Haken Continuum EaganMatrix Programming Tutorials

Published on Apr 24, 2016 EaganMatrix Programming

Playlist:
1. Haken Continuum EaganMatrix Programming Session 1 - Predefined Formulas
2. Haken Continuum EaganMatrix Programming Session 2 - Simple Formulas
3. Haken Continuum EaganMatrix Programming Session 3 - Barrels
4. Haken Continuum EaganMatrix Programming - Session 4
5. Haken Continuum EaganMatrix Programming - Session 5 - Shape Generators
6. Haken Continuum EaganMatrix Programming - Session #6 - Using the CVC
7. Haken Continuum EaganMatrix Programming Session 7 - Pedals
8. Haken Continuum EaganMatrix Programming Session8 - TEC Breath Controller
9. Haken Continuum EaganMatrix Programming - Session 9 - Simple Filters and Noise
10. Haken Continuum EaganMatrix Programming Session10 - Continuum as Audio DSP
11. Haken Continuum EaganMatrix Programming Session11 - Creating a Simple Organ
12. Initial Reactions Building Peter Pringle's Keyboard Extension for the Haken Continuum

EaganMatrix Programming for Osmose - Initial Concepts

video upload by EaganMatrix Programming

"Initial video comparing Haken Continuum to Osmose and showing the basic Osmose specific programming techniques that form the basis for more complex preset construction. No prior EaganMatrix programming experience is required but basic EaganMatrix programming knowledge will help a bit. If this causes any confusion search pout the initial EaganMatrix programming videos here and start watching them as 90% of EaganMatrix programming is identical between Continuum and Osmose. This video stresses the Osmose specific use cases for Pressure (Z) and Aftertouch (Y) and goes into a lot of fundamental discussion as well as only a single Oscillator is used for discussion. But the video touches on most of the top-level programming techniques that you will find in Osmose presets.

The EaganMatrix preset that goes with this video can be found here: https://patchstorage.com/osmose-initi..."

New Haken Continuum EaganMatrix Programming Tutorials

For those interested the following videos have been added to the main Haken Continuum EaganMatrix Programming Tutorials playlist here.

10. Haken Continuum EaganMatrix Programming Session10 - Continuum as Audio DSP
11. Haken Continuum EaganMatrix Programming Session11 - Creating a Simple Organ
12. Initial Reactions Building Peter Pringle's Keyboard Extension for the Haken Continuum

Haken Continuum / EaganMatrix - Four-Note Arpeggiator & Using ContinuuMini with uCVC/CVC

Haken Continuum / EaganMatrix - Creating a Simple Four-Note Arpeggiator - EaganMatrix Programming

"Experimenting today creating a simple four note Arpeggiator in the EaganMatrix. This preset lets you define four tones that are settable in real time using the i, ii, ii and iv controls. Four notes are always played but you could vary that with extra programming. Y induces some octave shifts and a fifth too that you can press with multiple fingers to play the tones polyphonically at the octave - but the tones themselves are not produced by X (but by the controls). Added Speed control and put a couple continuous pedals on two of the controls to change the pitch sequence with your feet. But the real fun comes when you connect a Keith McMillen Softstep 2 and program chord changes - as the Softstep lets you change all four of the i, ii, ii and iv controls together with the press of a foot or hand. I added some balloons as well to summarize the few steps used to create the preset."

Haken Continuum / EaganMatrix - Using ContinuuMini with uCVC/CVC (Control Voltage interfaces)
EaganMatrix Programming

"Discusses how to connect and use a ContinuuMini (also Half/Full and Slim Continuums) with the Haken Audio Continuum Voltage Converter and especially the Evaton Technologies uCVC for playing Monophonic synths and modules (though playing polyphonically will be similar - just use more CVC channels in parallel with preset Polyphony set greater than 1. Here using a Moog Slim Phatty as the instrument being played by CV - but could be any synth or Eurorack or other module that accepts CV inputs. Also introduces EaganMatrix CVC programming that is essential in using CV with non-standard CV interfaces."

Haken Continuum EaganMatrix Programming

Published on Mar 21, 2018 EaganMatrix Programming

Playlist:

1. Haken Continuum EaganMatrix Programming - Wave Banks Part 1 - Sine Bank of 5 Oscillators

"Create a simple Additive Synthesis engine using the Continuum's five Oscillators as a configurable Sine Bank."

More to come...

Haken Audio ContinuuMini & EaganMatrix Tutorials

Published on Jan 26, 2019 EaganMatrix Programming

Current playlist:

1. Haken Audio ContinuuMini & EaganMatrix Basics

An intro to using the fantastic new Haken Audio ContinuuMini with the EaganMatrix Editor/Sound Engine. Also discusses connecting up a Kenton KillaMix MIDI controller and Arturia BeatStep Pro and BeatStep MIDI controllers.

2. Haken Audio EaganMatrix Fundamentals for ContinuuMini - Part 1

The second video discussing the ContinuuMini and the EaganMatrix editor. A top level "Grand Tour" of the Haken Continuum's EaganMatrix geared for ContinuuMini owners. Discusses the top part of the matrix that centers on system functions. Part 2 will address Performance Control and Preset Programming areas.

3. Haken Audio ContinuuMini & EaganMatrix Fundamentals - Part 2

"Grand Tour" review of the performance controls and top level view of the EaganMAtrix matrix used to create presets - all geared for ContinuuMini users.

Haken Audio: Eurorack-based CVC (Control Voltage Converter) Summary

video upload by EaganMatrix Programming

"Here's a summary of the new Eurorack CVC card now available from Haken Audio for use with all EaganMatrix based instruments running 10.61 or later firmware (currently does not support Osmose as it is running 10.52 DSP firmware). This is 100% compatible with the function of the previous Stand-alone CVC but now can be placed in your Eurorack chassis - or it can be ordered as a stand-alone unit that comes in a small 5V USB-C powered enclosure. Supports 4 channels (voices) of WXYZ CV as did the previous models. A dual version is also available using two Eurorack CVCs that can give you 8 voices of WXYZ CV outputs (either as a pre-constructed enclosed unit or as two separate modules that can be joined with a connection kit allowing you to place them in your Eurorack chassis. What a great new addition for Eurorack and Haken Audio instrument owners."

EaganMatrix 10.61/10.62 Firmware Testing with Multiple Instruments & CVC

video upload by EaganMatrix Programming

"Testing a number of the 10.61/10.62 EaganMatrix firmware MPE + CV interfaces with Haken Continuum, EaganMatrix Eurorack Modules, ContinuuMini, Osmose (as MPE controller running older 10.52 firmware) and the new Eurorack based Control Voltage Converter (CVC). Everything seems to be programmed and outputting as expected. A great set of Haken Audio products now available supporting the new features of this firmware (mostly ability to program independent Master Section parameters, support for new CVC and ability to run Microtonal Tuning grids again - plus a few other features detailed in the 10.61 Continuum manual)."

DualWavebank Overlay for Osmose and Electra One MK2 Controller Features Summary

video upload by EaganMatrix Programming

"A video describing the features of the soon to be released Beta version of the Dual WaveBank Overlay for Electra One (MK2) controller - that abstracts EaganMatrix programming and lets you concentrate on configuring sounds using controls you are used to (in fact you could never program these features into a single EaganMatrix preset on the Osmose as only six Macros are available for on-board presets. But Overlays ex[pand that greatly allowing for complex synths to be created from a single EaganMatrix preset. Sorry - it's the video's here sound but I think you still get a good idea of the feature set. This describes the version that will run on the Expressive E Osmose.

Note: This only runs on the EL1 and only on the MK2 version due to resource limitations of MK1. It cannot be ported easily to any other platform as the Lua code uses many EL1 specific calls, though the EaganMatrix Overlay preset (dualwaveosmose.mod) used by the Overlay could be reused by another application that could add a similar feature set. All these features come from one single Osmose preset running on the Osmose - controlled by the EL1 Overlay application."

Haken Continuum/EaganMatrix - Morphing WaveBank Pad & Morphing Church Organ Demos

EaganMatrix Programming

"Another morphing preset I'm working on. This one morphs in various ways between two WaveBanks, one set to Saw and the other Square. Shape Generators (SGs) are used to move in and out of the two banks at different rates and there is a bit of shifting between them on Y as well. A big analog Echo is added with additional dynamic convolution change imposed under SG control."

Haken Continuum/EaganMatrix - Morphing Church Organ Demo
EaganMatrix Programming

"Working on a bunch of Morphing Presets for Haken Continuum / EaganMatrix. This one is an organ model that randomly cuts in partials. A pedal controls the speed at which the partials kick in and a separate control is set to Pedal 2 that brings in a Sub-bass and octave beneath the Fundamental (which can be statically set for two octaves below or a fifth below if desired). A small amount of detuning is also used that creates a bit of beating adding more dynamic motion."

EaganMatrix Programming for Osmose - Programming Gestures

video upload by EaganMatrix Programming

"There's a nice video on the Expressive E site that demonstrates the various Osmose gestures, however most of these need to be programmed into a preset. This video presets some of the main ways (there are others) to create and/or configure the ten Osmose Gestures presented on the Osmose site: Tap (Scaled Z SGs), Press (Z Control), Press & Tap, Pitch (vibrato), Aftertouch (Y Control), Shake (Derivative control), Strum (Stepped Z functions), Pressure Glide (Pressure Portamento), Note Off (Release on Z and other options) and various custom combinations of all of the above.

Go here to get the 'Simple Strum' example preset if you want it: https://patchstorage.com/simple-strum..."

EaganMatrix Programming for Osmose - Envelopes (Basic Constructions)

video upload by EaganMatrix Programming

"This video address some of the basics on how Osmose (and to a lesser extent Continuum) presets create envelopes (note I've always used 'an-velope pronunciation vs. 'en-velope) to impose Attack, sustain (pseudo decay) and release profiles and also presents a method to create arbitrarily complex envelope shapes using the new note graphing function. A follow up video will look at use cases for how these envelopes are actually used in Osmose System Presets. Note that you can create traditional ADSR shapes with programming but they are not the common use case when creating Osmose preset profiles.

Simple use cases are presented for applying envelopes to SL/SR output amplitude, applying enveloped for filter cutoff shaping and applying them to modulation inputs, though they are used for many other cases like shaping noise, dynamically altering shape generator frequencies, adding delay effects, etc. Those cases will be covered in the follow up video."

Haken Continuum EaganMatrix Programming - BiqMouth Fundamentals

Published on Jul 1, 2018 EaganMatrix Programming

"Looking at the Haken Continuum EaganMatrix BiqMouth Vocal Formant generator. Here presenting the fundamentals of how to set it up and use its parameters. Next Video will discuss how to use it to get various vocal effects."

Haken Continuum EaganMatrix Programming - Session 9 - Simple Filters and Noise

Published on May 16, 2016 EaganMatrix Programming

"Looking at the different simple filter types available in the EaganMatrix and showing what they all look like using noise input on a PC-based Spectrum Analyzer (not Biquad banks). Not trying to talk technically here - just presenting the basic filter types and controls. You should be able to experiment with them all after this session yourself to hear what they do to input audio of different types other than noise presented here."

All parts here.

EaganMatrix Programming for Osmose using the CVC

video upload by EaganMatrix Programming

"Tested out the CVC connected to Osmose using the Haken Editor and CVC based presets that Expressive E provides in the Utility category. Here's a presentation on the fundamentals of using the CVC both in stand-alone default mode (options selectable in the editor) and programmed through the EaganMatrix.

Note that the Evaton Technologies 'uCVC"' also works if you are primarily interested in monophonic CVC connection (you can chain two together for duophonic operation) but that is not covered here as most will want to maximize using all four CVC channels with Osmose.

Note I also testing downloading Pitch Table Editor (PTE) tunings to the Osmose and they seem to work ok (though the editor is still visually geared for Continuum). So you can explore micro tunings and customer scales including importing Scala files on your modular setup using this connection though I don't go into great detail as PTE is its own video."

EaganMatrix - Analysis of the "Abyss Lands" Osmose preset

video upload by EaganMatrix Programming

"Here's a rather complete analysis of the "abyss lands" preset that is the default preset of the Osmose. This assumes you have basic EaganMatrix programming experience. If you can understand what is going on here - you can understand many of the Osmose presets that use similar techniques of building up a preset in layers. The preset files (requires the Osmose 2.1.21/DSP 10.52 firmware to run) I used to successively build up the preset can be found here for those who want to dig in more: https://drive.google.com/drive/folder..."

EaganMatrix Micro - Using it with MPE Controllers & iConnectivity MIO

video upload by EaganMatrix Programming

"Here's a short demo of playing the EaganMatrix Micro with MPE controllers (Continuum, Linnstrument, Osmose, Hexboard and Electra One MK2 acting as a standard EaganMatrix Midi Overlay controller running my new EL1 Microtuning app for EaganMatrix instruments I will release soon).

Although the EaganMatrix Micro (the least expensive EaganMatrix sound engine-based product) was originally intended for use with the WARBL wind controller using CME WIDI Bluetooth wireless Midi Host, With the right USB Midi Host (here iConnectivity MIO which is the one I find always works best) you can play/control the Micro with any MPE controller onMPE channels up to your preset's max polyphony (or standard controller on channel 1)."

Haken Continuum / EaganMatrix - Programming Morphing Presets

EaganMatrix Programming

"Intro video that demonstrates a few simple methods of morphing between two sounds in a single preset, and if your Continuum has 3 DSPs a simple technique to morph between two separate presets that you have loaded as a combination preset."

Haken Continuum / EaganMatrix - Jenny Oscillator Basics

video by EaganMatrix Programming

"A discussion of the operation and programming of the EaganMatrix Jenny Oscillator (pronounced "Genie") that is included in post 9.0 Haken Continuum and ContinuuMini firmware. The Jenny Oscillator is synced to a Master DSF Oscillator. It has its origins from that used in Georges Jenny's Ondioline (invented 1941), though Lippold Haken has added a number of extensions to this new digital implementation (the only digital model known to be available). Christophe Duquesne had the original idea and with Lippold and Ed Eagan they worked on and implemented this wonderful new addition to the EaganMatrix, ideal for creating a wide variety of reedy timbres with complex harmonic spectra."

Haken Continuum / EaganMatrix Vocal Processing - Making of a Dalek

video upload by EaganMatrix Programming

"Presenting the basics of simple vocal effect processing in the EaganMatrix using the Slim Continuum in this case. Here showing how to create a Dalek-like ring modulated vocal effect using the EaganMatrix Multipler. For Continuum and A/D converter is required. For the soon to be released EaganMatrix (Eurorack) Module, you will be able to send analog audio directly into the EaganMatrix for processing."

Haken Continuum / EaganMatrix: Using the ContinuuMini as a W,X,Y,Z Eurorack CV Controller

video by EaganMatrix Programming

"Demonstrating one of an almost infinite ways to use a ContinuuMini with Evaton Technologies uCVC as a four degree of freedom (WXYZ) controller for Eurorack systems (though it could be used this way with any system that uses CV input to manipulate sound parameters). Here the Mini primarily controls a TiNRS Tuesday Sequencer and Rabid Elephant Natural Gate that are really 'running the show' (not ContinuuMini pitch and envelope control). EaganMatrix CVC programming is used to impart a much more complex CV interaction that would be possible with a traditional XY CV (for example joystick) controller. Note with only a ContinuuMini and a uCVC, you will ideally want to set your preset Polyphony 1 to avoid discontinuities when playing polyphonically which is not the intent here but you might do it without realizing it (not using ContinuuMIni audio output at all here)."