Thursday, February 10, 2011
Roland R8-SN-05 07 and 11 ROM Play Demo Songs
YouTube via zibbybone | February 10, 2011 |
"To complete the demo songs of the R-8M and all the seperate ROM cards, here are the final 3 cards: Jazz, Mallet & Metallic Percussion. Go to my YouTube Channel to find 2 other videos of the R-8m's internal demo song and the other 8 cards' demos. All songs Copyright Roland Corporation."
Studio Porn : Octatrack having fun with the oldies
YouTube via kidysputpikii | February 10, 2011 |
"the new kid finally have fun with the gang :
10 min of improvised jam playing with a very limited numbers of patterns
-Display of the whole studio at the end
-Octatrack is playing the kick drum, some drumloops, the bass line (juno in the first place) in flex machines and some very long sample of my juno 106 lead / chord in a static machine. main outs to xone vf1
-Tr808 and Tr909 are both filtered by the mutator (slaved to the octatrack)
-Linndrum is triggered by the apc 40
-The bitcrushed synth is the juno 106 trough ensoniq dp4 sequenced by Ableton live (slaved to the octatrack)
-Mixing and recording in ableton live with a motu 828 mk2
My camera stopped recording after 8 min that is why i had to add some other kind of footage :)"
dSeq + ADASYNTH
YouTube via LSDProgramming | February 10, 2011 |
"dSeq is a touch screen sequencer module with 2 voltage and one trigger output.
it was a project i did for a class at Wayne State using a project kit called inex itouch."
mungo enterprises dDS

"the mungo enterprises dds is a two channel synthesizer for the production of percussive sounds. both channels have independent outputs for further processing and they can be triggered independently or together. all the parameters are available as individual knobs on the front panel and can be automated over midi.
memory
the unit is equipped with 128 patch memories that store all the settings of the front panel. to retrieve a patch send a program change message to the device. to store a patch press and hold the save button while sending a program change message to the device.
link mode
the noise channel can be transposed to play together with the tone channel for combination drum sounds such as snares. to enable the link mode press and hold the button between the two channels. the activity light of the noise channel inverts to indicate the link mode is operating.
tone channel
a sine wave oscillator fed through a constant power limiter and an amplitude envelope with adjustable curve.
the controls, from left to right:
attack, initial phase of the signal when triggered.
pitch, base frequency of the oscillator.
pitch envelope gain, amount of pitch modulation.
pitch envelope decay, time constant.
drive, gain of signal before the limiter.
amplitude curve, blend from exponential to linear.
amplitude decay, time constant.
noise channel
this channel comprises a noise source fed through a constant power bandpass filter and an exponential amplitude envelope.
the controls, from left to right:
filter frequency, center frequency of passband.
filter width, total width of passband.
amplitude decay 1, time constant for the lower note.
amplitude decay 2, time constant for the higher note.
to hear the dds in action, listen to this sound clip. the entire demo was done in a single live pass with a pair of dds units run into a yamaha 02r for a touch of reverb and eq, with all the parameter tweaking done on the unit itself."
http://mungo.com.au/dDS.html - audio sample on site.
via Analogue Haven
Mungo Enterprises State Zero Synthesizer Available

This one in via Willy: "After Mungo State Zero synth presentation @ winter namm 2010, and an annouced price near 12 000$, I was not able to find any info on this product since then. But today as I was going to order tiptopaudio stuff @ schneidersbuero I finally found with surprise Mungo State Zero for sell and price is 6590€ VAT included ! (nearly 8900$ but with 19.6% VAT here in Europe)."
"State Zero, Modules
* Oscillator x4 Inputs: Reset
* Parameters: Frequency, Phase, Waveform Symmetry
* Mode: Sine/Square/Saw
* Low Frequency Oscillator x2 Inputs: Reset
* Parameters: Frequency, Phase
* Mode: Sine/Triangle/Saw
* Envelope x4 Inputs: Gate
* Parameters: Level 1/2/3/R, Rate 1/2/3/R
* Filter x4 Inputs: Signal
* Parameters: Frequency
* Mode: HP24/LP12/LP24
* Exponential Amplifier x2 Inputs: Signal
* Parameters: Level
* Comparator x2 Inputs: Signal
* Parameters: Level
* Sample and Hold x2 Inputs: Signal, Trigger
* Slew Rate Limiter x2 Inputs: Signal
* Parameters: up rate, down rate
* Curve and Quantize x2 Inputs: Signal
* Parameters: Curve, Quantize
* Mixer x4 Inputs: Signal 1/2/3/4
* Parameters: Level 1/2/3/4
stock
immediately available"
Analogue Heaven is the dealer for the US:
http://www.analoguehaven.com/mungoenterprises/ - not seeing it listed but you can contact them on availability.
Beatmaker 2 Chop Lab
YouTube via bridgealantee | February 08, 2011 |
"Chopping a break in Beatmaker 2"
iPads on eBay
iPod Touch on eBay
Cushion E.P.
YouTube via jonowise
"Tracks made on Ipod touch going thru jasuto patch on ipad, get the tracks http://soundcloud.com/jonowise/sets/cushion-e-p-raw-version"
"Main Apps were BleepBox on ipod touch going thru a Jasuto patch with digital feedback patch and also Ikmultimedia amplitude (free ver) on ipad in some cases"
White Noise Audio Software (bleep!Box)
Chris Wolfe (Jasuto)
IK Multimedia
iPads on eBay
iPod Touch on eBay
Hardware Girls


via Jaapan.com
"Hardware Girls is the new photo collection from the prolific artist / photographer / model / idol Julie Watai. At a crossroads of different influences, she takes the Akihabara otaku world and mixes it with video games, Japanese pop culture and pretty girls. Julie Watai photographs 25 models / idols, each armed with a cult accessory: old games console or other cyber-gadget. The result is a collection of portraits of beautiful, lascivious electro-nymphs."
via Davide

PREVIOUS PAGE
NEXT PAGE
HOME
© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH













© Matrixsynth - All posts are presented here for informative, historical and educative purposes as applicable within fair use.
MATRIXSYNTH is supported by affiliate links that use cookies to track clickthroughs and sales. See the privacy policy for details.
MATRIXSYNTH - EVERYTHING SYNTH