Trogotronic WaveWraith 673

video upload by The Mephitif

"First 5 minutes with Trogotronic's Desktop Synth"

Zerosum Inertia ZI52

video upload by The Mephitif

"First test with Zerosum Inertias recreation of the Metasonnix R52 multimode filter.

Signal chain is:
Hertz Donut MK3 - Metasonix RK2 - ZI52 - TVM23 - Audio Interface - FabFilter Plugins"

The zi52 is a recreation of the metasonix r52.

This is a zerosum inertia product with permission granted from metasonix.

Metasonix wants it clear that zerosum inertia is responsible for the questions, support and manufacturing of the product.

It is a resonant equalizer/resonator/filter useful for tone sculpting and scream generation when at high resonance settings.

Two 12aw6 pentodes are responsible for the character of the sounds processed and created.

12aw6 have an amplification factor of 42 mu compared to 36 that a 12au6 provides.

The 12aw6 has a distinct resonance tone that is not found with a 12au6.

It is fizzley and sounds like a fuzzbox at max resonance.

Backing off the resonance allows for smooth filtering without oscillations or squeals.

The resonance is technically a gain function and needs to be up a bit for sound to pass through.

The input knob affects the resonance behavior and general overal sound of filtering heard.

To hear the filtering effect, backing counter clockwise on the input level is needed.

Increasing the input level creates more saturation but overloads the filter and less 'filtering"'is heard.

CLICK FOR MORE »

Piston Honda MK3 Videos by The Mephitif

br>video uploads by The Mephitif

Playlist:

1.Piston Honda MK3 Video 2

Second time visiting the Industrial Music Electronics Piston Honda MK3, this time with an emphasis on the softer sounding things. This is a raw video with no prior knowledge of the wave banks, just an attempt to look at some of the various wave-sets with an emphasis on the unison voice features. VERY BORING.

2. Industrial Music Electronics Piston Honda MK3

Playing around with the presets, FM amount, and xyz axis of the Industrial Music Electronics Piston Honda MK3 for the first time. Sorry for the crappy cell phone video.

3. Harvestman Piston Honda MK2 Feedback

The Piston Honda MK2 being fed into it's FM input via VCA 1 of the Double Andore MK 2 a mix of it's own output, and the outputs of the Hertz Donut MK2 and both oscillators of the Kermit. Topped with some heavy verb.

7/31/23 Metasonix RK8 Filterwall + SSL 1660 + MooSonics Vanilla VCA/Envelope + PCM 70 (gated plate)

video upload by Cfpp0

"A maiden voyage into the latest glory hole from Metasonix."

via Metasonix

"The RK8 contains six bandpass filters, which use vacuum tubes. They are simple 'twin T' designs. Each filter is about one octave lower in range than the one to the left—treble on the left, bass on the right.

Each filter may be manually swept with its own separate tuning knob, over approximately one and one-half octaves. Or ALL the filters may be swept together, using either the 'MANUAL TUNE' knob, or the CV input, which overrides the knob when a patch cable is inserted. Although it is capable of some conventional swept-filter effects, the RK8 is more useful as a complex equalization system or for unique special effects.

Resonance is separately adjustable for each filter. Usually the treble filters will resonate strongly and oscillate under some settings. The bass filters might not. It’s a strange monster.

Inputs and outputs are compatible with all Eurorack and other modular synthesizer equipment. The output peak voltage is limited to the supply rails and can’t damage other modules.

Don’t assume you know what you are getting here—the RK8 is unlike anything else ever marketed. Also don’t expect it to track VCOs. Its voltage-to-frequency curve is 'more or less' hertz-per-volt but can’t really be guaranteed. The six vactrols in each RK8 were hand-matched, but can’t be expected to remain matched, or to track together perfectly.

Again, everything about the RK8 is abnormal. It is not perfectly 'clean' and perfectly 'distortionless', and it cannot be made so. Because it uses vacuum tubes.

It is something you have NEVER seen before. It can NOT be compared to any other product, ever made, PERIOD. Do not walk into this with 'preconceptions'.

Specs: 32HP width Eurorack module, with circuits protruding about 1.5″ or 38mm behind panel. The RK8 uses six 5702 subminiature pentodes, all Raytheon US military surplus from the 1980s. Power supply required is about 600 mA after warmup and 1.4 amps when started cold from +12v, and 10 mA from -12v. Low-cost power supplies are NOT recommended. A spare tube is included, although soldering equipment is needed to replace any of the tubes. They are run very conservatively and will last many, many years."

Metasonix RK8 Filterwall Demonstration 1 SD 480p

video upload by Endmusik Records

"Metasonix RK8 Filterwall prototype demo - video 1.

Modules used: Hexinverter Mutant BD9, Mutant Snare, WMD Crater and Kraken, Moog DFAM, and some live percussion samples from the 1010 music Bitbox.

This is an un-edited 13 minute session of experimentation with direct audio recording to showcase the tonality of the prototype as it processes these sounds. When audio stops and comes back in that is me bringing up a separate mixer channel of the raw audio unfiltered as a comparison, which is then muted out and the RK8 direct channel is brought back in."

Metasonix RK8

video upload by The Mephitif

"Some examples of the Metasonix RK8 Filterwall. First clip is of the Industrial Music Electronics Hertz Donut MK3 running through the Filterwall. Second clip is the Filterwall acting as a sine bank. Third clip is some bad drumbeat being processed through the Filterwall."