Line 6 Midi Mobolizer and the NLog Midi Synth

YouTube via JCRUDESS | October 01, 2010

"A fantastic new midi interface meets one of the coolest synths for the iphone/ipod touch. The Line 6 Midi Mobilizer is a small but well built interface that plugs directly into the dock connector of your device. Very easy to use and connect. Nlog creates fantastic synthesizers of iOS devices! What a great combination! I wanted you to know about this technology- so here it is!!!"

iPads on Ebay
iPads on Amazon

iPod Touch on Ebay
iPod Touch on Amazon

Line 6 MIDI Mobilizer on Ebay

RIP: Debukas Tribute To Aaron-Carl - My House

YouTube via rottenrow | October 01, 2010

"A tribute to Detroit house legend Aaron Carl, who died on 30th September 2010. This is a version of his tune, "My House", or more specifically the Dennis Ferrer remix.

Gear: Roland MSQ-700 sync-ing TR-909 and MC-202 and sending MIDI to Jupiter 6. SH-101 bass notes triggered by 909. 202 thru WEM Copicat IC300. 909 thru Drawmer 1969. Jupiter thru JoeMeek VC2. Delay coming from crappy Zoom 1201 (I love 'em)."

"Dark Signals" by Mark Mosher (Live Rehearsal Video)

YouTube via newechoproductions | October 01, 2010

"'Dark Signals' is a song from my album I Hear Your Signals. This video is in HD and I captured the audio full fidelity right from my sound card in real-time and made note edits. It's one of my favorite songs off the album and is becoming a crowd favorite at live shows. A dark original electronica song with driving big beats, bit-crushed high-hats, a dash of ambient texture, and tasty distorted synth leads. Checkout the rippin' synth solo at the 1:42 mark performed live from a Tenori-On matrix controller sending notes to a virtual synth running in Ableton Live. The Moog Etherwave Theremin signal is being converted from analog back to digital and is driving virtual synths as well.

You can buy the album name your prices ($0 for Free) over at http://markmosher.bandcamp.com.

Mark Mosher
www.MarkMosherMusic.com"

Yamaha CS10 movie_0001.wmv

YouTube via ikworgek | October 01, 2010

"Some sounds made with my Yamaha CS-10, Kenton Pro-solo and Spectral audio cyclus sequenser"

HighSage Acid Beast

YouTube via shagghie | October 01, 2010

Inside the Oberheim DMX

YouTube via EA78751 | October 01, 2010

"http://ericarcher.net/2010/10/01/insi...

A quick look into the sound-generating mechanism of Oberheim's platinum hit-making drum machine from 1981, the DMX."

STG .MIX Eurorack Module

STG .MIX Eurorack module Raw from thonkblog on Vimeo.

"Here's the sound of the STG .MIX Eurorack module.
4 different waveforms from a TipTop Z3000. Not too noticable on the Square, but as I change the waveforms the clipping effect (apparently based on the Moog CP3 module) becomes very apparent."

STG .MIX Eurorack module filtered from thonkblog on Vimeo.

"Sine, Tri and Saw from a TipTop Z3000 filtered through a Make Noise QMMG. If you watch closer for the 'flatline' at the peak of the waveform you can see as the clipping takes place."

The .MIX is a 4HP eurorack mixer with 3 inputs and a bipolar output with a makeup gain stage lifted from the Moog CP3. They'll be available to order from Analogue Haven by Monday (most likely).
http://stgsoundlabs.com/

Resonant Pavilion (design 1)

Resonant Pavilion (design 1) by starvelab
http://starve.org/resonant.html
"The Resonant Pavilion (2010)
by Michael Trigilio (of Neighborhood Public Radio)
Created to accompany the opening of the new RESNICK PAVILION at the Los Angeles County Museum of Art (LACMA).

An interactive soundwork designed to be heard in and around the new Resnick Pavilion at the Los Angeles County Museum of Art.

Call 1-888-361-4NPR (4677) and sing-along, respond, or create any other sound over-the-phone. These interactions will be folded into future iterations of the soundwork in an ongoing podcast hosted by LACMA.

made using: Dewanatron Triple Slice, 4MS Noise Swash. Wiard Borg Filter, Wiard Oscillator, Moog Moogerfooger Ring Modulator"

RARE SYNERGY SYNTHESIZER SIA BOARD

via this auction

"This Synergy SIA board is part of what you need to convert an original Synergy I synthesizer into a Synergy II+. A Synergy II+ is the commercial version of the Bell Labs Digital Synthesizer, and a Synergy II+ lets you program the Synergy synthesizer by an external computer (a Kaypro II) to load voices and store them on floppy disc and program timbres using CP/M software called SYNHCS (SYNergy Host Control System). The SYNHCS version 3.182 CP/M software for Kaypro II was included along with this Synergy SIA board and it has the complete Synergy voice cartridge library on Kaypro CP/M disc and the Synergy SIA board. SYNHCS v 3.182 is the lsat and most complete version of the SYNHCS software for controlling and editing the timbres on the Synergy synthesizer, and it's also insanely rare. As far as I know, no one else has SYNHCS v. 3.182 from 1985. Everyone else seems to have SYNHCS v. 3.15 from December 1983. As you can see, this board comes in two parts including MIDI ports because adding MIDI to the Synergy I synthesizer is part of the function of the Synergy SIA board."

Ludwig Synthesizer Phase II POSTER Fuzz PSYCHEDELIC

Note: links to listings are affiliate links for which the site may be compensated.
via this auction

"It's a LARGE 17" X 24" and looks amazing framed."