Now Available

YouTube Uploaded by iControlMIDI on May 22, 2011

iJX-8P - iControlMIDI
iPads on eBay

"Apple has released iJX-8P our Wired and Wireless CoreMIDI Editor for Roland JX-8P.

iJX-8P v1.2 offers:
• All TONE parameters
• All PATCH parameters

4-Controls per Parameter:
• Slider: full range parameter value adjustment for a ‘coarse’ workflow
• + button: precise +1 parameter value adjustment for a ‘fine’ workflow
• - button: precise -1 parameter value adjustment for a ‘fine’ workflow
• Parameter default value button: pressing the parameter value label / button sets this parameter to a default value for a faster workflow (ex: DCO wave = Saw; VCF frequency = wide open; etc...)

Parameter Name and Value:
• Name (ex: Wave): as displayed on the JX-8P LCD
• Value (ex: Saw): as displayed on the JX-8P LCD, dynamically changes when you use one of the 4 controls (slider, + button, - button, parameter default value button)"